Your cart is empty.
Your cart is empty.Product Description
“Woodworking has never been this easy and fun.”
- Want to get started in small woodworking projects, but didn’t know what power carving tools to get?
- Are you a woodworking professional or a DIY enthusiast, and would like to tackle some fine-grained engraving?
- Are you looking to buy the correct US standard ball gouge without installation issues?
Pomsare Sphere Rotary Burr can meet your requirements!
Pomsare Sphere Rotary Burr (5/8-11 threads)
FINE POLISHING TREATMENT
The sphere rotary burr for angle grinders ensures fine and clean grinding of wood. Excellent for rough work, moderate shaping, contouring and grinding.
LONG LASTING SHARP
Made of carbon steel, the ball grinding wheel has first-class durability with less wear and can serve for a long time, delivering good results in soft wood such as spruce, pine, linden, beech and so on.
EASY INSTALLATION
You don't need any additional adapters. With the 5/8-11" mount, the sphere rotary burr for angle grinders from Pomsare is compatible with 4 1/2 and 5" US grinders.
Product Specifications
- Grit: Fine
- Material: Carbon Steel
- MAX RPM: 12000
- Total Height: 4.3 Inch
- Grinding Ball Diameter: 1.57 Inch
- Weight: 15.5 Ounces
- Package: Box
Sphere Rotary Burr is great for creating concave surfaces for wooden bowls and spoons.
TIPS:
- Please make sure your grinder shaft is US standard 5/8-11" threads.
- Teeth can be cleaned with a sharp needle or wire brush.
- The product is solid and heavy, weighs about 15.5 ounces, and is more suitable for small woodworking projects.
- An adjustable speed angle grinder is highly recommended, as the RPM can be adjusted according to your needs for perfect shape.
- Please do the necessary tests with some scraps before starting to engrave. Practice multiple times to get used to the tool.
- If there is any looseness, please adjust the installation position in time for safety.
- Be sure what ever you are gouging is fastened down.
WARM TIPS:
- To keep balance, always use the Flange Lock with 5/8-11 inch thread during installation
Safety Instructions - Learn and respect your tools
- Be sure to have a firm grip on the angle grinder with both hands and slowly remove the wood.
- Do Not install carving disc on any grinder that requires mechanically modifying the safety guard to achieve proper positioning.
- Wear goggles and heavy-duty work gloves during set up. Unplug the tool from its electrical outlet before performing set up procedures.
- Do Not Carve wood containing foreign objects. Remove all screws and staples before using carving disc.
- Store indoors out of children's reach.
- Practice on scrap material a few times before use to ensure proper technique.
Marco
2025-08-31 18:57:14
The media could not be loaded.
Denise T.
2025-08-25 21:38:57
Works great
Captain S.
2025-08-10 12:46:37
This works better than I had hoped it's very well made and will last a must have tool for wood workers im really happy with it thank you
Matthew Hricko
2025-08-09 13:39:53
This is really a pretty good product for the money. It will struggle and burn really hard woods but it works well on the lower hardness woods. Definitely a great way to make a spoon or a small bowl if your into that sort of thing. I would recommend it as the alternative is 4-5 times the price of this product. But be advised that it is common for this and other attachments to get permanently stuck on your angle grinder.
Lee Poulin
2025-08-01 18:40:25
I work with a lot of wood, and this was just what I needed.
Steve Eikenberry
2025-07-31 10:33:34
I mounted this in my grinder and when I turned it on the whole thing shook really badly. It is obvious this burr is not balanced and is out of round. It shakes to the point it is not safe to use. I have other burrs I use in my grinder and they work perfectly and do not vibrate or shake so I am confident this is a defective product. I read a few other reviews that also said it vibrates so it appears the quality control is poor on this product. I am returning it.
Kindle Customer
2025-07-23 19:54:24
Carver came with a rusty shaft, apparent tool marks and dusty. Looks used.
William Clark
2025-07-15 19:30:09
Things are shaping up
Steve R.
2025-07-01 14:33:32
I used it to carve some queen ann style legs in hard maple. I attached it to a rigid cordless grinder and it craved without a issue. It has better control than the chainsaw on a disc and the dome cutter. A good add for the tool box and not crazy expensive as the brand name.
Arseneault Family
2025-03-21 15:24:54
The minute I tried it I knew something was wrong. 😑 I needed it to carve cavities in a piece of wood. The grinder I used works really well usually but with this attachment it was vibrating and oscillating so hard in my hands it was impossible to hold steadily. I ended up returning it and getting a professional woodworking one from a different website, that one did not vibrate and was way more stable. I think it was off axis, the manufacturing of this one or the engineering was not well made.
TD
2025-03-20 15:04:57
The gouge is not true, it wobbles as it rotates. Basically useless, hopefully I can return it!
Erin Breeze
2025-02-14 12:27:25
This item wore out from one use just on ash hard wood. About 30 minutes of work. Isn’t useable anymore.
Chris stocks
2024-12-13 16:14:24
The product was out of balance and unusable!!
Recommended Products