Your cart is empty.
Your cart is empty.Bell Clinch Universal Mount and Cage, Black
Mark
2025-07-29 18:02:27
The Lectric XP doesn’t have an adequate place to mount a cage. This solves the problem. Not sure how it handles heavier water bottles, but it works fine with standard cycling bottles.
Sunny California
2025-07-27 18:05:53
Took others advice and bought this for the mount only. My 26" bmx cruiser didn't come with mounts for a cage and since it's just a cruising bike I wanted a water bottle cage. Took a chance since this had the most positive reviews and don't regret it one bit. Attaches in a few seconds, cut the excess strap off and done! Absolutely no slipping. The rubber mount grabs the seat tube and the 2 straps cinch it down good. I used an Ibera carbon fiber like cage instead. The cage this comes with feels a bit cheap but would work for a leisure ride. I only changed mine because I wanted a carbon fiber look. I'm going to buy a second mount for my other cruiser and possible 2 more for the kids bikes. I recommend this one over the universal mounts that are metal or use screw clamps to cinch them down.
Emmi Hilbish
2025-06-16 15:52:29
I have gone through several different water bottle holders from many different brands and none of them have ever worked well for use on my wheelchair. This is the only one that has stayed tight on my wheelchair without damaging the paint, breaking while installing, or not being adjustable enough. The velcro straps and rubber make the holder stay tight on my wheelchair while still allowing me to rotate it to get out of the way if needed. If the straps ever do become too loose, they are so easy to adjust and fix the issue. I also like the way the holder part wraps around the bottle to keep it secure. This thing is pretty indestructable as well, as it has gotten bumped into and hung up on things many times and is still going strong. I only give it 4 stars because I wish it had a slightly bigger radius. Large styrofoam cups (like 36 oz or larger) will not fit and may be punctured by the arms of the holder part. Also, large plastic cups that have a lot of precipitation from a cold beverage don't work well because the arms can't grip it completely and the precipitation might cause the drink to slip and fall out. Same thing with cups that are mostly empty or lightweight - won't be heavy enough to stay in the holder if you go over a bump. However, I mostly use this for plastic and metal reusable water bottles and 24 oz drinks so it works fine for me. 20 oz hydroflask coffee flask fits perfectly.
Babble
2025-05-21 19:29:41
Used this to fix the deplorable cup holder situation in a Mini Cooper. IYKYK
Evans
2025-05-17 09:50:47
Easy to velcro on. But the bottle cage is lightweight plastic and doesn't grip the bottle firmly. Fine for a vertical mount. Sketch for horizontal mount.
Michael Kelly
2025-04-25 17:57:32
I bought this water bottle holder for my boat. I needed a place to hold a water bottle that was out of the way. I came across this holder and thought I’d give it a try. I was worried that it would not fit on the seat post, as it is wider than a typical bike frame. However, the rubber edge was flexible enough to accommodate it. Additionally, the rubber section makes it so this holder will not slip down with a heavy water bottle. I was able to put a 30 oz. bottle, from Arctic without any issues. If it will work on my boat, it will definitely work on a bike.
ann
2025-04-14 19:31:03
This thing was exactly what I was looking for. Want to mount it on the down tube , seat tube , crotch tube anywhere on the bike it will mount on. The Velcro straps are strong and don't budge while riding. 10/10 product.
Dave Anderson
2025-03-26 12:53:23
Easy to install and works well. The only slight downside is that it has a tendency to slide around a bit, so I need to try to tighten it occasionally by taking it off and pulling the velcro as tight as possible. But good product if your bike doesn't have the holes for the regular bottle cages.
Lindsay Mactaggart
2025-03-24 09:03:39
E-bike .
RAM
2025-03-15 15:42:36
Precio:Económico en relación a otras alternativas y adaptadores. Si no cuentas con los espacios para atornillar el porta agua debe comprar el adaptador y el porta botella.Materiales:Ligeros y muy flexibles, Pensé que era muy frágil, pero ha funcionado muy bien y sin accidentes. Importante comentar que soy ciclista urbano, por lo general no recorro caminos muy accidentados.Uso:El Bell Clinch Universal Mount and Cage, es ideal para las bicicletas que no tienen orificios para atornillar el porta botellas. Tiene una montura de goma y se sujeta con tiras de velcro. Yo lo instale en una Brompton, en el poste del manubrio La probé con una botella de agua de aluminio de aprox 750 ml y queda muy bien. No se mueve ni tengo la sensación de que se va a caer.Muy versátil ya que puedes colocarla en el espacio que sea más práctico, en mi caso por las dimensiones del tubo del cuadro, quedo en el poste del manubrio o también puede quedar en el poste del asiento.
Robert
2025-02-14 20:58:30
Though the bottom part was hard plastic. Its more of a firm rubber so its bendy and as such, slides up and down the bike frame alot and can flip too.Maybe a bit of grip tape will help.Regardless, easy as hell to install, holds every water bottle I've found. Good for any bike that didn't have the holes for a screw on one drilled into it.
Hiram Rangel
2025-01-24 11:32:06
Estoy muy satisfecho con el producto, ahora puedo llevar mi botella de agua. No se mueve ni se cae, queda muy bien sujeto al tubo y sostiene muy bien las botellas de agua.
Eduardo Mendez MartÃnez
2025-01-10 10:29:04
Buena calidad y se ajusta a varios modelos de termos y botellas, ideal para las bicicletas que no cuentan con los orificios para atornillarse, eso si hay que ajustarlos bien o su botella saldra volando
Recommended Products
