Your cart is empty.
Your cart is empty.Product Description
Safety Instructions - Learn and respect your tools
- Be sure to have a firm grip on the angle grinder with both hands and slowly remove the wood.
- Do Not install carving disc on any grinder that requires mechanically modifying the safety guard to achieve proper positioning.
- Wear goggles and heavy-duty work gloves during set up. Unplug the tool from its electrical outlet before performing set up procedures.
- Do Not Carve wood containing foreign objects. Remove all screws and staples before using carving disc.
- Store indoors out of children's reach.
- Practice on scrap material a few times before use to ensure proper technique.
Rocky Kimbrell
2025-08-19 15:28:11
Quick and efficient and awesome quality materials it's made of
Paul
2025-08-17 12:03:42
These are a decent set of wood carving tools. It won’t last forever since it’s not carbide. But it works fairly well.
Eric
2025-08-09 16:13:05
As described heavy duty 1st product in awhile from amazon that wasn't trash well worth the money
Tom
2025-07-05 16:58:04
These worked fairly well but the vibration is so bad on every one of them, I couldn’t use them. My hands are numb from less than 5 minutes of use.
JohnP
2025-06-18 12:23:11
More comments once I have used the dits more
Jamee Patrick
2025-06-14 10:17:38
The media could not be loaded.
David Larose
2025-06-13 09:12:01
The media could not be loaded.
DSulkey
2025-06-07 17:41:31
This was a gift for my husband and he loves them!
rob
2025-05-29 14:59:31
I am always careful when using unusual bits on an angle grinder - the speeds and torque involved mean that things can go very bad in a hurry. So - please be very careful with these bits and watch for kickback!I tested all 3 bits on a very old, very rough piece of 2x4. I expected that these would not provide a fine finish and was not surprised.First up, the rotary rasp - it worked fine and removed wood fairly well and left a ridged finish. All of these bits are difficult to control and are for rough work. There is no way that I would use any of these to try and get close to a line, but if you just need to get rid of a high spot or roughly carve out a shape, they work.Next up was the ball - it worked well and chewed through a very hard old knot very easily. I did notice that it burned the wood more than the rotary one. I also really felt it following the grain of the wood.Finally the grooving tool - this is the scariest of the bunch! It has only 3 cutting edges and is very prone to catching - make sure that your workpiece is held down securely, that you have the aux handle on your grinder, and that you are paying attention and planning for the inevitable kickback.This leaves a pretty ragged grove and you can see in the pictures a lot of tearout of the wood.An angle grinder is very limited in how you can approach the wood and the body of the grinder often forces you to cut on an angle - you may be able to see in my last picture attached that the groove is tilted since the grinder body would not allow the bit to be rotating perpendicular to the wood.
Gorden
2025-03-11 15:09:37
The Pomsare 3 PCS Upgraded Wood Grinder Ball Gouge set is a must-have for woodworkers, whether you're a professional or a hobbyist. These tools are designed for precision wood carving, hollowing, and slotting, allowing you to create intricate and detailed designs with ease. The set includes three different sizes of ball gouges, each with a 5/8-11 thread that fits perfectly on 4 1/2 and 5-inch angle grinders. This compatibility ensures you can seamlessly integrate these tools into your existing setup without any hassle. Made from high-quality carbide steel, these ball gouges are incredibly durable and can withstand heavy use without losing their sharpness or effectiveness. The spherical shape of the gouges allows for smooth and controlled carving, reducing the risk of gouging or damaging your workpiece. Whether you're working on a large project or adding fine details to a smaller piece, these tools will enhance your wood carving projects and make the process more efficient and enjoyable. The Pomsare ball gouge set is an investment that will pay off in terms of both quality and versatility.
S.
2025-03-03 17:24:55
A bit on the pricy side but they work great at boring through wood! They attached securely to my angle grinder and ate through the wood like a hot knife through butter. So satisfying woth how fast and easy it goes! I tested it on maple which is considered a hard wood. They were all still in good shape when I was trough. They performed well and I'm very happy with them. They get a solid 4 stars!
Lisa
2025-02-25 17:59:42
Will be used on tree trunk project,Cannot comment on cylindrical grinder.Round ball has all the right things to grind a spruce 2x4 to shredsAnd same goes for the grooving attachment.I can only imagine what the third one would be like!Fit well in the small grinder and easy to handle,The guard would worth putting on for the time when you rest it.
Customer
2025-02-02 15:11:09
This 3-piece wood grinding set is a fairly decent set for shaping and sculpting wood with an angle grinder. The attachments fit any standard 5/8-inch #11 thread grinders securely and cut through wood reasonably well, making them good for more detailed work.They work especially well on softer woods but can handle hardwoods like maple too, just takes longer and you have to be not as aggressive. However, vibration and wobble issues happen often, which makes it difficult to use for extended times. A bit pricey, for the balance issues I had and as well as other seem to be seeing. It is not that difficult to balance these at the factory and would only add $1 to the overall price. That is the biggest downside I see.3.5-Stars
Recommended Products