Your cart is empty.
Your cart is empty.From the manufacturer
Ancor Marine Grade Products
For over 40 years Ancor has been an industry leader for quality tinned copper Marine Grade wire and
cable. Ancor’s comprehensive product line includes everything required to complete a wiring project. This
includes Marine Grade wire and cable, terminals and connectors, wire management products, and hand
tools. Ancor designs products to the highest standards that meet UL, ABYC, NMMA and USCG standards.
What Makes Ancor Different:
Selection
Over 1,500 electrical products are designed to work together as a system.
Industry Standards
Industry involvement ensures products meet ABYC, NMMA, and Coast Guard standards.
Quality
Product quality is managed in a manner consistent with international standards.
Kim & Paul
August 20, 2025
These work perfect
Toy4u
August 13, 2025
Original and that says it all! Highly recommended!
Chris
July 4, 2025
I like having the right part for the right job. These work great in my boat and are probably the best out there. The cheap stuff will work but at some point, they corrode and it is usually at the worst time. These work well in a marine environment and are very durable. I would advise using Ancor's adhesive lined heat shrink tubing with these if you are in a marine environment. It costs more but you shouldn't have any problems whatsoever if you do.
Charles R. Melaney
May 29, 2025
Good quality for diy solar battery bank. Crimping may be an issue as the die set of the crimper needs to be from 30 to 33 mm2 for 2 awg welding wire. To get 30 mm2, I set one die to 25, and the matching die to 35, that yields 30 mm2. I was able to double crimp the lugs which resulted in really good solid crimps and cold welding. There will be a bit of pinched metal on one side of the lug, just cover it with the heat shrink material, it didn't cut through the finished heat shrink.Alternative long barreled heavy duty battery lugs cost about $7 per unit which I felt were not needed for my application.
Ray
March 17, 2025
Works as described
glp1156
January 18, 2025
Price is higher than others, but it is made by Ancor.
Michael
December 19, 2024
I've tried other brands that failed during normal usage Ancor has passed the test of time. Well worth the money
Ryan
November 12, 2024
Perfect fit for 4/0 lugs. There are a lot of 120mm /10mm lugs being sold as 4/0 3/8. The metric lugs simply don't fit the cable and would require significant deformation to attempt a secure fit.Using both J1127 welding cable and SGX marine cable, these fit tight. You do need a clean cut to get all strands inserted but the tapered barrel helps.Lugs are heavy bit not rediculously heavy where they are hard to crimp. I used a hammer crimper with good results, about 10 moderate force whacks with a 16 oz hammer.Look for 1†glue lined heat shrink to seal the lugs to cable, TEMco brand seems to work well.
Recommended Products