Shopping Cart

Your cart is empty.

Your cart is empty.

5.5mm Fuel Line 1/5 Inch Gas Tube Fuel Hose 5 Feet for ATV Quad Pit Dirt Bike Go Kart Moped Pocket Bike Motorcycle Parts with 10pcs Clamps

Free shipping on orders over $29.99

$9.99

$ 4 .99 $4.99

In Stock

About this item

  • Fuel line inside diameter 5.5mm,Fuel line outer diameter 10mm
  • 5.5mm Fuel Line Hose For Hon-da Black Motorcycle Fuel Line - 95001-55008-60M
  • 1/5 inch 5.5mm Fuel Line Suitable for: lawn mowers, tractors, harvesters, snow blowers, golf carts, motorcycles, yachts and other small engines;The Black Gas Fuel Hose ID & OD is 5.5mm*10mm
  • 5.5 mm Fuel Hose material: NBR+PVC/CSM, corrosion-resistant rubber inner layer, anti-aging rubber outer layer, double layer rubber; Fuel Line Hose temperature range: -104°F to 212°F (-40°C to 100°C),Low pressure hose, compatible with gasoline with ethanol content of 10% or more
  • Package include: 5 feet fuel line, 10 clamps


AloneGoer 5.5mm Fuel Line 1/5 Inch Gas Tube Fuel Hose 5 Feet for ATV Quad Pit Dirt Bike Go Kart Moped Pocket Bike Motorcycle with 10pcs Clamps
Fuel line inside diameter 5.5mm,Fuel line outer diameter 10mm
1/5 inch 5.5mm Fuel Line Suitable for: lawn mowers, tractors, harvesters, snow blowers, golf carts, motorcycles, yachts and other small engines;The Black Gas Fuel Hose ID & OD is 5.5mm*10mm
Package include: 5 feet fuel line, 10 clamps


amborg
2025-09-02 10:14:00
I’m retrofitting cruise control on my early 1980’s Audi 4000 using factory parts. It operates the throttle valve via a vacuum pump and a vacuum actuator, controlled by an electronic control unit. The system specifies a 5mm ID & 10mm OD hose as the vacuum line between the vacuum pump, the vacuum actuator, and the brake & clutch pedal vent valves. The Audi factory hose for this purpose is pricey & now hard to find, and the 3/16” ID & 7/32” ID hoses I tried from the local auto parts stores were too tight, and the 1/4” ID hose was too loose. The 5.5mm ID of this Alonegoer fuel hose turned out to be an ideal fit, it sealed very well on the pump, actuator & pedal valve vacuum ports, as well as the T-pieces in the line. It’s flexible enough to route around easily, yet stiff enough not to collapse under vacuum. Since it’s intended to be a fuel hose, i expect it to be even more durable as a vacuum hose. Last but not least, it’s much easier, cheaper & quicker to get than the factory hose. I’m happy with how it worked out!
Bouf shea
2025-08-20 18:35:01
Just like the stuff that come factory on Japanese bikes… it will harden over time but it takes a while.
Customer
2025-08-09 10:10:02
Plenty of clamps, perfect fit.
Richard Di Cato
2025-07-02 19:26:35
Parts for your classic machines are challenging to get right. To buy something that fits and works perfectly , is rare. So I’m here to announce that the fuel line fit perfect. This was a instillation on my 1970 Honda ct 70cc
Ma Thenen
2025-05-26 11:36:01
Has same dual compound as original Yamaha fuel hose, feels the same too, we’ll see if it lasts 20 years like the original 🤷🏻‍♂️
Thomas Piper
2025-04-24 18:27:42
Just what I needed after the winter mice acquired a taste for rubber gas tubes.
Bill Meinke
2024-12-30 20:45:24
Quality was good but did not fit a KTM bike.
vw7420
2024-12-20 14:13:55
Good quality fuel line and there is plenty for my other bikes.
Recommended Products