Shopping Cart

Your cart is empty.

Your cart is empty.

3/8'(10mm)ID Fire Sleeve Heat Sleeve Heat Shielded Fire Thermo Armor Silicone Coated Fiberglass for Automotive Hose Lines & Electrical Wiring,5 feet(Red)

Free shipping on orders over $29.99

$16.99

$ 7 .99 $7.99

In Stock

About this item

  • 【 Application】——Fire Sleeve Designed of silicone rubber coated fiberglass. Heat Sleeve Quality material to protect good heat insulation for hose wires fuel lines. Widely used to protect and bundling fuel lines, hydraulic and oil lines from high temperatures and to prolong the life of wiring and hoses.
  • 【Withstand High Temp】——Fire Sleeve Heat Sleeve Can withstand 500~2000 degree intermittent heat.
  • 【Dimension】—— Fire Sleeve Inner Diameter 3/8“ (10mm) , Length 5 Feet (1.5 m). Heat Sleeve Note: the size is measured by manual ,there may not be very exactly.
  • 【Easy to Use】—— Fire Sleeve Easy to instal,Ideal for protecting hoses, electrical wiring, oil and fuel lines from heat and to prolong the life , helps to prevent vapor lock, protects wires from melting.
  • 【Lifetime Service】——You will enjoy 12 months service if you order Heat Sleeve this silicone coated fiberglass heat Shielded from our store. Fire Sleeve Any problem please feel free to contact us!



Product Description

红硅胶管1

Ummickl Fire Sleeve Heat Sleeve Wire Heat Shield

红管33

Reasons for choosing Ummickl high temperature fireproof insulating sleeve for cables, pipes and wiring harnesses on your equipment(Red 3/8" I.D. x 5FT)

  • High temperature fire rated insulated hose reduces radiant heat by up to 80% and Withstands 1200 degrees F continuous heat and 2200 degrees F intermittent heat.
  • Provides burn protection during under-hood repairs and maintenance.
  • Perfect for protective equipment cables, pipes, harnesses and more!
红管321

Ummickl Fire retardant silicone sleeve(Red 3/8" I.D. x 5FT)

  • Inner layer: woven with alkali-free glass fiber;Outer layer: Coated with silicone;
  • Silicone Thickness: 1mm / 0.04" ;Fiberglass Thickness: 5mm / 0.2";Flammability: VW-1;
  • Features:
  • The organic silicon structure on the surface of the casing contains both "organic group" and "inorganic structure". This special composition and molecular structure make it integrate the characteristics of organic matter and the function of inorganic matter.
  • Silicone layer can be cleaned and protects against abrasion, Burn protection during under hood repairs and maintenance, Helps to prevent vapor lock, protects wires from melting.
红管456

Ummickl Fire retardant insulating sleeve(Red 3/8" I.D. x 5FT)

  • 1.Smooth surface, tear resistance and not easy to wrinkle and break;
  • 2.Sleeve type, good sealing;
  • 3.Good flexibility, shock resistance and wear resistance;
  • 4.Fire insulation, electricity resistance and high temperature resistance;
  • Used to protect fuel lines, hydraulic and oil lines from heat and to prolong the life of wiring and hoses in case of fire so that critical systems can function longer in the aviation and marine fields
RED0902

Ummickl Fire retardant silicone sleeve(Red 3/8" I.D. x 5FT)

  • Excellent high temperature resistance; Anti-splash, multiple protection, heat insulation, energy saving, anti-radiation; Anti-moisture, anti-oil, anti- aging, anti-pollution, prolong equipment life; Ozone resistance, voltage resistance, arc resistance, corona resistance, resistance It has a wide range of effects, such as reducing the incidence and spread of fires;Insulates wiring, hoses, oil / brake / transmission lines, and more,Provides burn protection during under-hood repairs and maintenance.
RED0903

Ummickl The high-temperature fireproof casing(Red 3/8" I.D. x 5FT)

  • The high-temperature fireproof casing is made of alkali-free and high-temperature resistant glass fiber, and is covered with thick iron oxide silica gel. Features make it suitable for protecting hoses, cables and lines in harsh environments.
  • Use for bundling and protecting hoses, electrical wiring, etc. from high temperatures
  • Insulates wiring, hoses, oil / brake / transmission lines, and more,Provides burn protection during under-hood repairs and maintenance
RED12

Ummickl High temperature fireproof casing(Red 3/8" I.D. x 5FT)

  • Application: The products are widely used in the insulation protection of cables in high temperature places such as steel mills, smelters, glass factories, etc., especially in the case of instantaneous splash of molten steel, the super-thick protective layer of the sleeve can play a good role in protecting the cables in the tube. It is also widely used in cables, fluid pipes,Mill cables, oil pipes, saw edge cables, generator sets, voltage equipment, large buildings, hydraulic systems, automotive wiring harnesses, and more!

Eddie P.
2025-08-24 15:44:51
Well made and seems to be working well against the heat issue. Nice color and easy to install.
Kim Coleman
2025-07-24 11:03:30
Quality product, easy to install. Smokes on first exposure to heat, as expected
bogus
2025-05-28 10:51:56
Installed on my 79 F150 fuel lines from fuel pump to regulator, and regulator to carb due to vapor lock. It did help, but not completely. This ethanol gas boils at lower temps, so I will be adding a return line. Overall, very impressed with the quality and workability of this. Cuts with scissors and installs easily. No gaps as with other types, and I used metal wire ties at the ends. Looks good and performs good.
Benson Wong
2025-05-19 14:39:05
Using this to cover my fuel line on my Datsun and seems to be working or helping keep the line cool to prevent vapor lock
Terry59
2025-04-24 11:11:16
I've always had bad vapor lock on my '64 Mercury Comet Caliente and decided not to put up with it any longer. Concluding it was from gas vaporizing in the steel fuel line on top of my engine when it gets hot, I bought this Ummickl Fire Sleeve to slip on it. My fuel line is 5/16" I.D., so I bought the 1/2" diameter sleeve. The one I bought was plenty long enough for my purposes. Seeing that the new sleeve stretches a little, I removed my fuel line and cut the insulating sleeve a little longer than necessary, knowing I could always cut a little more off (it's easy to cut). I slipped it over one fuel line attaching nut and slid it down to the other. In my situation I needed nothing to hold it in place as one long section of tube covered the entire line and I put the fuel line back on the engine.I drove it around on a hot day and noticed right away it idles well now while waiting at stoplights. I bought fast-food and parked it with the engine off for 10-15 minutes...ideal conditions for vapor lock. Before, I'd have to hold the gas pedal to the floor while restarting it. Now, it restarts right away with my foot off the pedal. I did the same thing at the gas station...and it started right away.This stuff works great! It's simple to put on if you have easy access to removing your fuel line. And as I said, it's easy to cut-to-length.I highly recommend this!
Michael Sicard
2025-04-21 20:33:50
My "toy" is a 1984 Toyota LandCruiser. I had the engine compartment opened up to replace all of the coolant hoses and decided to also replace the 40 year old fuel pump. The original heat shielding had become very hard over the years. I ordered a length of this and have insulated all of the fuel lines (tank supply, tank return, carb supply) in the engine compartment.
Thomas C.
2025-03-15 13:58:40
Should do the job
Dan
2025-01-30 18:26:36
Good heat shield that works great. Keeps my fuel line cooler so my fuel doesn't turn to vapor.
Recommended Products

$22.95

$ 11 .99 $11.99

4.6
Select Option