Your cart is empty.
Your cart is empty.Product Description
ZHSYMX 304147 EZ EFI Cable Mount Kit for Automatic Transmission TV cables for GM 700R4 transfer Carburetor Throttle Cable Mount Bracket
The EZ EFI Car Cable Mounting Kit is a comprehensive kit that includes all the necessary components for mounting and adjusting automatic transmission TV cables and GM 700R4 transmissions throttle brackets. It provides a complete solution for cable mounting and adjustment, ensuring proper functionality.
Mike
2025-08-18 16:20:46
Needed two washers to make it fit. $100 cheaper than same part from holley. No brainer.
steven monroe Sr.
2025-04-07 10:33:55
Throttle cable and pressure cable mounted up and adjusted perfect with this system would buy more if needed
Turtle beach
2025-03-31 12:21:26
Had to do some "fitting" the bracket was too tight the linkage on the ASV2 carb. Also if you have a trans kickdown; bend the adapter 90 degrees and the round hole will act as your return spring mount.
Big-Foot
2025-03-13 17:38:39
Steel throttle & transmission bracket system..While the system and components are well made and powder coated satin black, the main bracket and all parts are made of steel. I like that the kit has just about every type of cable anchor that you could possibly need.I am knocking off one star for the fact that all parts are steel rather than the aluminum advertised. Also there are no instructions. So if you have not installed systems like this in the past, you may have some difficulty during installation and adjustment procedures. I work on a lot of cars and trucks, so this cable mount will come in handy for most GM transmission equipped cars with single 4bbl intake manifold.Bracket is 3mm - 1/8†thickI keep up with my reviews and will revisit this one should the need arise.I give this Cable Mount my Big-Foot “Stomp†of approval and 4 stars!
Robert
2025-02-15 16:06:06
This is the best solution I have found after trying several. I bought one for all three cars!
Oakley
2025-01-28 14:51:01
ZHSYMX 304147 EZ EFI Cable Mount Kit for Automatic Transmission TV cables for GM 700R4 transfer Carburetor Throttle Cable Mount BracketA kit designed for adding or replacing a worn OEM #304147 700R4 auto-transfer TV cable bracket. Mounts onto a carburetor manifold’s studs with a carburetor or an aftermarket carburetor style EFI system. I tested it on a square body manifold. But I would assume it would also work on a spreadbore manifold without any interference to the throttle body or linkage. Made from aluminum with a black painted coating.Identical to the higher priced units sold by multiple resellers. But there are no directions included in this kit. So, if you are not familiar with this install. I would recommend leveraging the directions from one of those higher priced resellers for its install.
Recommended Products
$41.95
$ 17 .99 $17.99