Your cart is empty.
Your cart is empty.Product Description
The bucket dolly is a efficient and easy way to take your wash bucket on the move. Save your energy by rolling your bucket around instead of lifting it around as you wash and clean. This is a must-have accessory for every car detailing enthusiast
The bucket dolly simplifies car washing by allowing you to easily move water-filled buckets around your vehicle, eliminating the need to carry heavy buckets from one side of the car to the other
Traps dirt at the bottom of the wash bucket to keep your car cleaner when you wash it
You can create a two-bucket system with a link between two bucket trolleys
The bucket truck is equipped with a locking screw. By tightening it, you can prevent the bucket from wobbling
Algesoft
March 16, 2025
This is one of those things that, when you see it, makes you wonder, “Why did I not think of this before?â€. Truism: It is easier to push a full bucket than to lift it.This is a sturdy dolly that fits perfectly a 4.5-gallon bucket, or any bucket up to 10.8 inches in diameter. The dolly comes with three thumb screws that you can be used to compensate for a smaller diameter bucket. It also has a wheel lock to prevent the dolly from becoming too anxious if your driveway is on a slight slope.There were some comments about the wheel casters being difficult to fit. You’ll have no problems if you put a bit of silicone grease, or any type of grease for that matter, on the shaft of the wheel caster. In a sense, it is better to have a tight fit because you don’t want wheels that slip out easily.The backet also comes with a scraper for your wash glove; it is very effective.Time to have fun.
The Connoissumer
March 3, 2025
I don't have as much time to maintain my cars as I used to, but I love to execute Chris Fix's "SuperClean" process when I can. Quality tools make all the difference.This thing is awesome! A literal "where has this been all my life" experience. A 5-gallon bucket is heavy and back-breaking if you're not careful. I will likely pay for a second dolly as I use two buckets like Chris suggests. One for wash and one for rinse.The grit guards really do work. You'll never go back after you dump your first rinse bucket and see all the grit in the bottom. You don't want that junk on your paint.Another reviewer complained about assembly. Mine went together with no issues whatsoever.Value is high as it includes the grit guard. Highly recommended.
Terry Dennis Jr
November 17, 2024
The wheels do not fit in the holes , we had to beet them in with a rubber mallet and one of the casting broke. You shouldn’t have to beet a shaft in a hole that was clearly meant to be a press fit.
Recommended Products