Your cart is empty.
Your cart is empty.Product Description
Product Description
Pre-glued Beech Edge Banding Backed With Hot Melt Adhesive
Natural Beech Wood Veneer Edge Banding
ebpsneer Beech Wood Veneer Edge Banding is made of natural wood, it is easy to process and durable.
Our wood veneer is pre-glued with top-quality hot melt adhesive that provide a strong bond, it also can be remove and reheat.
The glue is activated by heat and will strongly apply this high-quality veneer edging onto your Shelf, Furniture, Cabinet, plywood, MDF, particle board, OSB board or Other wooden DIY project.
It's easy to use, just apply it to the furniture edging and iron on with a household iron.
Size:W1-1/2" x L 26'(38mm*8m)
Size: W 3/4”×L 50’ (19mm*15m)
Size: W 1/2”×L 50’ (13mm*15m)
Size: W 2”×L 50’ (50mm*15m)
Size: W 7/8”×L 50’ (22mm*15m)
How to Apply for Furniture
Wood edge banding roll can be applied with an iron, hot air blower or it can be applied with an edgebander machine. Trimming and sanding as required after the glue turning dry.
Use a steam iron or dry iron,Do not use steam with water, dry heat is required.
Switch to "Fleece" or similar gear, then hold for about 3 seconds and move forward(Don't press it too long, otherwise it will burn the edges).Before operation, try for a short period to master the method. If the hot melt adhesive does not melt or burns the edges, please adjust the pressing time or gear appropriately.
Simply use household iron, hairdryer with hot wind or edge banding machine to attach. Trimming and sanding as required after the glue turning dry.
Finished Project