Your cart is empty.
Your cart is empty.Product Description
Pandas Love Bamboo
BIQU & BIGTREETECH is now developing an increasingly rich product line serving the Bambulab printers aftermarket, which includes Panda Touch screen, Panda Revo hotend, Panda Jet cooling fan duct, Panda Lux LED light bar, Panda Build Plates, Panda Hub USB expander and Panda Fur protective wrap. More are coming, stay tuned!
BIQU CryoGrip Panda Build Plate
For Bambu-Lab P1/X1 Series & A1 Printers
- Cold Printing: Different from traditional PEI build plate, BIQU Cryogrip Panda Build Plate enables you to directly print at low temperature to save energy and prevent clogs caused by extruder overheating.
- Unmatched Adhesion: CryoGrip Build Plate performs well in model adsorption at low printing temp. with its superior first-layer adhesion. No glue or hairspray needed!
- Compatible Filaments: PLA and PETG suggested. ABS and TPU filament are NOT recommended.
- Recomended Printing Temp. for PLA: 30-50℃
- Recomended Printing Temp. for PETG: 50-70°C
Zero Heat
The CryoGrip build plate effectively prevents clogs caused by extruder overheating, eliminating extruder maintenance.
Energy Saving
Cold print technology helps you to save almost half of the energy compared with traditional build plates.
Easy to Clean
Use only water to clean the surface of Cryogrip Panda Build Plate instead of detergent or solvents.
...bill
2025-09-04 18:09:59
Using on an A1. Both sides stick great with no additional goop. Really like to smooth finish.Printed 15 or so prints thus far...
Gabe
2025-08-19 15:16:01
This build plate is by far my favorite has an awesome finish on the smooth side and sticks awesome. I wipe down with iso alcohol after every print and sticks every time.
O. Esquivel
2025-08-08 14:54:45
I was a bit skeptical about a low temp plate for 3D printing, but I decided to give it a try and I'm amazed by the results.The plate is of great quality. I bit more textured than a normal PEI, but prints hold really well and the low temperature it needs to stick makes it more resilient to sudden temperature changes from the environment, specially when the printer doesn't have an enclosure.I've used it with PLA filaments and a plate temp of 40-50 Celsius and haven't experienced any wrapping of detachment from prints, like it happens when working with other plates at higher temperatures.Totally compatible with Bambulab A1 printers and the plate is of great quality. Totally recommend the purchase
T D
2025-08-01 13:08:01
The textured side is perfect, it's an affordable alternative to buying a spare Bambu brand sheet. I've had virtually perfect bed adhesion with every print on the texture side.The smooth side doesn't have quite as much "stick" as the Bambu brand smooth plate, but it still does the job; glue stick or brims are your friend with small parts.Otherwise, the print adhesion surface looks great on both, just as expected!
J C.
2025-05-26 10:02:45
I love my panda build plate. Great adhesion and easy removal. I have had it for about a month and after printing almost every day it still works great and i haven’t used the second side yet. I clean it with a damp micro fiber towel once a week. No soap or alcohol like the instructions say. Bed temp 35 celsius.
Ragin_Chankla
2025-05-15 10:00:17
I really liked this bed in the beginning. ABS, PLA+, PLA Wood, etc. stuck to it nicely. As soon as I printed PETG to calibrate flow with a print bed of 70c, the lines started coming up like other reviews stated. My ABS has a print bed of 100c so it’s not a heat issue. Either it’s a wear over time or these beds don’t like PETG. I thought I lucked out and got a good plate but that wasn’t the case. Giving it 1 star because the bottom of prints are ruined. Yes, you could paint them but why do that when the plate lines shouldn’t be coming off in the first place? Manufacturer should just remove the lines. It’ll fix the issue, save your materials and keep the great plate adhesion.
Derrickcassel
2025-05-08 12:39:12
Good adhesion but the white lines transferred to my print.
J. W.
2025-03-23 12:07:32
I recently got the CryoGrip cold print plate, and it's incredible! The adhesion is outstanding—everything sticks so well to this plate. In fact, I have to be extra cautious when removing smaller parts with supports because the grip is so strong it could pull pieces off if I'm not careful. The smaller brims can be tricky to remove because of how tightly they adhere, but that's a small trade-off for such excellent performance. I haven't tried PETG yet, but if it works as well as PLA does, I'm confident it will be just as impressive.
Asga
2024-12-25 18:37:18
Die beste Bauplatte super halt PLA/PETG
Recommended Products