Your cart is empty.
Your cart is empty.2pcs 2.5" to 3.5" Hard Drive Tray Holder for PCI SSD HDD Metal Mounting Bracket Adapter, Installation Suggestions: 1. Interval installation. Higher shelf, not affected by the motherboard, compatible with chassis with motherboard on the bottom. 2. Horizontal placement: Because it is fixedwith a single screw, it can effectively solve the problem of heavy force on the hard disk. 3. Vertical placement: Place the bottom of the motherboard and fix it with EVA cushion.
rosaliepryce
2025-08-29 14:56:22
The product works as intended take note that the Brackets aren’t the most sturdy so make sure you don’t place any important drives DIRECTLY under your GPU BEING THERE IS NO HEATSINK FOR THE HDD
aznfl
2025-08-11 10:30:58
I didn't even know that an item like this existed before I came across it while browsing for a mounting adapter that could hold two ssds or 1 ssd and 1 hdd. This product was a great find as it met the additional disk mounting needs that I had with my current server case. While it worked well for me, I knocked it down a star due to some caveats that a potential buyer of it should be aware of prior to purchasing it.One, if your case is similar to mine and you mount this adapter to the slot nearest to the side of the case, there won't be enough room to mount a hard drive. Two, if you mount the adapter next to each other without an empty slot between them, there won't be enough space to mount a hard drive. If you leave a one slot gap, there is room. Please see the photos that I uploaded with this review.Three, the edges on these would benefit from either filing them down a bit or taking a deburring tool to them. Four, due to the way they are mounted to an expansion card slot using a single screw and no card slot to connect to below. There is some side to side movement, which is to be expected.If you are aware of the above caveats and are ok with them, these mounting adapters will likely meet your needs.
Wayne Mitzen
2025-08-09 10:24:51
They are called ISA brackets since the days of DOS PC's....
Spberg
2025-08-07 10:28:07
Good price - Easy to Install - Works Fine. I bought this to install a 3.5 inch HDD into a Dell Inspiron. The Inspiron didn't have docking spots for 3.5 inch. This was a cheap and effective way to mount my HDD. Very happy with ease of installation. Screws to mount HDD came with the holders. Can use for 2.5 inch drives as well, although Inspiron has two locations for mounting 2.5 inch drives.
Brian W
2025-04-27 17:43:50
Was trying to find a good mounting solution for the NAS I'm building and this was the perfect solution!
Gc
2025-04-21 10:45:52
I needed these to revamp some old PC and put all the old drives on them. I tried to 3d print these trays. It simply wouldn't work. Either crack or wobble and hit other drives. These metal ones are so sturdy and strong that once you screw it on, it becomes part of the case!
Shpp
2025-02-04 13:32:53
Sehr stabil und man kann gleichzeitig eine 2.5" und eine 3.5" Festplatte an eine Halterung anbringen.Leider war eine verbogen angekommen. Eigentlich aufgrund der Stabilität überraschend, Versand in einer gepolsterten Tasche scheinbar dennoch nicht ausreichend.Rückversand und Gutschrift problemlos abgewickelt.
Wolf
2025-01-30 18:31:02
The Mounts will bend and sag because they are not welded in both corners to prevent Bending and sagging once an IDE HDD has been Installed best application for these is an SSD only as any HDD IDE is too heavy for them to support yet they are advertised as being good to Mount both IDD HDD's and SSD HDD's.
Recommended Products
$25.99
$ 11 .99 $11.99