Your cart is empty.
Your cart is empty.
This item is used for third brake light. With the convenience of an easy peel off adhesive backing , the material can be put in place, then moved for slight adjustments, stays in place for installation. It's a pretty good choice to replace the old and dull part as an ideal solution for the water leak problem. Check Compatibility table before ordering.
Package includes:
1 gasket with 1 manual
Compatibility:
2009 to 2014 Ford F150
Specifics and Features:
Foam seal , Enough thick foam can provide excellent waterproof performance.
Made of high quality material,can be used for long time normally
Easy to install, perfect cutting edge makes the installation become simpler
Warranty and Customer Service:
1. 90 Day manufacturer warranty since order purchase date.
2. Feel free to send email first if there's any issue before or after purchase. All emails will be replied within 24 hours. Your case will be taken seriously regardless of warranty period.
Mike in PA
September 6, 2025
My generation of F-150 is apparently prone to developing leaks around the 3rd brake light. The water then finds its way into the cab and creates a mess. This foam seal is supposed to be thicker than OEM, but it's hard to tell, as 11 years have passed and the OEM foam has compressed and dried over that time.The lens cover is quite simple to remove, as there are only 2 screws holding it on. The three lights are a simple twist and remove. I cleaned the area on the cab where the old foam met the metal. I cleaned the residue that found its way under behind the plastic cover using a small bristle brush. Standard house cleaner or detergent work, just don't use much. I had some water get trapped in there, but not much, and by studying paper towel down each light hole, i was able to dry it out. If your patient a day in the sun would work.The foam itself is cut well and very easy to install. It falls right into place on the lens, and the adhesive is quite strong. I had no issues during installation and or after a hard rain. I can't speak for its longevity, but this is really good product.
J Popee
September 2, 2025
Worked great to stop the leak on my 2014 F-150
William s.
August 26, 2025
Has a stick side and easy to apply, seals up cab to keep it dry, fits nicely and sealed up and will last years to come, A must if you have a 3ed break light.
Troy M. Miceli
July 26, 2025
Perfect fit for my 97 F-150, easy to install
James Dismore
June 21, 2025
Works as intended seals as should.
Dianea
May 28, 2025
Perfect replacement for my cracked one.
A Gutierrez
April 23, 2025
This was perfect thickness to put on 3rd brake light.
Customer
March 30, 2025
Gasket working great stopped leak thanks
Danny Gagnon
March 25, 2025
Merci
JayBo
March 15, 2025
Easy to install and fit perfectly. It’s quite obvious it’s thicker when comparing it to the stock gaskets that leaks, but it’s a bit pricy for what it is.The foam seems quite dense/thick, sure hope this fixes the water leak issue I’m having. If it does it’s a great purchase!
Jason D. Kopala
February 12, 2025
Replaced leaking stock gasket.. easy to install.. little thicker which i hope keeps the gasket in place unlike factory gasket.
Glen Swarbrick
January 14, 2025
Solved my water leak problem
zerowingw
January 4, 2025
It fit my 2015 F150 accept there a little hard to take off the white paper labelso it need to careful for the take off the white label and it need a special care of that
Recommended Products
