Your cart is empty.
Your cart is empty.Bora Knows How Important It Is To Rigidly Clamp Down Your Case Goods And Other Woodworking Projects. Rock-Solid Stability Means More Precise Work. Our Parallel Jaw Clamp Is The Woodworking Clamp That Both Enthusiasts And Professionals Reach For. With The Perfect Amount Of Pressure 1, 100 Lbs (500 Kg), A 3 ½” (89 Mm) Throat With A Padded Jaw, And Sizes That Range From 12” To 50”, It Becomes An Extremely Versatile Tool For Your Clamping Needs. Add In The Little Extras That Make All Bora Products Stand Out – In This Case, A Passive Lock Bottom Jaw, And Large, Easy-Grip Handle. Get One (Or Several) For Your Shop Today.
Tom Vernarsky
2025-09-03 15:05:40
Bought the 50" clamps along with the 31" clamps and they are great. The bar is strong enough to be able to give enough pressure without flexing. Highly recommend them.
CAC
2025-08-25 12:56:40
Sturdy, useful clamps. They pull the wood snug for gluing large pieces together. Super helpful.
Kindle Customer
2025-07-26 17:47:19
Will buy more
C. Carter
2025-07-24 13:57:26
I bought 4 of these Bora 50" clamps and have also had access to the similar Bessey clamp. As far as I can tell, all significant specs of these 2 brands are the same. Bar thickness and width measure the same. Materials seem very similar. These Boras actually provide better designed set-off spacers and they come with 3 rather than just 2, as that come with the Besseys. The clamping and operation methods are the same with both brands. I think the thing that really impresses me about the Boras is that they are assembled with bolts and nuts, rather than the permanent brad-like fasteners that are in the Besseys. To me, this means that the Boras are made to be able to be repaired/replaced and that is very significant to me. I like stuff that can be fixed, if or when needed. One more significant detail is that the Boras are much better priced than the Besseys. I know Bessey has the name, but for me, these are superior clamps in every way. Now, I admit I've only had them a short time and am in the middle of a major furniture project where I will use them. Time will tell if they are as good in the long run. If they fail, I'll be back to amend this. For now, I rate them as high as I can.
Dennis
2025-07-17 13:32:35
These are nice clamps but if you are intending to mix them with Bessy clamps - they are not the same specs (as one reviewer claims). Their supporting bar is about 1/8 inch lower when placed next to a Bessy clamp so if you want all the bars at the same height, you will have to shim the ends of the clamps to make up this difference. This may or may not be a big deal to the user, but for me I wished I spent the extra dollars and stayed with a single brand - one I already had in use. Of course, if you already have all Bora, then this is not an issue.
anthony
2025-06-16 10:20:12
I have the 50" clamps but what I'm actually talking about here is an incident with the 24" clamps. In building my clamp cache I've bought these clamps when I catch them for a good price so I didn't necessarily use them when I got them, just threw them on the clamp rack until I needed them. At some point I discovered one of my 24" did not work properly because it would not produce clamping pressure. I discovered this during a glue up so I just grabbed another one and proceeded. Then forgot about it, and it just sat on the rack. By the time I thought about it again several months had passed. Knowing it was too late for a return I went to Bora's website to see if there were any diagrams or parts available so I could repair or rebuild it (pandemic spare time activity). Didn't see any so I got on a chat with their customer service and explained what I was looking for. They said I should probably send it back to Amazon but I told them it was too late for that, and any warranty was out as well. They were really nice about it expressed remorse and sent me a replacement. All I wanted was instructions or parts and they sent me an entire replacement clamp. Now these are the only parallel clamps I buy, but I do check them as soon as I get them.
WG Carlough Woodworking
2025-05-29 17:18:13
Bora clamps have become my go to clamp in most situations. The longer jaw really help spread pressure and stays parallel.
James W Anthony, Jr
2025-05-28 17:53:16
These clamps are big and heavy but they get the job done very well. A bit awkward due to their size but they are "beasts" when you need to get a large project clamped up. They do the job!
Cliente de
2025-03-03 16:29:03
Una prensa venÃa atorada; nada, sólo desarmar, reacomodar y listo corre con gran desempeño. Posible error de ensamble en planta. Buena relación precio - calidad.
Des
2025-02-23 18:14:24
Bought for the great price. I have used it for a few project and it served the purpose holding up the wood well gluing the joints. Since this is my first 50†parallel clamp, I can’t compare to other more expensive models. Overall it does the job as intended.
Don Troughton
2025-02-12 18:53:45
Arrived fastA little trouble opening the clampUsed a screw driver
Joelle LeGresley
2024-11-29 14:40:44
Produit conforme à la description
Kirk Fisler
2024-11-17 11:53:53
Great clamps, very big!
Recommended Products
