Your cart is empty.
Your cart is empty.Product Description
Step 1.Clean dent surface.
Step 2.Put the glue sticks to gun and heat, connect the power source and preheat for 5-10 minutes.
Step 3.According to the dent size to choose the Glue Puller Tab, then put the heated glue on puller tab, immediately place puller tab in the center of the dent and hold on until it sticks.
Step 4.Let the glue cool for about 5-8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter.
Step 5.After the glue cooling,use a golden dent lifter or bridge puller to align and press the puller to pull up the dent. Repeat the above steps until the dent disappear.
Step 6.After finishing the dent,use the alcohol or hot water to clean the glue which on the car and the puller tabs.
If the repair fails, please repeat the operation until it is repaired.
Package Included:
1 x Sliver bridge dent puller 7 x Dent Puller Tabs
1 x Mini Hot Melt Glue Gun 5 x black hot melt glue sticks
5 x yellow hot melt glue sticks 2 x Rubber Scraper
1 x Alcohol Spray Bottle 1 x black cloth
Jerry B.
August 25, 2025
very pleased, everything worked great. my son had 4 dents in his car, we got them all out. very happy.good product, good price and as always great shipping, thanks all
Harth Huffman
August 22, 2025
The good news is that I was able to pull a large dent partially out. The bad news is that I went to finish the job and pull out the other parts of the dent, but the glue gun would not heat up. It worked once, then died. I have to go buy another glue gun, which better last longer than one use. I cannot give more than one star if it is not durable enough to finish one job.
Danny B
June 28, 2025
Works well.
Marcus W.
May 9, 2025
Follow the instruction carefully and the dent puller magically removes the dent. It's super easy to use, just thoroughly clean the dent area first, put the glue in the glue gun until it warms up, apply the glue and correct size puller tab, make sure to let the glue cools, put the bridge over the puller tab making sure the tab is close to the center, gently turn and knob and watch the dent disappear.Removing the glue is also very easy. Most of the time pulling the tab removes the glue but if there is still any glue left, a bit of rubbing alcohol does the trick. Sometimes you may have to apply the pull in the same dent one more time, the key is being very patient. This can easily save you hundreds of $ by making repair yourself instead of taking it to a autobody shop. I would recommend this product.One more tip: if there is any paint left from the car that hit you, apply a little rubbing compound to remove it.
Justin Shen
April 15, 2025
May seem obvious, but if you have a ceramic coating on your car the glue will not adhere and this tool will absolutely not work to repair your dents. I tried 6 times with both types of glue that were provided and they both did not adhere. It will stick to your car and then as soon as you apply pressure to pull the dent out it will pop off instantly. If you do not have ceramic coating, this would work work perfectly for small dings.
Pedro
April 3, 2025
I think that this works as it described.
Abigail Guildner
March 12, 2025
I was looking for an inexpensive fix for a parking lot door ding on my new car and figured 1. best case scenario, it works and I've saved myself tons of money or 2. worst case scenario, it doesn't work and I'm only out $16.First, as many of the reviews indicated, the hot glue gun arrived broken. I have another one and was able to play around with the different sized parts on my husbands crummy car with hail damage. Once I felt confident, I tried it on my new car with marginal results. While the door ding is less noticable, the product actually bent the panel out a bit as the part didn't separate from the glue like the other times I tried it. I do not blame the product, but user beware. Hopefully I'm the only one who notices.Lastly, I dispise directions that are terribly translated into english. They are tough to understand and not always clear. For the price, I shouldn't be suprised. Overall, I would not recommend.
Dave Davis
December 26, 2024
Easy to use.
Recommended Products