Your cart is empty.
Your cart is empty.Product Description
2.50-4” Solid Rubber Tires and Wheels
- Made of high-quality
- 100% natural rubber
- These solid tires are highly durable with a 3x longer life span compared to other types of flat-free or filled tires.
- Performs excellently on terrains and applications where pneumatic tires can’t handle.
- Has more structural integrity than pneumatic tires. They won’t go flat or deform. Debris puncture won’t impair the tire’s function and it can go on as if nothing happened!
- Premium steel rims for heavy-duty workloads and equipment that’s always on the go.
5/8” Axle Bore Hole
- Ball bearings minimize rotational friction and provide both radial and axial load support.
- It also provides flexible rotations and load balancing, enabling you to push less and push easier.
- Easy to install and uninstall.
- There’s no need to install separate parts on the rims. And you definitely don’t need specialized equipment!
- Just insert into the axle and install an axle pushnut cap or cotter pin to secure the wheel assembly in place and you’re good to go.
10 x 3.50-4” Solid Rubber Tires and Wheels
- Rim-bonded tires prevent the solid rubber tires from slipping and falling off from the rims.
- Heavier tire weight lowers the center of gravity, stabilizing the equipment.
- Dense tread pattern design for optimum grip even on wet slippery surfaces. The treads also offer low rolling friction and high directional stability, making up for the assembly’s heavier weight and stiffer structure.
Anthodium
August 8, 2025
I used these nice AR-PRO wheels to upgrade Snow Joe SJ26E electric snow thrower. See attached photos. Here are the parts I used:AR-PRO (2-Pack) 10-Inch Solid Wheel Replacement[ASIN:B08SHV53NN]AR-PRO 5/8†x 36†Zinc Plated Steel Rod[ASIN:B09T6Q7W5S]* Cut the rod to 23" width. Perfectly fits AR-PRO wheels. I wasted time with another brand 5/8" steel rods due to poor quality control (a few millimeters too large)Heavy Duty 10-Inch Shelf Brackets[ASIN:B0D57W76DD]* Nice solid 1.5" wide metal brackets. I used all 4 brackets to reinforce the handle bar and wheels.2 Heavy-Duty Wheelbarrow Axle Brackets Only[ASIN:B0BXW53SW6]* These axle brackets have a tiny dimple for single-wheel installation. Drill out the dimple and expand the opening to fit the steel rod. I could not find 5/8" axle bracket without a dimple.KZNANZN 5/8" Bore OD 1-5/16" Shaft Collars Double Split Screw Style [ASIN:B07FLYTDW2]--OR--Jeremywell 5/8" Bore Zinc Plated Set Screw Shaft Collars[ASIN:B0197MHINI]* I used two KZNANZN shaft collars to prevent any loosening.Rust-Oleum Gloss Black Brush On Paint[ASIN:B000LNQZ32]* To prevent rust, paint all exposed screws / washers.Zip Ties[ASIN:B075QDYFSB]* Tie-up the cords.Gorilla Heavy-Duty Black Duct Tape, 1.88" x 35 yd[ASIN:B000CSS8UE]* I covered-up the large Snow Joe logo with heavy-duty black tape.100-ft 12/3 Heavy-Duty Go Green Outdoor Extension Cord[ASIN:B0BL3WY1V7]* Very nice extension cord that will accommodate this 14.5-Amp machine.Woods 22849 Metal Extension Cord Reel[ASIN:B0064R6D18]* Perfectly fits 100-ft 12/3 extension cord.
SH
August 5, 2025
I was looking for solid rubber wheels to replace the air filled wheels on my Bosch Contractor Table Saw. The original wheels went flat every 2 weeks. I wanted high quality, rugged functional wheels with steel hubs, real bearings and rugged non flat rubber tires. These wheels are very high quality and fit perfectly. They come with 2 sets of bearings for 5/8 and 3/4 inch axles. Also included were hard plastic spacers, which I didn’t need. They are well constructed, very sturdy, look great and are of the dimensions listed by seller. The hubs are steel, the bearings are quality and the rubber tire is super tough. Highly recommend.
AJ Surf
August 3, 2025
They worked for changing out the pneumatic tires on my Honda Pressure washer. Im glad they came withnumerous inner bearings sizes. I would have given a 5 star but getting the bearings swapped out requireda puller and a punch and some elbow grease. New ones went in easy.
Barry Taylor
July 5, 2025
I purchased these for a small Murray Riding Mower. I got so frustrated with tying to put tubes in the blow up tires I had on the mower so I bought these to replace the tires. They work well but....1. These tires will slide if you are tying to make a sharp turn on even slightly wet grass.2. These tires can have dirt cake up on them so that can make the ride pretty rough.3. Your mower will perform better with blow up tires, but they are MUCH more expensive of a solution.The observations above, IMO, have NOTHING to do with these tires as a product. i think what i am saying would be true of any "Solid" tires. I LOVE the fact that I will NEVER have to attempt to put a tube in the tires of this mower again. Once you get used to the issues I outline above, you are fine. After a few cuttings you WILL get used to it! Your mower is NEVER going to handle the way it did with blow up tires, but - for me at least - it is worth it!GOOD LUCK!
Fritz loesch
July 2, 2025
Hubs and bearings are great quality. Tires are not solid. Rubber is advertised. They are solid plastic not what I needed for my use case these will be returned.
Brent
June 23, 2025
only non pneumatic ten inch diameter wheel i could find with 1/2 inch axle holes. they came with 5/8 bearings installed. had to beat them out with a hammer and punch and tap 1/2 inch bearings in with a socket. fits my mr heater torpedo 175k btu perfectly. no more flat tires.
Customer
June 22, 2025
For replacement tires for All Power 6000 W Generator (APG 3009N) flat free and it comes with 3 sized sets of bearings with spacers. Thought the bearings installed were 3/4'" but they were 5/8". No matter just knock em out and use the ones you need. Our problem with old wheels was the rims separated and both wobbled. APG service ("George") said our axles were 3/4". Most generators use 5/8" axles. We're 220 miles from our place so getting there to measure is crazy. This takes care of problems whatever the size will be when we get up there (Upstate NY). Appears to be well made. For the price you can' go wrong and you'll have 2 extra sets of bearings (3/4s,5/8s & 1/2") for other trailers or whatever. Have a Happy Holiday everyone. Quick delivery. For the price great. Quality appears to be good.
Robert L. Stevens
June 2, 2025
The wheels themselves are fine. Each wheel came with three bearing sets for different sized axels (3/4", 5/8" and 1/2"). The 5/8" was preinstalled. I needed to replace the 5/8" with the 1/2". I tried to punch out the bearings from the opposite side with a punch and hammer. No go! I tried other methods - NO GO! I finally took my air hammer and punched it out, taking about 10 seconds for each hub bearing. The inside of the hub had some kind of coating and metal residue holding the bearings in. I wire brushed it clean and tapped in the 1/2" bearings with no problem. Manufacturing defect?
PapalouIng
May 8, 2025
Very nice quality, better than expected!
Marie-France Boulerice
April 10, 2025
I used it for transporting furniture.
Claude Mourez
February 25, 2025
Those wheels fit perfectly on my cart and better than the old ones.
bill
February 24, 2025
Very nice. No more flats.
Arnold Voth
February 5, 2025
Competitively priced,came very fast and were as described
Recommended Products
$61.29
$ 23 .99 $23.99