Your cart is empty.
Your cart is empty.Product Description
Maybe you just need a reason to buy the banana plug - The speaker is located against the wall, with only a small space.
24K Gold Plated Copper + ABS Shell + Color Coded.
Very Strong Banana Plug, Double Screw Design, No Welding,Accepts 10AWG to 20AWG Speaker Wire.
Wide Range of Applications, A/V receivers, amplifiers, surround sound systems, banana wall plates，perfect for connecting the satellite and center channel speakers，it's amazing clarity of sound when listening to music, watching television or movies, or playing video games.
nocknock@pacbell.net
2025-08-21 10:41:08
Well made, work well, just what I needed.
Tony E.
2025-08-08 11:43:15
If you have the room to do a 90 degree turn off your amp's five way binding posts, these banana connector will save you at least 1 1/2 inches of back room. You can easily fit 14 gauge wires.The dual nuts make for a very sturdy connection and likely better conduction. The overall design also eliminates the possibility of shorts -something that can be an issue with 99% of all audio amplifiers.The banana proper is not solid, instead it's made from a number of "fingers" that compress inwards as you push into the connection... so it makes a good solid connection and will not slip out on its own or when you pull on the cable while dressing its path. Now then, It is not too tight either, so it's easy enough to push and pull when you need it.I actually like the way the plastic sleeve fits over the connector and how the connection is made that I would like to get these in a straight connector as well.A very nice design, and I've been playing with speaker cables since, oh, the early 70s...
propflux01
2025-08-02 17:47:33
No issues putting these on. I deducted one star for the set screws not being Allen type, but rather standard (even Phillips would have been better). I used them on 16 ga wire, I stripped off about an inch, twisted it, folded it over, and screwed it down. The prongs went in the speaker terminals without issue, not too loose, not too tight. Covering fit good and tight, although is not heat shrink. Would buy again.
DukeFan
2025-07-14 18:20:27
I like these right angle banana plugs because they are easy to install (two set screws in the barrel make for a sure connection to any piece of wire you can stick into them), they fight tight into the 5-way binding post (very tight), and are very sturdy. The fact that the plastic sleeves fit over the set screws assures the screws will never back out on their own.The plugs come packaged in two plastic bags inside of a very utilitarian box (adorned with a nice little logo) along with a couple extra set screws in case you lose one.Highly recommended.
Mike Shortle
2025-07-11 11:59:47
These worked great on my amp so the wires didn't have to be straight out the back. I would purchase them again.
Kuda
2025-07-03 15:24:04
Great banana plugs. They come it extra set screws which is a huge plus. Each plug has two set screws on opposing sides. They come out in about fifteen twists. Ten twists is open enough for 12 Guage wire. They have worked in every component and speaker I have tried them in. Gonna be tough to beat the value. These are 90 degree. I went back and forth. They work great for my needs but it may get tight behind a large surround receiver, so I'd suggest ones which are straight out. Same brand if you can find them, these are great. Better than ones I have had in the past.
Charles W.
2025-06-21 09:03:47
Often the backs of your speaker or amp are close to the wall and the right angle banana plug avoids taking up more space than necessary behind the speaker or amp. These seem to be made of gold plated brass with two brass set screws in each plug to firmly hold the wire end.They come with insulating sleeves that push up over the part that gets the wire to avoid the possibility of shorting out the signals. The insulating sleeves like the picture shows come red and black to indicate the polarity. The insulating sleeve appear to be a somewhat stretchy PVC sleeve. If you use large wire, especially if you tin the ends with solder, the set screw heads stick up a bit and it’s not that easy to slide the insulating sleeves up. On the other hand they are not liable to slip off. If you cannot get the sleeves over the screw heads you might need to use appropriately colored tape or shrink tubing. I used 14 gage speaker wire that I tinned the ends with solder and with some difficulty I was able to slide the insulating sleeves up onto the end.These bananas are made to fit pretty tightly into the typical binding post end. That ensures a good connection but you do have to push with some force to insert them.Mercifully the set screws are already screwed into the fitting, you just have to unscrew them enough to insert your wire. I bought some straight bananas that came with all the set screws in a little bag. What a pain that was with several speaker connections and fat fingers. But these do not have that issue.The quality seems excellent for these right angle bananas and they are made to accommodate larger wires And make a very good connection to the typical binding post center hole.
Rodger C.
2025-06-03 12:00:20
Life made easier...
Miky
2025-04-27 10:27:22
Besser als erwartet !!!Habe mein System auf 9.4.8 ( Denon A1H) umgestellt und brauchte Winkelbananas, habe vorher welche von Poop benutzt ( Totaler Schrott im Vergleich ).Dachte Hohl Bananas Stecker sind ausreichend ( habe noch Ohlenbach B69 und eine spätere steige komplett aus Vergoldeten Material und Sechskant M4 Maden, so was tolles gibt es nicht mehr :-( ), aber als ich den ersten von denen hier angebracht habe, war ich erstaunt über den Halt ( habe mich für die aufgrund von diversen Fotos im High End Bereich entschieden auch aus zu probieren ) und das man die Schrauben nicht komplett reindrehen muß, wegen dem gumi Schlauch ( kein Alu Hohl aufdrehe Aufsatz).Der Stecker selber ist so fest bei reinstecken, dass ich Lautsprecher und Verstärker ein wenig verschoben habe ( die von Poop, sind quasi selber ausgerutscht).Ich nutze unter anderem Dynavox Perfekt Sound Kabel für die Surround Lautsprecher, Kimber Cable 4VS ähnlichen, 2x4 Adern zu je 0,75mm pro Kabel für Front und sogar mit der dicke habe ich keine Probleme, Sitz perfekt am Kabel und Bombenfest in den Bananas Eingängen.Nutze Nuvero set für die Aufstellung mit Endstufe.Kanne es jedem empfehlen, der plat technisch bis zu 4 cm Platz sparen will und auf Qualität wert legt.Und bei mir haben die 4 cm im Vergleich zu herkömmlichen Hohl Bananas sehr viel gebracht , gerade beim AV Receiver & Endstufe, konnte sie näher an die Wand bringen.Nachtrag: 2 Tage später, heute wieder das 2te Päckchen mit 24 stk erhalten und genau so zufrieden wieder bei der ersten Bestellung
Rajesh Kannan
2025-03-22 10:14:34
Good and satisfied, but price feel a bit expensive
CNOW
2025-02-27 17:59:56
Ces fiches banane sont de très bonne qualité, je les ai montées sur du "Real Câble" de section de 3mm pour Haut-Parleurs Très Haute-Fidélité. J'ai sélectionné ces fiches coudées à 90° gainées de plastique moulant pour la connectique de mes Enceintes Triangle afin qu'elles ne risquent pas de générer un court-circuit si toutefois elles venaient à se toucher au dos des enceintes. De plus leur angle de 90° permet au câble en cuivre particulièrement lourd de les libérer des forces supplémentaires qui pourraient occasionner une cassure de la fiche si celle-ci était droite et non pas coudée. (Voir Photo)N'hésitez pas avant de les monter sur les câbles à insérer préalablement chaque fiche une première fois dans un bornier type qui va accueillir la fiche ultérieurement une fois reliée au câble pour la préformer (roder) afin de faciliter son insertion ultérieure, car les fiches neuves sont assez difficiles à insérer la première fois et il y a un risque de les abimer si l'on force trop ou surtout de travers, ensuite la 2ème fois et les suivantes ça va tout seul. Vous comprendrez-mieux lorsque vous aurez procédé.Attention également de bien les aligner lorsque vous les vissez sur le câble afin qu'elles soient parfaitement positionnées en face des borniers et éviter de tortionner le câble si vous les avez vissées comme des fiches droites sans vous soucier de leur orientation.J'espère que ce commentaire vous sera bien utile et vous évitera des erreurs inutiles !
Krysyo
2025-02-26 16:48:44
Sono stato contentissimo del fatto che hanno aggiunto 2 viti di scorta che guarda caso una l'ho persa, quindi utilissime
Hörbart
2025-01-21 15:13:54
Gutes Produkt, kann ich soweit Empfehlen.Auf Hohem Niveau, aus meiner siecht würde es ein kleines Detail zu verbessern geben. Die Madenschrauben zur> >Befestigung der Kabellitzen von Schlitz auf Kreuzschlitz oder Innensechskant zu verändern. Keine Kritik nur eine Anregung.Werde ich nachbestellen. zu Empfehlen
Recommended Products
$67.99
$ 28 .99 $28.99