Your cart is empty.
Your cart is empty.Product Description
High Capacity & Sturdy Rod and Spring
SPECSTAR Air Hydraulic Bottle Jack
Pneumatic vertical jack can easily handle lift operations under 20 tons. ldeal for various maintenance of automobiles, agricultural vehicles, heavy trucks, mobile machinery. and heavy equipment
David W.
August 10, 2025
I purchased this jack to specifically replace the 20 ton bottle jack on my Harbor Freight 20 Ton hydraulic press. In terms of the jack and the functionality, it works well. It is a bit taller than the original jack, so installing it with the springs on the press did take some doing. I removed one of the springs after loosening up the carriage bolts as much as possible, and then allowed the press carriage to drop on one side. From there, I removed the old jack and installed the new one, and then used a toe jack to raise the carriage back to level and then a bit more than level so that I could reinstall the spring I disconnected.I then replaced the OEM hose with a longer 6' Goodyear hose, connected it to a 2-way pneumatic pedal, and installed a 3' Goodyear hose with a quick connect. I also moved the origional air control valve from the old hose to the new one and installd a quick coupler on the pedal. I did this so that I could use the jack with the pedal or disconnect it from the pedal and use it like it was originally designed. It works perfectly in this configuration, since the origional control valve has a bail to hold the valve open which I use when connected to the pedal.The only dings I'd give the jack is the condition in which it arrived. The bail on the control valve had been ripped out during shipping, so I had to put that back together as best I could. Also the jack showed a lot of signs of paint chipping. Make no mistake, this is not a fancy jack. Additionally, the handle it comes with is of poor quality IMO. The handle that came with the press was far better. Anyhow, for my needs, it does what I wanted. For that, I'm giving it 5 stars. If I was just using it as it came as a normal jack, i'd probably rate it 3.5-4 stars, since I'd have to use that less than ideal jack handle.
jerrell
July 24, 2025
at my age, having this to jack up my F250 Super Duty has been a blessing and well worth the funds
David Lee
July 17, 2025
My 20-ton shop press came with a manual hydraulic jack which took forever to pump up by hand pushing up and down. I have a 30-gallon air compressor connected to this 20-ton air jack and it jacks up really fast. It saved me a lot of time and effort. I didn't have to do anything as it was just ready to be used out of the box. It is extremely heavy for 1 person. I am 215 lbs powerlifter and had to get an extra set of hand to help to install on my shop press because the springs to hold it down was extremely difficult. This air jack is heavy! Not for the faint of heart.
Customer
May 26, 2025
Bled as instructions stated. Very slow to raise 16.5 thousand pounds. Ended up using hand pump which operates fine. Then pump saved while in support. Bled again and now will not raise with compressor. Hand pump still works. Will begin return.
Ann
April 11, 2025
Excelente
michael d.
February 14, 2025
The jack worked and seemed just like every other 20 ton jack with a air compressor connection. Unfortunately it was damaged in shipping. Overall I appreciate how it all played out and I’m sure these jacks are good quality if not damaged in shipping.
Satisfecha con la entrega
January 15, 2025
Tremenda calida me encantó
marcy walker
December 7, 2024
This is a great gift because my husband likes it and he said it works well and is worth the money. We recommend this product.
Recommended Products