Your cart is empty.
Your cart is empty.Product Description
VACUUM CHAMBER KIT WITH PUMP
Vacuum Chamber Kit with Acrylic Crystal Lid
P PBAUTOS vacuum chamber kit can be perfectly equipped with single or dual stage 3 to 9 CFM pumps. It is suitable for household air conditioning, automobile maintenance, vacuum packaging, refrigerator vacuum, industry. The vacuum chamber is applied to degass silicones, epoxies, essential oils, and urethanes, etc. The acrylic crystal lid is not applicable to wood stabilization and other experiments with volitile compounds.
4CFM 1/3HP Single-Stage Rotary Vane AC Vacuum Pump
Features:
High efficiency & Low noise
Easy start-up & High volume cooling fan
Humanized external design & Portable valve design
Caution:
The vacuum pump is shipped without oil, please add oil before operation.
The vacuum pump can not extract inflammable, toxic, or corrosive gas or particulars.
The temperature of extracted gas can not be over 80℃, and the proper environment temperature is -5℃~60℃.
The vacuum pump can not extract air for long time, or it may be damaged due to oil-free operation.
Warm Tip:
About the oil leakage issue, because every vacuum pump is tested and operated with oil before shipment, after that, the oil will be poured out, but there may be a little rested in the pump, which may cause oil leakage during the long transportation. If you find the oil leakage on the surface when receiving the product, just wipe it and then use.
Specification:
- Model: RS-1.5
- Voltage: 110V/60HZ
- Free Air Displacement (FAD): 4CFM
- Ultimate Vacuum: 5Pa
- Power: 1/3HP
- Oil Capacity: 225ml
PBAUTOS Vacuum Pump Features
Good-quality pump material
Lightweight cast aluminum construction shows the maximum durability; Direct-driven motor makes it easy to start up; Built-in cooling fan can protect the motor thermally; Upgraded large oil fill cap for good sealing
Strong heat dissipation
The built-in thermal protection design and enlarged heat dissipation window make it has rapid heat dissipation which keeps the vacuum pump running well in most cases.
Humanized pump design
Oil viewing window allows you to observe the oil level and quality at any time; Handle design comes with rubber and allows you to carry the vacuum pump easily.
Packing list
- 1* vacuum chamber
- 1* pressure gauge
- 1* PVC hose
- 1* non-slip mat
3 Gallon vacuum chamber with acrylic crystal lid
Perfect for resin casting, degassing essential oils, not for stabilizing wood
- This vacuum chamber is not recommended to be used for stabilizing wood and other experiments with volitile compounds, because wood stabilizing resins and volitile compounds are highly corrosive to polycarbonate and acrylic. Thus the lid may crack soon in the wood stabilizing operation.
- In order to achieve better sealing, the new batches of vacuum chamber are provided with two rubber seals, if the item you received does not have two rubber seals, please contact the seller for help.
- Chamber Dimension: 9.84"*9.84" (Without Lid)
- Volume: 3 Gallon
- Lid Diameter: 11.02"/28cm
- Thickness of the Lid: 3/5"
PBAUTOS Vacuum Chamber Features
Accurate Pressure Gauge
Upon special treatment, the gauge reading is accurate. The outlet valve has an air filter to reduce airflow and prevent dust from entering the chamber.
Double Rubber Seals
The new batches of vacuum chamber is provided with two rubber seals, one is on the lid, the other is on the chamber edge, which is perfect for better sealing when vacuuming.
Durable Stainless Steel
The vacuum chamber is made of high-strength stainless steel, it is good at corrosion resistance, heat and chemical resistance. The high-quality materials can hold a high vacuum for several hours.
nelson hamel
September 3, 2025
After reading reviews, I was a little concerned about this product, however, I had no problem putting together, the poly lid didn't brake, gauge works, compresser not noisy, worked as expected. Packaging of motor oil could be better, it leaked during shipping . I would recommend.
Thomas O Barnes
August 24, 2025
This is exactly what I needed to make good resin castings. Works great
Andy Blanc
June 23, 2025
Worked for a day with no issues. After being used the next day the pump lost more than half of the oil from a leak in the bottom of the unit. Not a visible leak, probably a small leak from a seal. The chamber works fine, the pump is not good at all. Even the oil cap on the pump is not very sturdy
The Cook
June 10, 2025
Good quality product
Angela
May 30, 2025
Just what I needed for My resin project
C W
May 13, 2025
I have no idea what kind of oil the vacuum pump takes. The instructions say to add oil, but there was none in the box. The hose clamps are garbage that stripped out upon tightening. I feel ripped off. Definitely will avoid this brand in the future.
Customer
March 28, 2025
I use it to degass casting epoxy, does a great job on small batches it looks and sounds bigger than it is , in the pictures. Make sure you buy vacuum pump oil, mine came empty, and it won’t work with out it.
paulecrouse
March 12, 2025
This thing is the biggest piece of junk! Don't buy it. I purchase this for a future project I was going to be doing for both wood stabilization and resin pours. First time use and the glass is shattered although I followed the installation manual to the letter. unfortunately I was not able to get to the project in time before the return policy from Amazon had run out and you cannot contact the manufacturer directly via email or any other means ( based out of China) the "contact seller" link does not work and if you try to go into chat it directs you to Alibaba.com which ( when and if you can contact someone) they say you have to contact the manufacture via their website and Alibaba refuses to give you the contact information of the company. looks like i am going to have to find a local plexiglass company to see if I can get a piece cut to spec for this thing.
Dave Esmonde-White
December 30, 2024
I received my vacuum chamber in good time and in good condition, I've not been able to test its as the sealing nut was missing from the assembly package, fortunately I was able to find a suitable replacement at the local hardware. More importantly I've had to purchase a separate 110V-220V convertor as the pump is 110V. This really should be stated in the listing. Also I see from the documentation that the pump manufacturers do make a 220V version - why not offer this as an alternate?Despite the hiccups, I'm looking forward to using this.
Recommended Products