Your cart is empty.
Your cart is empty.Founded in 2003, BLOX Racing is a relative newcomer to the import and sport compact aftermarket. However, in its short time it has quickly established a foothold in the marketplace and developed a reputation as a high quality aftermarket parts manufacturer.
Robert m
August 23, 2025
I used these one a custom set up(sort of) i used these in my 2001 Lexus IS300 with an aftermarket frint sway bar. These were a full inch shorter then my factory ones which were perfect since that was what i wanted, took care of the popping sound my bad ones gave me and these have a very nice feel to them after install, the end links are very nicely built. Just make sure you have the right length bolts for your application if not a local hardware store will carry what you need.
Gman
August 18, 2025
I installed Agency machined billet, adjustable rear, lower control arms on my 2011 GR chassis Subaru Impreza STi. Links that would work on these rear arms were from $145 for Whiteline's (which I have on the front) to $185 for Agency's adjustable ones. These will work on the front anti-sway bar, as is. If, like me, you have the Agency arms you will need an additional spacer for each lower (bolt through), connection if you want it to be centered*. Otherwise it should work on most arms, as is.Grease fitting on one end only? Strange... It is not a common grease fitting either. These work fine but have an audible click on low speed bumps as they are metal on metal. I use them for racing application and they seem fine so far. I have asked Blox to come out with Subaru specific kit for the GR rear that will contain the right spacers and a longer bolt, though you can use the stock bolt.* It can be bolted to one side, using the Blox hardware, but I think the geometry is better if it is centered in the opening.
Stephen
July 21, 2025
Great product for a great price w/ fast shipping! Works very well on my 00 Integra GSR Sedan w/ the wheel setup. Feels high quality and allowed proper camber needed.
Jose
May 30, 2025
Good quality for the price, Got this just for the spacers but just ended up using the whole kit instead.
Damon C. Campbell
February 17, 2025
I have this installed in my honda for about 2 months of highway driving before a clunk appeared and one of the links was noticeably freed up. The hardware seemed soft, but usable, but overall did not have the longevity I was hoping for.
Marco A, Flores
February 12, 2025
i install them on BWR LCA in a civic hatchback 98, but i had to replace 2 bolts, the hardware included is SAE, and i need metric for the LCA, they look strong, and clean
emmanuel
January 18, 2025
great quality.Running them on my 95 civic coupe.
Jesse Smith
December 27, 2024
These are pretty cheap and used universally for quite a few applications. They work well, but won't hold up in the long term if you drive a lot of miles in a harsh riding lowered vehicle like many of us who use these as a universal shorter end link. It is the best option available as far as I know though
Recommended Products
