Your cart is empty.
Your cart is empty.3M Accuspray Atomizing Head Refill Nozzles for PPS 2.0 are designed for the 3M Accuspray paint gun and PPS 2.0 Spray Cup System. Replacement nozzles come in a range of sizes so you can spray numerous applications with one gun. The orange 1.4 mm size is ideal for sealers, basecoats and topcoats. Refill nozzles can be used 5 to 10 times, then removed and replaced, giving you the performance of a new gun on demand and at a fraction of the cost. 3M Accuspray Spray Gun System with PPS 2.0 is a convenient all-in-one solution for measuring, mixing, filtering and spraying paint materials. Unlike with conventional aluminum or other metal paint cup systems, with PPS you don’t have to mix paint in extra cups and filter it into a paint reservoir, so you waste less paint. And with a fresh lid and liner for each mix, there’s less risk of outside contamination. You can also increase productivity in prep and cleanup time by as much as 50% and use up to 70% less cleaning solvent over conventional paint cup systems. PPS 2.0 features improvements like a quarter-turn locking collar with each lid, domed lid design for better spray performance and wider lid fluid spout. Each paint cup has convenient printed-on universal mix ratios for accurate mixing and a clear access window for easy visibility.
Jonas Buteaux
2025-07-15 15:53:51
Good product. Loves these tips
Steve W
2025-07-04 10:43:53
Overall exactly as expected. Simple to use and very consistent on the spray pattern. I have sprayed many vehicles and this is by far the most consistent on easiest to use.
raymond bray
2025-07-03 19:03:47
work very good
Josue
2025-06-11 15:54:33
muy buen producto exactamente a lo publicado, llega en un tiempo muy apropiado
charles l.
2025-05-20 13:04:48
I bought this gun because of the unique ability to choose the correct tips for the different paint products that I use. I used it to sprayed hi-build primer with the 1.8 tip and urethane base coats with the 1.4 tip. This car has a 3 tone paint design and the pps system is so easy to change colors with and easy to clean up that I would use this pps system in all my spray guns. Definitely the right spray gun for most automotive paint jobs. The spray pattern is easily adjustable for small jobs also. The 20 lb working pressure is a little deceiving because it does take a lot of volume of compressed air to operate properly. The average 2 or 3 hp compressor will have a hard time keeping up with this gun when painting a large panel or a whole car. My 11 cfm at 90 psi compressor did the job with ease though.
DK
2025-04-29 14:35:05
Quality product quick shipping
KC
2025-03-17 10:05:58
Makes aPpoor Painter Look Great. So easy to clean, amazing.
Average Consumer
2025-03-15 11:03:42
The description says these nozzles fit a PPS 2.0 Paint Gun, which I own. However, there are apparently different styles of PPS 2.0 Paint Guns, because the nozzles for my gun look different, and these nozzles will not fit my gun (they are too long to be inserted into the gun body).After researching this problem, I believe my PPS 2.0 Paint Gun needs the nozzles that have "Gravity HVLP" in the description. Also, these "Gravity HVLP" nozzles are difficult to find. I had to buy a variety pack to get one 1.4mm nozzle that I need.The product should state much more clearly the difference between the PPS 2.0 Paint Gun Systems, and indicate more clearly which System they fit.
Tab
2025-02-22 12:59:45
Excellent easy clean
Alex Dugré
2025-02-20 12:42:12
Easy cleaning every time.Low downtime on jobs specially combined with the 3m cup system.Usually used a Devilbiss gti-3 excellent gun but longer to maintain and less expensive to rebuild the 3m.
Customer
2025-01-31 20:45:05
work well
Clem H.
2024-12-29 11:44:38
Works good for primer, base, and clear.
Recommended Products
