Your cart is empty.
Your cart is empty.Product Description
Non-slip Pattern Design
The special tread design enhances the grip of the tires and ensures that the wheels run smoothly on any surface.
Upgraded Ball Bearings
Equipped with upgrades ball bearings for smoother wheel rotation.
Solid Polyurethane Foam
The layered 100% premium PU ensures that the rubber tires can perform excellently under heavy-duty applications.
Sturdy Construction
The rims are steel with solid metal hubs that resist impact cracks and suitable for all-terrain use.
Upgrade your equipment with these heavy-duty, puncture-resistant tires. Designed for rough terrain and demanding applications, they provide reliable performance and eliminate the risk of flats.
Dman
August 22, 2025
The wheels/tire package came intact and in excellent condition. I chose them because I needed 3/4-inch bearings to fit my axle shafts. The wheels also came with 5/8-inch ID bearings but also had 3/4" and 1/2" bearings. Removing the 5/8" bearings was originally difficult because they fit tightly inside the bearing holding shaft. After carefully applying heat with a propane torch, they came out easily. If you purchase these be careful if you need to remove the original bearings. Do not strike the inner bearing race when removing them. Use a drift punch against the outer bearing race only. One reviewer said he destroyed a bearing when removing them. Heating the housing did the trick. I hope this helps.
D R
August 15, 2025
After years of waging a battle on my pervious home hand truck tires trying to keep air in them although there was no perceivable leak I decided to take the leap on trying run flats to move relatively heavy things on a hand truck. So far it has been an improvement for sure simply because when I grab the hand truck I don't also have to have a portable air compressor in my hand. The ride is a bit rougher but that's to be expected.Hopefully this review is the last time I have to think about them for several years, if that's the case then that will be a win in my book.
Four Terriers
July 25, 2025
These were exactly what I needed - inexpensive run-flat tires for a hand truck that I use outside infrequently. I could also use one on a wheelbarrow, because the set of included adapters is impressive.But DO NOT think of using these indoors! These are a hard rubber compound. They have no real give and they will not be friendly to easily damaged floors - like hardwood or some tile.Given that they are best for outdoor use I was disappointed with the tread. It's a decent pattern but it is very shallow. These appear to be solid rubber, so they could be molded or cut deeper. A more aggressive pattern would be nice for outdoor / warehouse work. That cost these a star.Other wise they fit the bill great. No more putting air in the tires when they go long periods without use. They spin nicely on their bearings too, so the squeak I used to have is no more.Installation was a breeze for me. Remove a Cotter pin and slide the old wheel off and the new one on. Reinstall the pin. Done in five minutes.I think the price is fair. These have a solidly-built steel hub and are nicely painted. Care was taken in making them. I expect they will outlast me (or the hand truck).
Tricia G
July 8, 2025
I had difficulty finding this size wheel with 1/2 bore. Most all these Wheels come with 5/8 bore. I bought these because they came with 1/2inch bearings that could be switched in.I had to use sledge hammer to knock the 5/8 bearings out. And on two wheels, the bearing just came apart instead of out. This was not easy and slightly scuffed up the new wheels in the process. It took me 4 wheels to make 2 usable ones. I ended up using a press to install the 1/2 bearings which went ok.The 2 pack only came with enough bearings to change one wheel. Each wheel requires 2 bearings, so a 2 pack should have 4 bearings in each size but only come with 2. Fortunately I accidentally ordered 4 wheels.The Wheels themselves are more like hard plastic than rubber. I would have preferred something closer to rubber, but at least I don't have to put air in them. This is for an compressor that won't move very often so maybe it will be fine.
Gerald
June 27, 2025
I have a large two wheeler that I use a lot and the tires kept going flat. I replaced those tires with these and what a difference. No more flat tires. It was very easy to change out the tires and now I don't have to worry about having to reseat the tire and fill it with air. I am pretty rough with the two wheeler so having tires the won't go flat is great. these do not roll quite as smoothly across grass as the pneumatic ones, they dig in a little. But overall they are perfect for most of my moving stuff around. I would say if you have anything with 10" wheels that are pneumatic, switch to these and make your life easier. I almast forgot to say these come with bearings and spacers that make changing them out very easy.
Will
May 25, 2025
Obviously these are cheap, but the rubber on the outside is the equivalent of hot wheels plastic. Would not recommend for anything indoors, would scratch floors
M. Taylor
April 19, 2025
Comes with 2 wheels with 5/8" bearings installed, and also comes with 4x 3/4" bearings, and 4x 1/2" bearings, and 12x rings. Unlike some other reviewers, I got everything needed to change both bearings on each wheel (see pic). Luckily, I needed ones with 5/8" bearings, so I did not have to change the bearings on mine. These are solid heavy-duty plastic, not rubber, so don't expect any built-in shock absorption or extra grip on smooth surfaces.
Cheryl w
January 17, 2025
I ordered these tires and wheels, because it said the bearing size that was in the wheel was 3/4†when I got the wheels, it had a smaller size bearing in it. So I had to bust out the old bearings, which was not easy doing and try to put the new ones in and you have to be careful banging on them cause they fall apart now I have to wait. I ordered more bearings because one got damaged. Would’ve never bought them if I knew I had to do all that work.
Recommended Products