Grabbed this for my oldman who hates messing w/ carbs on small engines. Had a couple smaller 6hp TECUMSEH snowblowers. Put this on a cpl and says they run great. hasnt complained yet.Bolted this on a blower that was sitting for 3 years, as well as another someone was throwing out. And had'm all fired up after fresh gas and spark plugs.90% of the time, the floats are stuck open or closed on these small engine carbs, either flooding them out, or not giving them enuff fuel too stay running.. And is a simple fix by taking apart and cleaning the float needle/jets/ etc. or getting a new kit.But theres nothing like a complete new carb.I was gonna take the bowl off and check the float. But i figured if bolt i on and try it. and on both types of blower, both started and Just gonna run it till it acts up. got a cpl tanks threw both and so far so good.But for the price, cant beat a whole carb that bolts on and runs. Me and my oldman like too always have extra parts around for small engines. and this is a good temp' carb too keep it running while take time and rebuild and clean the OEM carb. And leave it on the shelf for next time i need it.. Or you could mix and match parts. But I wouldnt advise that with these clones. Only thing I noticed, is the smaller carbs in these kits, dont have as many adjustments as some older oem carbs, or like the larger carbs for 8-10hp.... Prob a good thing in a way..As theres nothing for the kids or nuBB'e too turn and mess up.. Except for idle adjustment..No way too tune or tweak the fuel mixture threw-out the rpm range but didnt have too anyway..Its a snowblower, not a race car, or streetbike. Besides, it didnt matter. it started easy and ran at all settings, and kept running all day. next day it stared up did the same.. We Tried these on 2x diff small engine TECUMSEH blowers,1 mtd an 1 murray or something.. Also 1 larger 10hp ARIENS,( I got another cheap clone carb for from another listing) thou; there all swappable. You can put this smaller 4-6hp carb on a 10 and vice-vers. thou some will run warm, less power, usually better at low and mid rpm. But usually better than worse depending on adjustment..There yard tools. Not flat tack quarter midget racers..This kit seems too be set perfect for 4-6hp older TECUMSEHs. ALL 3X i put these clone kits on, start and stay running. Really all that matters for a yard tool.Even came with all the extra bits'- fuel line, shut off valve, primer, and filter, choke knob... Didnt need, but the primer, on/off valve and filter etc. Is nice too have. And if its a older machine worth changing too help eliminate any problems. I used the filters, primer and line on one. Only carb on other.If you can change oil you can prob' change this. and save tons of money vs. taking it too a shop. I dont know how many times ive saved blowers and other small engines from the scrap all from a simple good soak and blow' carb clean, tan clean, and new spark plug helps..If you got spark, but hard start, wont stay running, wont rev, etc etc. Id just grab a kit like this and try it before you give in. The fuel line is OK. could be a bitt longer, but long enuff too get it running atleast. And help elimnate one more little problem that'll keep these engines from running/starting easy.-Along with cleaning out the fuel tank. checking for spark. thats about all there is for the small engines.. Unless something major is wrong. but usually not..Real good kit over-all especially for the price. I dont know if i would install these as a service dealer, but then again Maybe. With no mixture screws, kinda makes them fool proof.. I wouldnt be afraid too keep a few of these around too have too atleast get a engine running.

Fits perfect on my snowblower, fired right up on first pull once it was installed. No leaks, seems decent!

Easy to install started right up didn't have to adjust anything the quality of the hose are good for the price the hose clamps could be better but work can't beat it for the price my last one i bought a few years ago for my other engine is still working fine no issues...

Seller: HOOAIProduct: 640084B Carburetor for Tecumseh 5HP MTD 632107A 632107 640084 640084A TORO 521 Snow Blower HSSK40 HSSK50 HS50 LH195SA - Tecumseh 632107 640084 640105 640299 632107A 640084A 4 & 5 HP Engines CarburetorProblem: The snowblower would only run with a fully open carb and would die on any load.Price: $16.99I have an MTD YardMachine Snowblower, model 317-611D18. It has a Tecumseh engine, model HSSK50-67364R. It's a 20 year old snowblower and the carb was starting to struggle. Eventually I had to open the carb all the way up and I couldn't keep it running under auger and snow load. I took apart the OEM carb, cleaned and and still had trouble when I reinstalled. I purchased this product in Feb 2018 to replace the carb. I performed the repair in Summer/Fall 2018 and things went very smoothly. Everything was working fine.We had a very mild winter in terms of snow for MN standards and the first time I had to use the snowblower was a couple of weeks ago. I probably would have bet my life savings that it wouldn't start for some reason and sure enough, it didn't. I suspected the carb again, as I was getting no fuel. Primer was getting suction (but not in the carb bowl). Fuel line was good. I took the bowl off to take a look. It was squeaky clean and the holes seemed to be clean too. However, I noticed that the bowl gasket popped off and it had expended by at least 1/4". See picture. I couldn't have put it back on even if I wanted to. There was also a bit of a leak on the bowl nut gasket, but nothing to worry that much about. Other reviews here have noted their gaskets expanding too as they absorb gas. I presume that's what happened here as it sat for a few months after I repaired and tested it. I've had some car guys describe "cheap Chinese gaskets" as having similar problems in some car applications. They weren't surprised.In order to repair this item further, I sought out OEM gaskets and came up with another Amazon item for $7.98 that included OEM gaskets, OEM bowl and OEM float (I didn't need that). The title is "Tecumseh Genuine 631867 Carburetor Float Bowl & 631021B Needle & Seat Kit OEM". I installed the gasket on the bottom of the carb, had to stretch it just a tiny bit, which made for a great fit. Then I installed the bowl, nut gasket and nut. Started up in 2 pulls and runs great for now.I'll give it 4 stars right now because of the price vs the $80 OEM carb, but just know that you should probably drop the extra $8 for the OEM seals and install them instead.

I was having trouble finding a carb that specifically stated it fit my Yard Machines (MTD) 31AE600E020 so this one said it likely would fit. It did! Really easy and pretty fast removal of the old carb that was leaking gas and putting this one on. Runs great now.

My MTD 24” snow blower with 5hp Tecumseh motor wouldn’t run when the choke was off. Probably due to clogged main jets causing it to run lean. This replacement carb fit perfectly and came with new fuel lines, vacuum lines, primer, filter and choke handle. Installed easily and the engine fired right up after a couple pulls. Couldn’t ask for more for less than $20.

Just like everyone else....great product with a nice pricetag. Exact replacement and my snowblower fired right up and purrs like a kitten again.

Very easy to install and worked on the first pull on my TORO 521 Snow Blower!!! Got done just in time for the snowfall the next morning!

It was so easy to change out and it fired up and run as smooth as anything.I would highly recommend changing out the hold carburetor rather than taking it somewhere to have it rebuilt. Far cheaper

This carb worked perfect. Nice job. Why waist time cleaning jets when this solution worked perfect. I was hesitant about no adjustments for idle and run mixtures but, this carb proved it is a good solution to get you going with little hassle. I hope fuel treatments and fuel storage additives work to prevent problems next year because the jets can not be cleaned and I will have to order another one.

Works as it should

Used on my snowblower. Had to use parts from old carb but worked well

Put this into my MTD snow blower and I tell you it runs better than it did new. I was shocked. Took it up north on my snowmobile trailer to the cottage minus 27. I had to turn my choke off right away. This carburetor is perfect. Thank you very much

Grabbed this for my oldman who hates messing w/ carbs on small engines. Had a couple smaller 6hp TECUMSEH snowblowers. Put this on a cpl and says they run great. hasnt complained yet.Bolted this on a blower that was sitting for 3 years, as well as another someone was throwing out. And had'm all fired up after fresh gas and spark plugs.90% of the time, the floats are stuck open or closed on these small engine carbs, either flooding them out, or not giving them enuff fuel too stay running.. And is a simple fix by taking apart and cleaning the float needle/jets/ etc. or getting a new kit.But theres nothing like a complete new carb.I was gonna take the bowl off and check the float. But i figured if bolt i on and try it. and on both types of blower, both started and Just gonna run it till it acts up. got a cpl tanks threw both and so far so good.But for the price, cant beat a whole carb that bolts on and runs. Me and my oldman like too always have extra parts around for small engines. and this is a good temp' carb too keep it running while take time and rebuild and clean the OEM carb. And leave it on the shelf for next time i need it.. Or you could mix and match parts. But I wouldnt advise that with these clones. Only thing I noticed, is the smaller carbs in these kits, dont have as many adjustments as some older oem carbs, or like the larger carbs for 8-10hp.... Prob a good thing in a way..As theres nothing for the kids or nuBB'e too turn and mess up.. Except for idle adjustment..No way too tune or tweak the fuel mixture threw-out the rpm range but didnt have too anyway..Its a snowblower, not a race car, or streetbike. Besides, it didnt matter. it started easy and ran at all settings, and kept running all day. next day it stared up did the same.. We Tried these on 2x diff small engine TECUMSEH blowers,1 mtd an 1 murray or something.. Also 1 larger 10hp ARIENS,( I got another cheap clone carb for from another listing) thou; there all swappable. You can put this smaller 4-6hp carb on a 10 and vice-vers. thou some will run warm, less power, usually better at low and mid rpm. But usually better than worse depending on adjustment..There yard tools. Not flat tack quarter midget racers..This kit seems too be set perfect for 4-6hp older TECUMSEHs. ALL 3X i put these clone kits on, start and stay running. Really all that matters for a yard tool.Even came with all the extra bits'- fuel line, shut off valve, primer, and filter, choke knob... Didnt need, but the primer, on/off valve and filter etc. Is nice too have. And if its a older machine worth changing too help eliminate any problems. I used the filters, primer and line on one. Only carb on other.If you can change oil you can prob' change this. and save tons of money vs. taking it too a shop. I dont know how many times ive saved blowers and other small engines from the scrap all from a simple good soak and blow' carb clean, tan clean, and new spark plug helps..If you got spark, but hard start, wont stay running, wont rev, etc etc. Id just grab a kit like this and try it before you give in. The fuel line is OK. could be a bitt longer, but long enuff too get it running atleast. And help elimnate one more little problem that'll keep these engines from running/starting easy.-Along with cleaning out the fuel tank. checking for spark. thats about all there is for the small engines.. Unless something major is wrong. but usually not..Real good kit over-all especially for the price. I dont know if i would install these as a service dealer, but then again Maybe. With no mixture screws, kinda makes them fool proof.. I wouldnt be afraid too keep a few of these around too have too atleast get a engine running.

Fits perfect on my snowblower, fired right up on first pull once it was installed. No leaks, seems decent!

Easy to install started right up didn't have to adjust anything the quality of the hose are good for the price the hose clamps could be better but work can't beat it for the price my last one i bought a few years ago for my other engine is still working fine no issues...

Seller: HOOAIProduct: 640084B Carburetor for Tecumseh 5HP MTD 632107A 632107 640084 640084A TORO 521 Snow Blower HSSK40 HSSK50 HS50 LH195SA - Tecumseh 632107 640084 640105 640299 632107A 640084A 4 & 5 HP Engines CarburetorProblem: The snowblower would only run with a fully open carb and would die on any load.Price: $16.99I have an MTD YardMachine Snowblower, model 317-611D18. It has a Tecumseh engine, model HSSK50-67364R. It's a 20 year old snowblower and the carb was starting to struggle. Eventually I had to open the carb all the way up and I couldn't keep it running under auger and snow load. I took apart the OEM carb, cleaned and and still had trouble when I reinstalled. I purchased this product in Feb 2018 to replace the carb. I performed the repair in Summer/Fall 2018 and things went very smoothly. Everything was working fine.We had a very mild winter in terms of snow for MN standards and the first time I had to use the snowblower was a couple of weeks ago. I probably would have bet my life savings that it wouldn't start for some reason and sure enough, it didn't. I suspected the carb again, as I was getting no fuel. Primer was getting suction (but not in the carb bowl). Fuel line was good. I took the bowl off to take a look. It was squeaky clean and the holes seemed to be clean too. However, I noticed that the bowl gasket popped off and it had expended by at least 1/4". See picture. I couldn't have put it back on even if I wanted to. There was also a bit of a leak on the bowl nut gasket, but nothing to worry that much about. Other reviews here have noted their gaskets expanding too as they absorb gas. I presume that's what happened here as it sat for a few months after I repaired and tested it. I've had some car guys describe "cheap Chinese gaskets" as having similar problems in some car applications. They weren't surprised.In order to repair this item further, I sought out OEM gaskets and came up with another Amazon item for $7.98 that included OEM gaskets, OEM bowl and OEM float (I didn't need that). The title is "Tecumseh Genuine 631867 Carburetor Float Bowl & 631021B Needle & Seat Kit OEM". I installed the gasket on the bottom of the carb, had to stretch it just a tiny bit, which made for a great fit. Then I installed the bowl, nut gasket and nut. Started up in 2 pulls and runs great for now.I'll give it 4 stars right now because of the price vs the $80 OEM carb, but just know that you should probably drop the extra $8 for the OEM seals and install them instead.

I was having trouble finding a carb that specifically stated it fit my Yard Machines (MTD) 31AE600E020 so this one said it likely would fit. It did! Really easy and pretty fast removal of the old carb that was leaking gas and putting this one on. Runs great now.

My MTD 24” snow blower with 5hp Tecumseh motor wouldn’t run when the choke was off. Probably due to clogged main jets causing it to run lean. This replacement carb fit perfectly and came with new fuel lines, vacuum lines, primer, filter and choke handle. Installed easily and the engine fired right up after a couple pulls. Couldn’t ask for more for less than $20.

Just like everyone else....great product with a nice pricetag. Exact replacement and my snowblower fired right up and purrs like a kitten again.

Very easy to install and worked on the first pull on my TORO 521 Snow Blower!!! Got done just in time for the snowfall the next morning!

It was so easy to change out and it fired up and run as smooth as anything.I would highly recommend changing out the hold carburetor rather than taking it somewhere to have it rebuilt. Far cheaper

This carb worked perfect. Nice job. Why waist time cleaning jets when this solution worked perfect. I was hesitant about no adjustments for idle and run mixtures but, this carb proved it is a good solution to get you going with little hassle. I hope fuel treatments and fuel storage additives work to prevent problems next year because the jets can not be cleaned and I will have to order another one.

Works as it should

Used on my snowblower. Had to use parts from old carb but worked well

Put this into my MTD snow blower and I tell you it runs better than it did new. I was shocked. Took it up north on my snowmobile trailer to the cottage minus 27. I had to turn my choke off right away. This carburetor is perfect. Thank you very much