Shopping Cart

Your cart is empty.

Your cart is empty.

Dent Puller - Dent Remover with T bar Dent Puller and Upgraded Dent Puller Tabs for Car Dent Repair and Metal Surface Dent Removal

Free shipping on orders over $29.99

$30.59

$ 14 .99 $14.99

In Stock

1.Color:Blue


2.:Tool Set


  • Pro Design - Principle of leverage to design the slide hammer dent puller is ergonomic, efficient and labor. Works with hot melt glue to pull the dents out. (This dent repair kit is come with glue gun and glue sticks, There is a switch on the handle of the glue gun, which needs to be turned on and preheated for 5-8 minutes before the glue flowing out can be used.)
  • Paintless Repair - The T-bar dent puller is made of tempered high-carbon stainless steel and standard stainless steel. In the parts of the body contact with high-quality rubber precision package, can avoid damage to the original paint.
  • Widely used - Dent puller kit is suitable for most of big dents. Efficient action on automobile and other metal surface dents. (The applicable temperature for glue sticks ranges from 0 to 40degrees. If the temperature dropped below 0 degree, the hot melt glue mayquickly curdle and cannot be sticked. For this case, just heat the joint with a hairdryer before use this product.)
  • For DIY - Dent removal tool is coming with detailed repair steps introduction for operating, it makes the dent removal process easily. Our car dent puller can help you repair dents quickly by yourself for many times. (Tips: This dent repair tool kit can effectively repair 90% of the repair effect, but not repair 100% of the perfect effect. Please read the instructions carefully before buying.)
  • Customer Service - Please read the product description and manual carefully before use. Contact us through Amazon for any questions, We will help you solve your issues. (Note: Please do not trust any third-party information to avoid being deceived, We only service through Amazon.)



Product Description

dent puller
dent puller
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.

How to Remove the Dent ?

dent puller

Step 1. Clean dent surface.

Step 2. Put the glue sticks to gun and heat, connect the power source and preheat for 5-10 minutes. (This dent repair kit is come with glue gun and glue tabs, There is a switch on the handle of the glue gun, which needs to be turned on and preheated for 5-8 minutes before the glue flowing out can be used.)

Step 3. According to the dent size to choose the Glue Puller Tab, then put the heated glue on puller tab, immediately place puller tab in the center of the dent and hold on until it sticks.

Step 4. Let the glue cool for about 5-8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter. (The applicable temperature for glue sticks ranges from 0 to 40degrees. If the temperature dropped below 0 degree, the hot melt glue mayquickly curdle and cannot be sticked. For this case, just heat the joint with a hairdryer before use this product.)

Step 5. After the glue cooling,use a golden dent lifter or bridge puller to align and press the puller to pull up the dent. Repeat the above steps until the dent disappear.

Step 6. After finishing the dent,use the alcohol to clean the glue which on the car and the puller tabs.

Note: For detailed operation and more tools, please refer to the instruction manual. (Tips: This dent repair tool kit can effectively repair 90% of the repair effect, but not repair 100% of the perfect effect. Please read the instructions carefully before buying.)

dent puller

Packing Listing

1 x T-bar Dent Puller

2 x Red Pro Dent Glue Tabs

16 x Black Pro Dent Glue Tabs


Sam
2025-08-19 15:23:37
This gun works well and has good solid feel to its construction. I bought it mostly to secure various components and modifications on circuit boards from vibration that will be used in harsh environments. It works well and once up to full temp (which takes a little longer than I would like, but its by no means a big hassle) it will seriously push some glue. Like many glue guns it sometimes will have some leak out the tip when not being used, but I have seen much worse than this one. The included black glue sticks are quite serious. I learned this the hard way after using them too attach something I planned on removing later. It was not easy to remove. Usually that's the intended goal so this is a good thing in my book. Use it in moderation though, because the black glue is even harder to cut/shave down with a knife than what I'm used too dealing with. Overall, excellent performing glue gun.
Vlad
2025-08-15 11:52:24
Although looks very small on images, it is a big glue gun.Pros:+ Industrial or at least professional grade, very solid quality.+ Heats fast and easy to work with.+ Very inexpensive for quality!+ Light gives you a clue if it's on or off.Cons:- I would like to have a longer cord, but extension cord solved this issue :)I used it to have plastic bumper fixed, worked very nice and I saved a bunch of money!I am completely satisfied with this purchase and would recommend this to friends and family.Thanks for reading!
Sheree Sieb
2025-07-28 15:08:46
i received this Manelord hot glue gun on 02/28/2023. Bought extra boxes of glue. first time i used the glue to recover chair cushions. If you have ever taken on that job, simply right. worked like a charm. Today 02/03/2024 I busted the glue gun out to glue a lightweight 4x4 tile on a wall. The problem is that the glue would not heat up. Crazy right. well for the gun being $18 and $20 for 2 extra boxes of glue sticks. Some people would say let it go..The problem is that when telling amazon of having product problem, I was told to whistle dixie. Back in 2003 I bought a $3 Or $4 dollar little craft glue gun, still works like a champion. I understand that it has been almost a year. By looking and inspecting the problem , amazon could see it had barely been used. I don't want my money back, just want the defective gun replaced. Sad, of late amazon as declined big, big time in customer service. Once feeling that they were the greatest company in the world. buy one i only hope it works like it should. peace to all
DemonDog
2025-07-13 19:13:41
Added back one star for customer service offering a refund.Since the tool didn't exactly fail completely and the supplier appears to stand behind their product.========= Original post ===========Nice assortment of tools.Tried this on a door dent and it took 3 or 4 tries!The hot glue kept popping off before the dent was pulled out. (Yes, it was cleaned a prepped.)Never did pull the dent completely out. But, does look better.Might work better on some of the foreign beer can rides.On real Detroit metal it leaves a lot to be desired.Don't recommend. Hence the 3 stars.
NAJ
2025-06-10 18:54:51
Tried to pull a quarter sized dent from the tailgate of my aluminum body Ford truck. Attachments were all too big for small dents. Might work well for golfball sized or bigger. Components seem of good quality.
Jennifer Blystone
2025-04-14 15:51:06
As described
phillip r
2025-03-22 18:49:10
I was able to work with this and figure it out. No more dent in my passenger door.
ColaMom
2025-03-20 17:32:30
This is ok for light use, but really not what I needed for some larger sized dents. I ended up buying a stud welder/puller which was MUCH heavier duty and worked well for me. But, I was hoping to use this tool and avoid having to strip down to the metal and also having to paint.Here are some key points about this kit:- The package actually contains a small glue gun and several sticks of glue (both black and clear). This was NOT in the item description, so I purchased the 100W glue gun bundle and sticks for an extra $10 or so. The 100W gun is much better than the one included in the kit.- There are 2 kinds of glue sticks. One is clear colored and one is black. The black glue was of no use for me. It's too tacky and just didn't stick well. It was also more difficult to remove. The clear glue was much stronger and easier to use. However, it would constantly come loose before the dents were pulled out. Once the glue was applied, I tried leaving it sit for 5 minutes, 10 minutes, 20 minutes, 30 minutes...it didn't seem to make a difference. I tried so many times to make this work, but it just made me frustrated in the end.-The T-Bar puller weight is sufficient, although somewhat light weight. But the problem is that the glue kept giving up before I could really put any force on it. The red pro glue tabs are easier to use and gripped well to the puller, but they are not for smaller dents. The puller attachment for small dents slips out very easy. I ended up hitting my hand on the wall several times because it would slip out. When it didn't slip out, the glue would come undone. Having to clean up the glue so many times off the car and the tool just got old.Just to be clear, I did have some success on a couple very minor dents. I even got the larger red tab puller to stick a few times where it moved the metal some. But as an overall kit, it was a disappointment for me.
Jim Lucas
2025-03-09 16:44:45
Very fast delivery and parts are of good quality.
Vaitinadan S
2025-02-23 10:50:53
Ok
Peter
2025-02-17 11:06:05
Exactly what I wanted. Yet to use it.
Kristoff Anthony Patoir
2025-01-19 11:33:02
I would not recommend this product. If you're looking to remove small little door dings it doesn't really do the job. On top of that the glue sometimes gets stuck to you paint and is a pain to remove. Sometimes the glue will come off with the first pull and overall is just very inconsistent with the results. Maybe it would be better for larger dents, but definitely not with door dings.
Nieves Sanchez
2024-12-12 11:12:32
This T Dent Puller is not the same as the picture shows.The actual size is shorter than the picture.The quality is so poor.I will return this T Dent Puller.Very poorly made.
Recommended Products

$20.31

$ 8 .99 $8.99

4.6
Select Option