Your cart is empty.
Your cart is empty.
O-Clamp 1.5
Front View Open View On trussSpecifications:
- 360 degree clamp that wraps around truss tubing
- Securely mounts fixtures to truss
- Non scuffing - Non scratching - Non scoring - Non denting
- Works great for the ADJ LTS-1, LTS-2, and LTS-30 lighting stands
Racquel Lynn Wilson
2025-08-23 10:29:23
Great clamps! Sure gives you better placement options and versatility on light stands and trusses with the drilled mounting holes. You can better fill in or evenly distribute fixtures. If you have smaller fixtures, these clamps allow you to space them closer together than the mounting holes in your truss or T-bars allow so you can fit more on, or if you have larger fixtures that you need to space further apart you can space them out as desired.Another great thing about these is that you can replace the bolt with a longer one, if needed for other purposes. This is great for me as I sometimes use a whole truss system and other times I just use the stands with T-bars and side arms. Putting in a longer bolt allows me to bolt 2 of these clamps to the tops of each T-bar so I can keep fixtures on the T-bars for use on stands or I can clamp the T-bars to the truss without having to unmount and remount each individual fixture. A real time saver!
Joseph Le
2025-08-16 15:41:49
Perfect for mounting to portable trusses. It has inserts so it’s compatible with different diameters. Easy to use and very sturdy.
Yougeshin govender
2025-08-12 15:37:03
i must say when i recieved this product in south africa i wasnt expecting great quality for plastic but man i am impressed!its absolutely solid & best part it works on my speaker stands,trussing & my gibraltar hardware keyboard stand!(just wish shipping was a little reasonable)but exellent product!
Scott Valentine
2025-08-07 14:31:34
I have a set of these from maybe 20 years ago that are slightly higher build quality. Some finish and small details are different, but they perform very similarly to the originals. I did find that the threads are different (bolt and wingnut) from previous versions. I use these for photographic lighting equipment, so it was necessary to go get some new bolts and nuts to fit standard mounting gear (1/4 - 20).I believe the actual build quality is pretty much the same, and I used to abuse them many times per week without incident. They are reasonably durable, cleaner than C-clamps (though not as strong), and much faster to deal with for light to modest instruments.
TGK
2025-07-09 10:47:45
Clamped this onto a tripod and it held 2 light fixtures whose combined weight was over 25lbs. The truss was actually 1.4in thick, which is normally too small, but I wrapped some velcro around the truss to make it slightly thicker. Even with the jerry-rigging, this clamp held the 2 fixtures up for weeks. Not sure how it would last in this position for longer, but I can confirm it's a great clamp for temporary setups on vertical trussing.
Andrew
2025-06-29 16:44:21
I use this clamp to hold a patio umbrella to my patio table. My table has tiny clearance at the bottom so I couldn't use a normal patio umbrella base. I clamp this clamp just below the table top so my umbrella doesn't blow away. It works excellently for this! The clamp was outside for about 6 months this year and still looks new. Super easy to put on and take off, seems very strong for my use.
Paul
2025-06-25 16:02:06
Sturdy & solid
ER
2025-06-24 14:50:29
My patio umbrella blew over and damaged the pole mechanism that allows the umbrella canopy to tilt. With it broken there was no way to keep it vertical without an ugly clamp. That clamp was cumbersome to remove each time I wanted to lower the umbrella as the "tilt" mechanism is high up on the pole.This truss clamp was the perfect diameter for the pole and is easily removed to lower the umbrella. It looks like a part of the setup.
ArBri 74
2025-06-08 17:58:49
Buen producto a buen precio
Olga Nakazna
2025-04-24 18:47:28
Great clamps! Nothing special, but very good quality! Thank you ADJ, great work! As usual. You are the best!
Chris DeLong
2025-03-16 13:12:07
These fit well to the pole you mount it to if you add a bit of paper or plastic or whatever to make sure it fills the ring space. There is no adjustability to the size really. It’s one size but if the pole is that specific size, it fits perfectly. Hit and miss.
Eduardo Bravo
2025-03-13 16:01:15
Muy buen producto, están hechas principalmente de plástico pero son muy resistentes, recomendables para colgar equipos ligeros.
BOB HAMEL
2025-02-04 17:36:45
Super easy to used and way more secure than hook type mounts.
Recommended Products
