Your cart is empty.
Your cart is empty.Product Description
MAPLE REAL WOOD VENEER EDGE BANDING
Maple Veneer Edge Banding
The size of edge banding is suitable for your daily needs. Edge Banding is a strip of wood veneer with heat melt adhesive pre-applied to the back. You simply hold the edge banding in place, then run over it with a heated iron. After cooling, please press it with your hand and trim off the excess sides with the Utility Knife, 0.5 mm thickness can let you easy to do.
High Quality
The edge banding is made of high quality veneer material, which is durable and elastic, with a smooth surface and not easy to be dirty. When you repair laminates and cabinets, veneer edge banding will be your first choice.
Easy to Apply
Maple veneer edge banding is very easy to apply, simply place it on the item and heat it with an ordinary household iron or hair dryer to hold the edge banding in place. If there is an excess edge band, trim it off with a razor blade. Veneer edge banding is rolled very tightly and is easy to hold accurately.
Widely Use
Our design is high quality & fashionable, This edge banding were doing market research which is matching most customer favorites. Veneer edge banding is a thin material used to seal the exposed sides, such as plywood, particle board or MDF, increasing durability and a new look. It can update your desk, cabinet, DIY and the other furniture, the edging will give a smooth and clean surface to it.
Table
Door
Cabinet
Laminate
MAPLE WOOD VENEER EDGE BANDING
PREMIUM A+ QUALITY MAPLE WOOD VENEER
Highest grade veneer quality pre-glued, maple wood veneer edging for repair or enhancing cabinetry, furniture, DIY projects, shelving, crafts and more. Unmar wood veneer sheets with adhesive back. Finely sanded to perfection, this plywood edge banding provides a perfect finish to your projects.
PRE-GLUED HOT MELT ADHESIVE
Pre-glued with top-quality hot melt adhesive, our veneer edge banding is super easy to apply with a household iron. The extra strong hot melt glue is evenly distributed on the veneer edging for a strong, permanent bond.
APPLY ON MANY SURFACES
This roll of iron on edge banding, flexible, thin wood strips were specifically made from all-natural & high-quality walnut wood in combination with pre-glued hot melt adhesive so you can apply to wood, plywood, particle board, hardboard or metal.
Benefits of the Product
- A+ Quality
- Real wood veneer
- Perfect finish
- Pre-glued
- Ready for the application
- Finely sanded
- Perfect match to the plywoods
Csmama
2025-08-15 14:47:43
Used this for the edge of a bench on our hall tree and it looks great. It was easy to do, adhered well, affordable and after staining, you can’t even tell it was done separately. Very pleased with the outcome
Satisfied customer
2025-08-12 18:09:09
Just what I wanted. Made it easy for me to revive a decades-old coffee table for my family room. The whole effect is a huge facelift for what had been a tired space and is now fresh and vibrant. Can’t comment yet on durability. It’s just now finished
The Shark
2025-08-07 14:15:31
Banding did the job. Easy to apply with hot iron and it remains in place.
Ana in Sonoma
2025-07-11 16:53:16
The glue on this band is very good once activated by heat, however the color of the band is pretty red and quite different from our birch veneer. Package was marked birch but I’m wondering if there was a mistake.
Kindle Customer
2025-07-09 18:13:16
Refacing kitchen cabinets. We needed 3/4 inch and finally found it on Amazon, but were sent 5/8 inch. We could have gotten it locally without having to wait 2 days for it to arrive. It did not adhere easily and splintered when trying to trim, resulting in several fingers with splinters needing to be removed.The material purchased locally is just a little thicker, adheres very well, and does not splinter when trimming.
i5ere
2025-06-30 15:35:03
Straight forward installation with an iron. Trim with a razor. It takes a stain very well.
Deven
2025-06-01 17:50:37
I received this today, excited to see. I opened it up and it was better then expected! I couldn't ask for better. The quality is top notch and the thickness is great for my use. Would buy again for sure!
Mike Ed
2025-05-23 15:16:13
The veneer is very thin and the glue melts through the veneer when applying. Also, when trimming with a trimmer, the cut was very jagged and I had to redo a couple of runs. The trimmer had a brand new blade and I even tried my old blade to make sure it wasn’t the blade - it wasn’t. I won’t buy this brand again.
Csmama
2025-05-01 11:50:41
Used this for the edge of a bench on our hall tree and it looks great. It was easy to do, adhered well, affordable and after staining, you can’t even tell it was done separately. Very pleased with the outcome
Satisfied customer
2025-04-30 16:18:52
Just what I wanted. Made it easy for me to revive a decades-old coffee table for my family room. The whole effect is a huge facelift for what had been a tired space and is now fresh and vibrant. Can’t comment yet on durability. It’s just now finished
The Shark
2025-03-29 10:10:06
Banding did the job. Easy to apply with hot iron and it remains in place.
Ana in Sonoma
2025-03-23 16:57:45
The glue on this band is very good once activated by heat, however the color of the band is pretty red and quite different from our birch veneer. Package was marked birch but I’m wondering if there was a mistake.
Kindle Customer
2025-03-14 12:48:36
Refacing kitchen cabinets. We needed 3/4 inch and finally found it on Amazon, but were sent 5/8 inch. We could have gotten it locally without having to wait 2 days for it to arrive. It did not adhere easily and splintered when trying to trim, resulting in several fingers with splinters needing to be removed.The material purchased locally is just a little thicker, adheres very well, and does not splinter when trimming.
i5ere
2025-01-04 12:09:56
Straight forward installation with an iron. Trim with a razor. It takes a stain very well.
Deven
2024-12-31 21:18:07
I received this today, excited to see. I opened it up and it was better then expected! I couldn't ask for better. The quality is top notch and the thickness is great for my use. Would buy again for sure!
Mike Ed
2024-12-30 18:33:21
The veneer is very thin and the glue melts through the veneer when applying. Also, when trimming with a trimmer, the cut was very jagged and I had to redo a couple of runs. The trimmer had a brand new blade and I even tried my old blade to make sure it wasn’t the blade - it wasn’t. I won’t buy this brand again.
Recommended Products