Your cart is empty.
Your cart is empty.Product Description
Our fasteners work with many brands of pneumatic tools like Bostitch, DeWALT, Senco, Paslode, Duo-Fast, Hitachi, Makita, Porter Cable and more. If your tool model number is listed below and our fastener fits within the size range of your tool, our fastener will work. We use only high quality collation materials and glues to keep the fasteners together before and during use. Use B&C Eagle fasteners for more positive drives, fewer jams and lasting quality. Please make sure you select the right coating for your application. Bright fasteners should only be used for interior applications in non-treated lumber. Hot Dip Galvanized fasteners are for interior or exterior applications in treated lumber. For the best corrosion protection available, always use Stainless Steel fasteners. Visit our website at www.bandceagle.com or give us a call for more technical information or if you have any questions on our fasteners. ***As of July 1st 2013 we've updated all of our packaging. Buy with confidence that you will receive our product shipped from AMAZON.COM intact. *** These fasteners are ENGINEERED TO FIT: B&C Eagle: SN2283, SN2290, Bosch: SN350-20F, Bostitch: F21PL, N88RH, N88RH-2MCN, N90RHN, N95RHN, RN90, Campbell Hausfeld: NS209000AV, NS219099AV, DeWALT: D51844, D51845, D51850, Duo-Fast: 903000, CN-350B, DF350S, NSP-350F1, NSP-350F2, SNP83, Fasco: F5C RHN 20-90, F5C RHN 20-90A SS, F6 RHN 20-90, Hitachi: NR83A, NR83A2, NR83A2S, NR90AC, NR90AC3, NR90AE, NR90AEPR, NR90GR, Makita: AN8300, AN922, AN923, Max: GS683RH, GS683RH-EX, SN80, SN883RH, SN890RH, SN90, Paslode: 5325 SRH, 5350 SRH-20, Porta-Nails: 660, Porter Cable: FR350, FR350A, FR350B, FR350MAG, Ridgid: R350RHA, Senco: FRAMEPRO 502, FRAMEPRO 600 , FRAMEPRO 602, FRAMEPRO 650FRH, FRAMEPRO 652, FRAMEPRO 700XL FRH, FRAMEPRO 702XP, FRAMEPRO 750XL FRH, FRAMEPRO 752XP, GT90FRH, SN60, SN65, SN65C, SN902XP, Spotnail: NPR90, YPR90, WEN: 61790, 61792, 91232. PLEASE CONSULT YOUR TOOL OWNER'S MANUAL FOR SIZE RANGES. For the most up to date list of tools this fastener is compatible with, please visit our website at www.bandceagle.com
From the Manufacturer
B & C Eagle A3X131/22 Round Head 3-Inch-by-.131-Inch-by-20 to 22-Degree Plastic Collated Smooth Shank Framing Nails. 3 inch x .131 plain shank framing nails with full round head. Fits the following nail guns: Hitachi NR83A, NR83A2, NR83A2S, NR90AC, Duo-Fast CN350, Senco SN60, SN65, Makita AN8300, Porter Cable FR350, FR350MAG; Max SN890RH; Bostitch N88RH, N95RHN; DeWalt D51844, D51845.
Customer
2025-08-29 13:05:13
worked great in my gun
Bill
2025-08-12 13:58:37
Good
James Wilson
2025-07-22 18:54:14
Had very few issues went through a box building a storage building would order again
thomas j heaton
2025-06-14 14:29:02
Good value and quality
C. Owen
2025-05-12 16:11:01
I'm on my second box of 500 as a homeowner doing their own basement finishing. I'm nearly halfway through the second box and I have yet to have a single jam. I'm using a cheap framing nailer, so credit to that and credit to the nail, everything in this process has gone very well so far.
Kenny Honse
2025-05-08 18:24:36
Small box of nails. It's a box the size of one tennis shoe, maybe size 10-1/2. That's why it's so cheap. There's no deception. The description has the weight, length, angle, the exact number of nails.I kinda like the smaller boxes. It's something reasonably light to tote. The nails do as told and wait until needed.It appears all the paper or plastic "vaporizes" as there's nothing left when the nails run out.I'm using the NUMAX 21° framing nailer, and have had no jams.
Gary Breau
2025-05-04 10:52:20
It was good.
Customer
2025-04-26 17:59:32
I've fired about 600 of these with my Numax framing nailer and they have been working perfectly. The nailer stops with three or four left in a row, but if I load up some more behind them, they continue to fire. One jam, not sure why, but other than that, no problems at all. Made a few mistakes of my own and had to back a couple of them out and they were tough to get out, so I'm pretty confident it will take a long time for nail pops to develop. I can recommend these with confidence.
Stephen Burton
2025-04-07 13:27:55
They fit and work, material seems good quality.
Frank
2025-03-12 14:16:56
Couldn’t find any 22° nails in Vancouver, worked well, arrived as promised, liked that had full head. No complaints
online customer
2025-02-28 14:05:03
Satisfactory/Adequate...prompt delivery. Thank you.
Jonathan McKenzie
2025-02-19 14:49:04
Other than the plastic sticking under the heads if the the nails they work great. If ancient Rome had these nails it would never have fallen
Gary
2025-02-18 10:17:04
Don't like the plastic holders.They leave a mess after nailing.
Recommended Products
$54.23
$ 23 .99 $23.99