Your cart is empty.
Your cart is empty.Product Description
Hydraulic Knockout Punch Kti
- Powerful 8 US TRUE TON Punching Capacity. Compatible with GREENLEE and other domestic punch tooling 3/4"-16 threads.
- 10 Die Sets for conduit fitting size: ½, ¾, 1, 1¼, 1 ½, 2",2-1/2",3"3-1/2",4" .
- Punching Thickness Capacity: 1/8 inch (10 ga) Steel Punching Capacity, 1/16 inch Stainless Steel.
- Punches: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only), Fiberglass, Plastic
- This hydraulic knockout hole punch driver kit features a compact and durable structure with high hardness and great quality, easy to operate to get a perfect, uniform hole. Suitable for power engineering, automobile modification, construction, machine tool sheet metal and other industries
Conduit Punch and Die
- ½"Conduit Punch and Die: Actual hole diameter is 0.89" for ½" conduit
- ¾"Conduit Punch and Die: Actual hole diameter is 1.11" for ¾" conduit
- 1"Conduit Punch and Die: Actual hole diameter is 1.36" for 1" conduit
- 1¼"Conduit Punch and Die: Actual hole diameter is 1.7" for 1¼" conduit
- 1½"Conduit Punch and Die: Actual hole diameter is 1.95" for 1½" conduit
- 2"Conduit Punch and Die: Actual hole diameter is 2.42" for 2" conduit
- 2½"Conduit Punch and Die: Actual hole diameter is 2.91" for 2½" conduit
- 3"Conduit Punch and Die: Actual hole diameter is 3.54" for 3" conduit
- 3½"Conduit Punch and Die: Actual hole diameter is 4.04" for 3½" conduit
- 4"Conduit Punch and Die: Actual hole diameter is 4.54" for 4" conduit
Hydraulic Knockout Punch Kti
Suitable for power engineering, automobile modification, construction, machine tool sheet metal and other industries
- 1 X Hydraulic Punch
- 10 X Die Sets for conduit fitting size: ½", ¾", 1", 1¼", 1½", 2",2½",3",3½",4".
- 1 X 7/16"x3/4" Draw Stud
- 1 X 3/4"x3/4" Draw Stud
- 1 X Plastic Carrying Case
- 1 x Ram with Hose
- 1 x Spacers
- Punching Thickness Capacity: 1/8 inch (10 ga) Steel Punching Capacity, 1/16 inch Stainless Steel.
Rob
2025-08-07 15:42:41
works great and as expected. also, came with extra seals for the hose. That was nice.
Benjamin T. Busiek
2025-07-25 12:40:10
I have used this for a bunch of knockouts in steel enclosures and it works well.My only complaint is the instructions are not great, and I managed to mess up the assembly a few times. If it feels like it is harder to pump than it should be double check you set it up correctly.
Daniel MacPheroson
2025-06-17 17:34:55
Worked well. Had to punch wiring holes into steel studs, some .1†thick. Uni-bits are pore choice. Machined an adapter for the 2†punch to use the 7/16 pull stud. That is all that is need to punch 26-gauge steel. I needed ≈900 holes in my steel eve soffit for vents. Just hand Punch a .5†hole for the stud than the knockout punch, No drilling required. The hose could be a little longer.
Greg Lamb
2025-06-16 10:04:42
na
Eric
2025-04-25 15:44:43
This must be metric, because the 2" hole is actually 60mm, or 2-3/8". So the biggest hole is not 2". It messed me up a little because I cut the hole thinking it was exactly 2", before measuring it.
Customer
2025-04-03 13:24:54
Product seems generally fine, but o-rings or assembly was poor, and started losing pressure and leaking hydraulic fluid on the second use. No way to contact company, and outside of 30-day return window. Essentially a waste of ~$200
Michael’s Coffee Shop
2025-02-05 17:03:09
Work very well. I’m very pleased with quality.
Recommended Products
$34.99
$ 17 .99 $17.99