Your cart is empty.
Your cart is empty.The Torin BIG RED T93007 stubby low-profile hydraulic bottle jack is designed for residential and commercial use. It is industrial welded and engineered using a drop forged alloyed steel construction that is ideal for quality and durability. The inner/outer welded structure and steel construction will keep your bottle jack leak-free and give it an overall stronger build. The fully welded structure is designed for hard-hitting commercial use, making large loads easy to lift. A wide, rugged base adds stability and strength. The lifting range is 9-7/16" to 14-9/16" with a 30 ton (60,000 lb) capacity. It features a high-quality glide-action pressure pump designed to lift with minimal muscle and effort and has an integrated built-in oil-bypass and overload valve that protects the hydraulic system from extending beyond its travel limits. Hydraulics are powered with a high-quality oil, which offers better corrosion resistance and high/low temperature flexibility, allowing the unit to operate at temperatures between 40 degrees Fahrenheit and 105 degrees Fahrenheit. Piston ram utilizes a Y-style polyurethane sealing ring with backup ring, preventing the load from falling slowly. This powerful bottle jack is ideal for lifting cars, trucks, SUVs, farm vehicles, heavy-duty machinery and industrial equipment. It can also be used for military applications, agricultural and industrial environments where the equipment receives heavier abuse. This unit is 100% factory tested for reliability and safety to meet and comply with ASME PASE safety standards. Includes a limited 1 year manufacturer warranty.
Carl Kirkpatrick
2025-07-29 18:43:28
Size is key!! The functionality and jack quality was amazing. Did not have any leakage of hydraulic oil and I use it to fall trees and lift heavy rolls of wire.
justsenditalready
2025-06-27 09:03:05
Fair value, works perfectly, lifted and leveled a house with 2 of these, comparable to harbor freight s jack offerings....would recommend...
David Mc
2025-06-26 12:06:03
The bottle jack performed very well. I was replacing the skirting on a double wide mobile home. When I pulled off the skirting, concrete block supports on the outside had been installed incorrectly and were tilting outwards.I used the bottle jack to lift a 20,000 pound mobile home slightly to adjust the supports. As you might imagine, it took a lot of pumps to get it in position. It lifted the house without problem. I could hear the house creaking as I lifted it 1/4 to 1/2 inch above the starting position. Once it settled it back, everything was hunky dory.I can heartily recommend this product.
videophile
2025-06-09 12:55:13
Works very difficult going up and down out of the box. I used hydraulic fluid on the ram and it will fall with hand pressure now after taking it up about three times to work the fluid into the seals. Took all six pins out from the pump handle mechanism and greased all the friction areas and the pins themself. Now it pumps up with very little effort even just using my finger without the lever as long as there's no load. I have to try it with a heavy load but it doesn't even feel like the same pump that just arrived.
Jeremy
2025-06-02 20:15:21
I needed a road jack for my 6 wheeler. this did the trick for a fraction of the price.It has held up very well and i can not complain. heck i even bought the air option of this.
Ryan
2025-03-31 18:40:39
I needed this to lift a wall in a kitchen to add supports. The first time I used it It took alot of cranking to get it going but once It started going it lifted the wall with no difficulty at all, in fact I barely noticed much of a difference in resistance when cranking. However I went to use it the second time and just couldn't get it started, after inspection I noticed the little metal ball bearing that is supposed to be in the side of the jack was on the ground by where i lifted the wall the first time and can only surmise that when I released the pressure on the jack it came out. I filled the jack with hydraulic fluid thinking it may have been low. I reinstalled the bearing into the grommet. Unfortunately it still would not lift anymore. If this functioned like it did the first time I would have given 4 or 5 stars.
Dan
2025-03-20 17:25:58
This thing is 100,000lbs of go up. I used it with some chains and timbers to jack some large roots out of the ground after a tree removal and sub-par work from the stump grinder contactor. Was able to get them above grade to attack them with a large sawz-all. Probably could have gotten away with 20 or 30 ton. But what the heck. It is a beast. It's heavy but not much it won't lift.
cdavis
2025-03-15 17:05:35
Awesome jack, I wanted something that could life my triple axle boat when a tire failed. Turns out this could lift the boat, truck, trailer, neighbors semi and half the road. It’s a little smaller than a 5 gallon bucket.
JB
2025-02-11 12:21:41
I would like to know if the screwed head can unscrew to reach higher. It seems tuck in paintI tried hard to unscrew but nothing works
Peggy Murphy
2025-01-27 16:24:48
this one jack was used to lift an addition to level it. it was amazing! however i wish they had a better release mechanism to lower the jack after use. i had to use a hammer to lower enough to get it out from under the beam once it was supported properly. but i would certainly recommend this for heavy duty jobs.
Customer
2025-01-25 16:13:01
Not worth the money and when you try to email them to ask about warranty the email comes back because their email is apparently full. Used it once and when we wanted to use it a second time, the seals were gone and it will not hold pressure. Complete waste of money with no support.
Réjean Chénier
2024-12-23 10:30:22
Les trois barres de leviers comme la photo d'achat, n'était pas dans la boîte Impossible de pouvoir ce servir du cric et emballage médiocre. Je voudrais bien mes trois barres de leviers.Merci
Celine B
2024-11-19 09:19:59
Il fonctionne bien
Recommended Products
