Your cart is empty.
Your cart is empty.Product Description
Compatible with Multiple Surfaces.
For outdoor and indoor applications on different types of surfaces:
- Concrete
- Wood
- Marble
- Ceramic
- Vinyl
- Metal
- Laminate
Simple 3 Step Installation.
Step 1: Clean the surface.
IMPORTANT: Do not apply the non-slip tape below temperatures of 50°F (10°C) or during the winter months. Make sure that it doesn’t rain 24 hours after installing the tape.
Step 2: Remove the paper liner.
Peel back the paper liner of the non-slip tape revealing the adhesive side of the tape.
Step 3: Apply the non-slip tape.
Apply the tape from one end to the other. Press on the tape once it is completely applied to make sure that is firmly installed.
Richard J
September 2, 2025
I needed to reduce the risk of slipping for my dog on the top step going into my garage, It was easy to apply and did the trick. I only needed one but it comes in a pack of 10. I may add more to the 3 other steps but he seems ok once he gets going. Good product and it seems to be sticking well with no peeling on the corners. I would get this again or recommend it to others.I noticed others had low ratings. Mine is not used in the elements/weather. So far so good, it's been about 2 months and no sign of degradation.
Patricia L.
August 27, 2025
Easy application. Non slip
Christina Noble
July 24, 2025
It has held up for about a year now. It was easy to use. It has helped my dog stop sliding down the stairs. The size was perfect.
Tony R
June 30, 2025
Used this on a couple of high traffic areas on a boat. Super easy to install and very good adhesion. Looks good.Only negative is that the base materials is a little soft and can tear with hard use. Don't put it right at an edge or corner to prevent it tearing a bit. Not upset and I'll buy more in the future, just need to control my aspirations of where and how to use it.
GG
June 17, 2025
Product is as advertised. Very easy to install and keeps us from sliding on our very slippery back porch. Thank you
CMYK Josh
May 27, 2025
I installed these on a painted trailer ramp that was way too slippery and I couldn't be happier with the result. I started with a freshly painted (and cured) plywood ramp. While there's a good amount of extremely sticky adhesive on the back, I can't imagine that you'd have good luck getting these, or anything, to adhere to extremely weathered concrete or wood. If possible, level and paint before application to weathered surfaces. That being said, here's how I installed them:1. Measured and squared the strips to the ramp, using masking tape to hold the strips in place before removing backing. After the first strip, I used a J Roller to get the masking tape to stick to the sandpaper side. Tape does not want to stick to sandpaper without some persuasion.2. Flip the strip back, using the masking tape as a hinge, so that the backing paper is now facing up. My wife removed the backing paper because fingernails are a requirement here as there's no score mark on the backing.3. Carefully flip the strip back onto the ramp, adhesive side down, using the tips of my fingers to lightly set the adhesive from the taped edge to the free edge. This avoids creating bubbles.4. Set the strips with my weight on a J Roller. This is 80 grit sandpaper. You don't want to use your fingers to set the adhesive unless you don't mind leaving your fingertips on the strips.Once the backing paper is off, the strips are much more supple than I would have imagined. I work with sandpaper and emery cloth all the time and these are not as stiff as those. The adhesive reminds me of flypaper. It's seriously sticky stuff. It's a generous layer but not enough to fill gaps. Get your placement right the first time because once these things are down, they're not coming off without a fight.Start to finish on 8 strips was about 20 minutes. I spent more time planning and taping than actually setting the strips. I feel better about walking on the ramp now so this was a worthwhile and inexpensive fix to a potentially dangerous problem.
Alice Miller
April 24, 2025
Why do the manufacturers have to skip on a slightly larger peal back? It was so difficult removing the paper! I came very close to returning the entire product. While it may work, it was pretty darn annoying!
Renato Barbosa Lima
April 21, 2025
Easy to install and matches in any color
linda m stachula
April 18, 2025
we used this product on the foot rsts of moms transport chair so her feet won't slip offalso used it on the stairs of our back deck going to the pool
Mary
February 28, 2025
Aderiscono perfettamente, Facile applicazione. Prezzo competitivo rispetto ad altre marche. Consigliatissimo
JohnA
January 10, 2025
Very easy to install, looks great, provides grip on stairs. Using on deck stairs around hot tub and pool. Bought a second box so have them on all the stairs on the deck.
Rayjer9
December 28, 2024
step edges
empfelentswert
December 14, 2024
Artikel gefällt mir gut-Haftung ist im Moment sehr gut -bin gespannt nach dem Winter-dann kann ich eine noch bessere Bewertung abgeben.
Recommended Products