Your cart is empty.
Your cart is empty.Torin BIG RED 1 Pack 10cm Large Jack Pad Universal Fit Cross Slotted Frame Rail Protector is made of durable rubber and top design provides more cushion and crush resistance.Dia is 4 3/16 inches and thickness is 1 inch. They are suitable for most floor jack and vehicles.
Sergio
2025-09-05 15:43:44
I have bought others where the angle on the pinch weld is sharper but they always end up getting cut deep. Except this one. Looks like its holding the Audi Q5 those cars feel very heavy to lift. So far it hasn’t dug too deep and holds ok. I might have to report later
Terry G. Moore, Sr.
2025-09-02 12:32:30
The Torin 10 cm Large Jack Pad was to big for the Torin jack stand I use, but I was able to make it work.
JnJ
2025-08-27 12:56:26
Does not deform.
CM
2025-08-23 10:39:18
Appears to be made of a more stress-resistant material than the usual ones packaged with the floor jack. Nice design.
ViRuS
2025-08-20 12:12:25
I bought it and it doesn't fit the jack I've the material are exceptional and very durable. Other brand should use the same material. Good design for exposed chassis. Non slip.
D. Lippert
2025-08-10 10:29:56
I use a hydraulic jack at least a couple of times per year to swap my winter/summer tires and wheels. Pinch welds and their associated jacking points are made for a lift which distributes the weight across both jack points, which you can't do with one jack.So I purchased this to help a little with that, and it does. Great value, too.
DRG
2025-07-31 13:23:06
Cracked and fell apart after 2 uses. Wouldn't think rubber would do this but perhaps it was very old stock or just poorly made. Waste of money.
Balloon Pilot
2025-07-16 18:07:46
Fits my jacks perfectly
Nash Djordjevic
2025-07-10 18:04:22
Purchased to use with the Torin Big Red 3 1/2 ton jack (#CT83502). It definitively works to protect against metal-to-metal contact and prevent scratches on my Jeep while being on the jack (the weight of the car settles the pad right in the cup). The item seems to be well built, strong rubber material and the diameter/thickness are right. One side of the reversible pad does not quite match the shape of the jack's metal cup and, if needed to be used on that side, it will be a bit wobbly/rockery. My assembled product picture is the side that works/fit well, and since my Jeep's frame does not have metal seams, I do not need to use the other side, so it is a perfect fit for my needs....
Alan Z.
2025-07-08 15:43:30
I wouldn’t buy this product. It’s rubbish.
jaciel l.
2025-07-07 10:23:38
Muy bueno y resistente
Ryan
2025-06-17 16:45:46
Fits well on my 3 ton jack even though it isn't the same model number. It does have a tendency to fall out when transporting the jack but stays in place fine when using the jack
Mike
2025-06-11 13:56:35
Una maravilla esta goma para gato patin, lo mejor de todo a precio justo y protege los puntos de contacto de la carrocerÃa.Lo recomiendo ampliamente si te gusta cuidar de tu vehiculo.Lo seguiré comprando en el futuro
Sergio
2025-05-26 15:56:21
I have bought others where the angle on the pinch weld is sharper but they always end up getting cut deep. Except this one. Looks like its holding the Audi Q5 those cars feel very heavy to lift. So far it hasn’t dug too deep and holds ok. I might have to report later
Terry G. Moore, Sr.
2025-05-23 14:10:15
The Torin 10 cm Large Jack Pad was to big for the Torin jack stand I use, but I was able to make it work.
JnJ
2025-05-17 16:05:21
Does not deform.
CM
2025-05-16 14:41:02
Appears to be made of a more stress-resistant material than the usual ones packaged with the floor jack. Nice design.
ViRuS
2025-05-07 16:49:00
I bought it and it doesn't fit the jack I've the material are exceptional and very durable. Other brand should use the same material. Good design for exposed chassis. Non slip.
D. Lippert
2025-04-30 13:17:01
I use a hydraulic jack at least a couple of times per year to swap my winter/summer tires and wheels. Pinch welds and their associated jacking points are made for a lift which distributes the weight across both jack points, which you can't do with one jack.So I purchased this to help a little with that, and it does. Great value, too.
DRG
2025-03-17 16:09:42
Cracked and fell apart after 2 uses. Wouldn't think rubber would do this but perhaps it was very old stock or just poorly made. Waste of money.
Balloon Pilot
2025-03-14 14:34:15
Fits my jacks perfectly
Nash Djordjevic
2025-02-20 16:32:02
Purchased to use with the Torin Big Red 3 1/2 ton jack (#CT83502). It definitively works to protect against metal-to-metal contact and prevent scratches on my Jeep while being on the jack (the weight of the car settles the pad right in the cup). The item seems to be well built, strong rubber material and the diameter/thickness are right. One side of the reversible pad does not quite match the shape of the jack's metal cup and, if needed to be used on that side, it will be a bit wobbly/rockery. My assembled product picture is the side that works/fit well, and since my Jeep's frame does not have metal seams, I do not need to use the other side, so it is a perfect fit for my needs....
Alan Z.
2025-02-07 12:08:49
I wouldn’t buy this product. It’s rubbish.
jaciel l.
2025-02-03 11:19:39
Muy bueno y resistente
Ryan
2025-02-01 17:32:19
Fits well on my 3 ton jack even though it isn't the same model number. It does have a tendency to fall out when transporting the jack but stays in place fine when using the jack
Mike
2025-01-12 12:11:42
Una maravilla esta goma para gato patin, lo mejor de todo a precio justo y protege los puntos de contacto de la carrocerÃa.Lo recomiendo ampliamente si te gusta cuidar de tu vehiculo.Lo seguiré comprando en el futuro
Recommended Products
$36.95
$ 17 .99 $17.99