Your cart is empty.
Your cart is empty.Product Description
Food Grade Silicone Material
Easy to Install
Durable to Use
Erstam
2025-08-10 14:32:27
Does what it's supposed to do. Fits my grinder perfectly. Quick and easy to put on and off to clean. Definitely helps push excess grinds through.
VerumFidei
2025-08-04 11:38:42
Even though this particular Aieve model is made for the Baratza Encore grinder, it works *perfectly* on my Capresso Infinity grinder (air-tight fit is important). Even though the groove in its bottom ring is just a few mm wider that would fit my Capresso hopper, the *inside* of the bottom ring just so happens to *perfectly* fit nice and snuggly over my Capresso hopper. It works fantastic. I love my Capresso grinder (which has amazing grind quality for an inexpensive grinder), but it does have a pretty significant amount of grind retention. I completely flushed out all previous grounds then tested my new Aieve Single Dose Hopper. I quickly pressed down 3-4 times right at the end of the grind. It completely flushed the retained grounds. I suggest pressing down sharply and releasing upward slowly 3-4 times just after your dose of beans finish grinding, while the grinder is still running. Releasing quickly on the upward strokes tends to pull a very tiny amount of fines and chaff up into the hopper, so I go down quickly and up slowly. I'm extremely pleased with this and that I'm no longer agonizing over upgrading to a much more expensive zero-retention grinder. Highly recommend for the Baratza Encore and the Capresso Infinity. I've also purchased Aieve's larger model (several color choices) for the built-in grinder on my new Breville Baratza Pro espresso machine. I got the gray one; cool looking; looks like it's made for it.
CNYGamer
2025-08-03 11:22:38
I love my Encore grinder. Sure there are pricier, better-performing grinders on the market. But for the price-to-performance ratio, the Encore is top shelf.One issue with gravity-fed burr grinders in general is the loss of grind. You put some number of grams of beans into the grinder, you get some smaller number of grams out. Those extra grams are hanging out in the mechanism of the grinder because the grinding process creates static cling and the grinds stick to it. And those orphaned grinds stay in there getting stale, which reduces the quality of the next day’s pot.This bellows very nicely pushes most (but not all) of those orphaned grinds into the reservoir to be brewed. It’s as simple as that.It’s easy to detach and wash this all-rubber device. It fits well over the top of the grinder, and the grinder’s existing plastic top fits well over the device.The only small complaint I have is that bits of grind get knocked upward into the corrugated sides of the bellows. So it does need to be removed and cleaned every few days or so. But running it under the sink with a soapy sponge is a quick, easy process.
Customer
2025-07-28 18:40:49
I tested this bellow on the Baratza Encore and the Baratza Encore ESP.The fit was perfect, and it worked as intended to blow fine grounds through the grinder.THIS IS IMPORTANT. You do not want to leave coffee dust sitting in your grinder waiting to drop into your next batch. It will be stale and not suitable to combine with your fresh grounds!It's quickly installed and uses the lid that comes with the grinder hopper already.Here's a tip, leave the bellows connected to your hopper and store it this way. you'll only need to install it once. It is easy enough to install but saves time if you leave it connected.
TDH
2025-07-16 19:33:37
Use this with my baratza esp, works like a charm. Always a nice clump at the end that drops out with one little push from the top
William McGreal
2025-06-17 15:50:59
I get the idea, keep costs down...use the manufacturers hopper. But the rim is so, so, so wide, that the bellows has a hard time staying in place whenever you use the... you know... bellows. I finally switched to a beloows that replaces the original hopper and is more obviously a single-dose hopper.
Chris M.
2025-06-04 20:20:03
The Baratza Encore is probably the best grinder you can buy for a sane price. But it has one critical flaw, it leaves a little coffee up inside it that then spills out at the worst times, Llike when removing the hopper, or leaving about 1-3 grams of a different grind setting to contaminate your next espresso shot will net you a bit of unwanted coffee spilling out, often all over your counter or even into the hopper slot forcing you to brush out the grinder.This simple bellows like thing-solves that. A few pushes and it blows out the grinds. Its an ingenious solution, its so useful Baratza should have incorporated it into the grinder design.It fits tight, its sturdy enough you can still still turn the hopper to adjust grind. The lid fits on an off nice enough. It goes poof and stands back up when you are done like silicone.And the price is good. It works. If you use an Encore grinder, you *need* this.
R. Jones
2025-05-15 10:52:38
If you have a coffee grinder that this fits, it's a necessity. It's cheap and effective. You don't realize how many grounds are left sitting in the grinder blades until you pump this thing a couple times. I really feel like this should already be included with higher quality grinders.
Pilloried
2025-05-09 20:57:51
If you care deeply and passionately about coffee, this is worth the price. It’s fun seeing how much grind normally gets stuck. This blows it out.
Andrew B.
2025-05-04 19:58:25
I bought this for my Baratza Encore ESP. It fits perfectly and works exactly as described. Very happy with the purchase.
Phil H.
2025-04-22 12:38:05
We use our Baratza Encore ESP as a single shot grinder. We weigh our 14g of beans in each time. We noticed clumps would sometimes come out at the end.I purchased the bellows and was amazed, at the end of grinding we can get between 0.5-1g of coffee out by using the bellows. So hopefully no stale grinds sitting in the grinder. Did look at a single dose hopper but this option looks and works great. Ps doesn't fit well upside down!
Jason
2025-03-06 17:01:45
Didn't seal right the first time I tried it, but gave it another shot today and it worked great
David Matthew Gray
2025-02-18 20:08:03
The media could not be loaded.
Recommended Products