Your cart is empty.
Your cart is empty.J. Castor
2025-09-04 17:36:36
This is the correct replacement for the 2010 Ford Edge vacuum booster. The installation was without issue except that a new O ring should have been provided. Luckilly the old one was still usable.
Kendra Schulz
2025-08-06 11:50:56
This is a great product, it was very straightforward to install and one thing to note; MAKE SURE YOU ADJUST THE PUSH ROD FOR YOUR MASTER CYLINDER! There is a small adjustment screw and nut on the engine side of the brake booster. Mine was bottomed out and wouldn't even touch the Master Cylinder. After setting it the screw was still pretty loose and ended up loosening shortly after driving it around for a few minutes but some lock tight fixed it no problem.
Benito Galarza
2025-07-09 15:10:19
This is my second replacement booster and same issue nearly caused a car crash spend an extra 50 to buy oem would make brake pedal hard with no brakes at times other times would have to press all the way down for brakes to engage everything properly installed and bled parts are junk
brandi friedmann
2025-06-15 18:53:47
List says it will fit my car but it’s the wrong one. Can’t find where to email seller
Nate
2025-05-19 14:46:21
The media could not be loaded.
Jennifer Axe
2025-05-05 14:37:21
It works perfectly! I was able to get my car back on the road within a couple hours
emond k bennett 111
2025-02-10 10:23:55
THE BRAKE BOOSTER FAILED ON THE FREEWAY DURING A PANIC STOP .GOING 65 MPH AND TRAFFIC CAME TO A COMPLETE STOP. BRAKES FAILED AND WAS ABLE TO SWARVE INTO LEFT LANE TO AVOID AN ACCIDENT. THIS COULD HAVE BEEN FATAL.
Recommended Products