Your cart is empty.
Your cart is empty.Product Description
Widely used：Suitable for most standard and high torque servo motors, compatible with Hitec, Parallax, Futaba, TP Power and other brands MG995 MG996 TR213 standard servos, etc.
Outback Joe
July 28, 2025
First thing I did was to test each servo. They all work and rotate 60 degrees as they should. The rotation is quiet and smooth, with no jumpy action thru the travel range. The connection leads are 9.5 inches long and are soft and easy to route. Two of the servos in this set are going into a balsa glider, and will be covered over with no way of getting them back out without cutting the covering open. This is the reason for the need to use metal gear servos in this application.Mine are branded Tower Pro, which is a good brand that I have used many times before. They are overall 32mm tall, from the base to the top of the splined gear, 12.3mm wide and 22.6mm long (32.2mm including the mounting flanges). Each servo's comes with 3 control horns, one control horn screw and 2 mounting screws (see Photos).These are well worth the $3.60 each. Highly recommend these if your model will be used in rough service!
Deanna Mears
July 18, 2025
We were in a bind trying to figure out how to do the head movement on some animatronics and these worked great!
RC
July 3, 2025
Good to have on hand
John
July 1, 2025
I got these to replace all the Horizon Hobby/E-flite servos that went bad quickly. These metal gear servos work great at a great price.
Customer
May 23, 2025
This item has no screws. Also no side bearings for pan/tilt application.
Harold
May 2, 2025
Didn't come with enough screws to secure all horns
Ken T
April 4, 2025
So far so good. No problems with them yet. Work as intended. Good bang for the buck.
steveo
February 23, 2025
The bracket kit doesn’t come with any mounting hardware… which is like selling SOES WITHOUT SHOELACES. Why would you do that?!? Everything is technically as advertised, servos work fine. But be warned- if you purchase servos and brackets, you still won’t be able to assemble anything.
UBcanada
February 8, 2025
Une petite différence de hauteur avec MG 90
Ing jesus lopez
November 20, 2024
Se ven de muy buena calidad y con engranes metálicos
Recommended Products