Your cart is empty.
Your cart is empty.Product Description
Keith
2025-07-28 17:40:11
Good value for the money. I use these for laser projects, so I go through the sheets pretty quickly. I don’t have the ability to go pick up a full sheet of 3mm plywood and cut it into squares so this works perfectly for now. They do come with a slight cup to them, but that’s pretty standard with plywood of this thickness. Definitely a buy!
Zeppfan
2025-07-24 13:38:10
These baltic birch sheets are perfect for use on my laser machine. They arrived flat packed and individually wrapped. They are flat with no warping at all.I'm glad I found this item. I definitely would recommend and I will be ordering more!
Customer
2025-07-14 09:21:30
The best sheets I've bought so far from Amazon!There still are few small issues here and there, but most are great for laser engraving 👌
Omar F.
2025-06-17 12:01:29
I've been buying these type of 3mm ply from other vendors for a while now. This is my first time buying from this vendor. The one thing i loved about these is that these come individually wrapped in plastics wrap. Allowing them to stay as flat as possible. As we all know, a lot of time we buy this material from other vendors these come already wrapped making them super hard to work with. Well, NOT THESE!! These are super flat and ready to be engraved/cut/scored.. Great buy! I will be buying more from this vendor.
Lauren
2025-05-22 19:39:50
I bought this wood for my laser machine, and it never cuts everything all the way through and the wood is so warped even after taking out of plastic wrapping and letting lay flat. Smoothness is ok but not really worth the money for how uneven it cuts. I have wasted too much wood and money due to the uneven cutting
Megan Lundy
2025-04-02 18:44:50
The wood looks really nice, and cuts really well with my (old and kinda weak at this point) laser engraver. Very happy with this wood and will likely buy again.
Zaphod
2025-03-23 10:49:50
The price was good on this plywood, but I cannot recommend it. I would not purchase again. If you place any value on your time, it is not worth it. It is the lowest quality wood I have purchased for my laser. Here is why I would rate this wood at 1 star.1. The plywood was advertised as 1/8" thick, but the wood I received was undersized.2. Many of the sheets have defects running the entire length, some poorly patched, some parts not even patched.3. There are a lot of glue filled voids and even using very generous speed and power settings, I had to do a bunch of exacto knife cutting on the back to free the parts and then you still have a bunch of char on the cut. If you are doing multilayer or mandala, this will be a huge hassle. I've hit bad spots on every piece so far.4. The wood is fairly warped, although some warping is expected on ply this thin.5. Each piece of wood is individually wrapped. Why?6. A few pieces had broken corners.The price was good on this plywood, but I cannot recommend it. I would not purchase again. If you place any value on your time, it is not worth it. It is the lowest quality wood I have purchased for my laser. Here is why I would rate this wood at 1 star.1. The plywood was advertised as 1/8" thick, but the wood I received was undersized.2. Many of the sheets have defects running the entire length, some poorly patched, some parts not even patched.3. There are a lot of glue filled voids and even using very generous speed and power settings, I had to do a bunch of exacto knife cutting on the back to free the parts and then you still have a bunch of char on the cut. If you are doing multilayer or mandala, this will be a huge hassle. I've hit bad spots on every piece so far.4. The wood is fairly warped, although some warping is expected on ply this thin.5. Each piece of wood is individually wrapped. Why?6. A few pieces had broken corners.UPDATE: This ply also chars badly. Look at the picture I uploaded that compares it to a higher quality wood. I made both these cuts at the same settings, one after the other. This not from glue filled voids, every inch of cut material is charred and it's a huge mess to clean up. I will probably toss this stuff as it's just not worth the time to try and clean it up for acceptable results.
Customer
2024-12-21 13:41:09
Ply usually has an A side and a B side. Both sides on this ply are A quality. Very flat, which is great for laser cutting. Three 11x20 sheets processed sor far with no voids or over glue observed. Very clean cuts on P2 using default BB settings. Great value.
Recommended Products
$38.87
$ 20 .99 $20.99