Your cart is empty.
Your cart is empty.Product Description
Handi-mam
2025-09-03 11:09:39
I situated this lightweight, heat-reflector material on the wall behind my toaster oven/air fryer combo where the heat vents are on back right side. I did NOT peel off the entire backing to expose the sticky -- instead I peeled off just a half-inch strip of backing to expose the sticky across the top and the bottom -- and then also added an X-cut-out for the oven plug to come through as well. My electrical outlet is just a fraction to the left of the oven heat vents, but I didn't want the outlet and the wiring behind/inside the outlet to get a constant dose of heat every time I used the oven, so I protected it with a small X-cut flap opening for the electrical plug to fit through. As a pattern guide, I first cut a paper bag the exact size of the reflective material and situated the paper bag on the wall to mark where the plug needed to come through -- this ensured where I needed the X-cut-out for the plug to come through. I then used the paper bag pattern to mark the reflective material and make the X-cut (and recycled the paper bag from there.) I kept the left and right sides open/no sticky used on the sides, so that air could flow and dissipate if there was any heat build-up. I also make sure the cord doesn't rest on the body of the oven when I use it. In my pics, it looks like the cord is touching, but it's just the angle of the pic, the cord isn't touching. These ovens get very hot. It all works well -- there is no heat build up behind the oven/on the wall/on the outlet -- as it reflects the heat away and it then dissipates all around and protects as designed.
Adham
2025-09-01 18:11:53
Came rolled up with no creases. Easy to install. Worked great and stuck to the inside of side plate to protect against hot exhaust muffler on my 2001 Suzuki DR650SE.
sal
2025-07-28 09:28:51
I bought this to keep the direct sunlight off my starlink case. (I don’t have enough room in my service truck to keep it inside) the problem I was having was the case was getting too hot, in fact the satellite was too hot to even touch. I stuck the material, which is very sticky and will form to almost any shape. Now my starlink stays pretty cool even if my truck is under the sun all day
Luke Berglund
2025-06-29 17:34:36
I have a studio monitor speaker setup right next to my radiator. This stuff keeps ALL heat away from my speaker...its perfect. I've had it slapped directly on top of the radiator for the last 2 months without any issue.
Laura
2025-06-05 14:03:36
This adhered well to the ceiling and covered the area nicely around an exhaust vent
Thomas
2025-06-01 10:42:15
This product is ok, but it doesn’t come on a roll like in the picture. That means when you apply it, there will be crease’s. Will be sending back for this reason.
Richard Hunt
2025-05-22 14:47:46
This works good for engine bay locations where radiant heat from exhaust can burn or melt hosed, tubes and wiring harnesses. Anywhere there is radiant heat within a few inches of wires, hoses or even pipes and cables. This doesn't necessarily insulate as much as guards against high heat components that can do damage. Tricky to work with as it in sheet format, sort of like thick shelf paper.
IR Grant
2025-05-11 11:53:04
Easy to use with very good results
Cecilia
2025-04-07 16:06:21
Muy practico llego un poco dañado por el dobles y es un poco difÃcil colocarlo
Client d'
2025-03-08 17:34:38
tu peut pas le déchirée avec tes mains...j ai prit un ciseau.
Charles Duggan
2025-02-20 20:35:09
I used a sheet of this heat shield when building a new chimney for my range, it did the job admirably.
Cliente
2025-02-15 13:03:00
Avendo messo l'inserto che scalda molto di più nel caminetto e non avendo possibilità di spostare il divano che era un po' troppo vicino, ci serviva qualcosa per schermare il calore che arrivava dal camino sul divano. Abbiamo fatto una prova con la carta stagnola e seguendone il principio questo adesivo ci sembrava fare al caso nostro. È PERFETTO! Rimane freddo, non diventa neanche tiepido. E durante le stagioni calde volendo possiamo toglierla senza problemi.Se vi serve qualcosa del genere è l'ideale. Super soddisfatti.
Veronica Luppi
2025-02-09 12:05:59
Tengo la chimenea junto al Sofá y forre el brazo del sofá para evitar que se calentara tanto. Aún ardiendo la chimenea a tope el aislante se mantiene frÃo, aislando completamente al sofá
Recommended Products