Your cart is empty.
Your cart is empty.Product Description
What's in the box?
The BACOENG Kegerator conversion kit offers value for your money, as it comes with several quality parts.
Start your DIY kegerator tour!
- 1 × Faucet
- 1 × 4-1/8"Shank
- 1 × Co2 Regulator
- 1 × D System Coupler
- 1 × 5FT Clear & Red Hose
- 4 × Clamp
- 1 × English Manual
- 1 × Wrench
BACOENG Single Faucet Door Mount Kit
Build a small beer bar at home and enjoy the craft beer at any time!
Set up a home or commercial brewing system to serve cold draft beer using the BACOENG Kegerator conversion kit. It includes all necessary tools you need to make your work processed easily and saves you hundreds of dollars. It is ideal for seasoned beer enthusiasts looking for a reliable Kegerator before spending a fortune on a commercial unit, or people who are just starting out.
Instruction Manual includes:
- Concept Introduction
- Installation and Usage
- Co2 Regulator Instructions
- Carbonation and Pouring Tips
- Cleaning Tips
- Safety Precautions
- BACOENG Products Series Introduction
- Troubleshooting
Standard Beer Faucet
- * Featuring a quality exquisite polished brass body
- * Including a standard thread for quick connection to most branded knobs
- * User-friendly spring return handle design
- * Equipped with 4-1/8"(L) × 1"(OD) Long Nipple Shank
Heavy-Duty Dual Gauge Regulator
- This unit weighs about 4 pounds and includes a rubber protective covers.
- It always tell you working pressure and tank pressure with pinpoint accuracy.
- A convenient knob style pressure dial that can be adjusted without tools.
- Shutoff valve with built in spring loaded check valve to prevent beer from flowing backward into the gas lines.
- Pressure Relief Valve Releases at 45PSI to Ensure Safety
D-System Keg Coupler
- Features a sturdy nickel-plated forged brass body with a stainless steel probe
- Designed for use with all domestic brand American D system Sankey kegs.
- The lever-handle design is easy to use - simply grip the handle and then down on the handle to couple the keg.
- A pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg.
ABLinMD
2025-09-06 11:11:42
I purchased this kit a few months ago now., installed into my home keezer.The taps are nice and pour well. Everything is really solid.I have run several kegs through it, and cleans the lines after each keg, and everything is holding up wonderfully.The regulator works great, and having a built in release is really nice.I would definitely purchase another tap set from Bacoeng without hesitation.Would highly recommend this product.
Robert Shull
2025-07-31 18:13:32
Everything you need. Easy installation whether it be a replacement or first-time install, this is what you need.
D. Janson
2025-07-24 15:23:45
Nice quality and very reasonably priced way to get started with a two keg system.REGULATOR is good quality and easily attaches to a CO2 tank. Good advice is to have some thin plumbers teflon tape to put on the threads to be sure there is no leaking. Bad advice would be to use a liquid thread compound, since that can be a mess to clean off properly when gas lines are taken off and put back on, making it more of a challenge to avoid leaks. CO2 is not terribly expensive, but it is not a nice surprise to find a keg at low pressure due to a small leak in a gas line. Have a spray bottle of soapy water handy to spray on new connections and see if bubbles are forming due to a small leak.COUPLERS/DISCONNECTS: Note that if you are home brewing and using "Corny" kegs with ball lock disconnects this is NOT the right kit. But if you are using the kegs most often offered by commercial breweries (sometimes called "Sankey kegs" with "D" couplers) then you are in business. The disconnects for those kegs have both gas and liquid lines on a single coupler/disconnect which goes on and off the keg quickly and easily. If you ARE using corny kegs, then you can set these couplers aside and easily add a ball lock disconnect to the end of the gas and liquid lines instead - with the bonus that you now also have the right coupler if you ever do want to get a keg from a brewery (which we eventually did).Also, FYI some directions have the rotation of this coupler reversed, so just pay a little more attention when you are putting it on a keg and it should be pretty clear which way to rotate it to tighten it down. Only needs about 1/4 turn.FAUCETS: The faucets/taps are decent quality, and could be used on a keezer or kegerator (our approach).GAS AND LIQUID LINES: the lines are good quality, but frankly we prefer a narrower diameter liquid line to moderate the beer flow slightly to avoid pouring at too high a flow with too much head. Also, FYI, since these faucets are not spring loaded you will want to pay attention as you tap a beer and not assume it will shut off on its own when you let go of the handle. This is actually pretty standard, but just be aware.
Marcus Jackson
2025-06-19 12:23:59
Items in kit were awesome but wrench was missing. Emailed customer service and they replied promptly. Compensated me for the wrench which was excellent on their part. As you see, I didn’t go through the door but the wall. All in all great kit!!
Customer
2025-04-26 10:18:10
The regulator gauges are terrible and do not work. The supply pressure came out of the box already reading 10 psi with the backing material bent and not installed correctly. The needle will not move and is stuck. The total tank pressure gauge read at zero and then increased to 800 psi once tank was opened. However, after closing tank and bleeding off pressure, the needle remained at 800 psi. Do not waste your time buying this.
Greg
2025-03-09 10:32:16
They work great!
Murdock M.
2025-02-26 16:37:49
Bought this and installed it with no issues. Product seems like it is if high quality but after about a week of being hooked up it leaked out all of my co2 out of my tank.
kc.bismarck
2025-01-26 16:23:56
The product was delivered promptly. It’s heavy duty with quality flexible hoses. The installation was what I expected. Thank you
José Espinosa
2025-01-16 15:34:42
Viene con todo lo necesario, fue muy fácil de instalar y sin problemas, muy recomendable.
Recommended Products
$199.99
$ 88 .99 $88.99