Your cart is empty.
Your cart is empty.This is an O.E.M. Authorized part. Fits various Broan models. OEM part number s97012026. The country of origin of this product is united states.
Bubbles From Below
September 3, 2025
Replaced the fan assembly that appears to have been in the ceiling since the Jurrasic Period. That old assembly said "Patent Pending" whereas the new one says "US and Foreign Patents", so that gives you an idea how old the orginal was. Even with this age difference, the new assembly was an exact fit, dropped right in (it has two small tabs that fit into slots in the housing and you just push up the other side until the tab on that side pops into its slot) and worked great. I measured the unit at about 7 1/8" aby 7 1/4", and in comparing it to the original, side-by-side, it was a dimensional match. That actual fan sound is louder, at 3.2 sones, than the original one, which states 2.0 sones on the plate. But the old one sounded like an aircraft on takeoff that was about to lose fan blades, as it had not aged gracefully. Even so, the louder sound is fine, and gives users of the bathroom extra "privacy" in that bathroon which is off the living room hallway. Considered buying just the motor/fan but opted to get the whole unit. Glad I did; it's more expensive this way, but simple to install. Recommend the unit.
DJ
August 31, 2025
This part is an exact replacement for our bathroom exhaust fan. You must confirm this before purchase since there are many exhaust fan designs and styles. We confirmed part numbers and through pulling our old exhaust fan out and comparing photos of new fan.Our old exhaust fan was 20 years old -- slowing down and beginning to sound like a jet engine. This replacement looks exactly the same and has all the right fittings and electronics in the correct locations to slide into the existing bracket. Because it has a corded plug like a normal appliance, attaching to power was easy.5-stars to the company which produces this and 5-stars because it fits perfect, is quiet, and works as new!
SGCSmith6612
August 29, 2025
This is the exact part I needed to replace a bathroom fan vent that was rusting out, and had failed after 23 years of use. Fits like a glove. Installation was a breeze, taking less than two minutes, and the fan is back up and running with nothing more than a step ladder and a flathead screwdriver.The new fan/motor design does increase the noise level over my original fan. There is a distinct high pitched hum produced, likely due to the new (cheaper) fan shroud design. With that said, it seems to move about the same amount of air, and it spins in a stable manner.Installation is simple. Make sure the switch to the fan is off, or turn power off to the bathroom. Unplug the fan motor from the NEMA receptacle (like a lamp). Press against the housing where the center tab is to disengage it. You may need to push up slightly on the fan to help free it, and also use a flathead screwdriver to assist with leveraging the fan housing out a bit. Once the tab disengages, grip the fan and pull it out of the housing. Check the fan's damper once the motor and fan are removed to ensure it continues to open and close freely, and it isn't broken. Installation is performed in reverse. Use the flathead screwdriver to assist with engaging the locking tabs, just in case your fan housing is a bit tight.As a pro tip: If you happen to get fingerprints or smudges on your ceiling, a Mr. Clean Magic Eraser will do wonders to clean your ceiling. I'd recommend having one handy to help clean up afterwards.
Ken
June 25, 2025
Pulled the old insert/motor out, popped this one in and done! Easy fix. Would have been several hundred dollars to pay to fix it and can easily be done on your own.
nomoretpc
May 23, 2025
This was purchased to replace a fan that was 20 years old. Great fit but it is louder than the more expensive fans. The replacement was easy but the fan is louder than I like, but still quieter than the old one. What can a person expect for $30 instead of spending $150 for a quieter one.
Da Bubs
May 10, 2025
Have had this running for several months. The original fan in the bathroom finally had its last spin and needed to be replaced. Trying my mediocre DIY skills with installing this was a piece of cake. Does a great job so far and will buy again if the fans in the other bathrooms burn out.
lapismo
May 4, 2025
There is other same size Bathroom Vent Exhaust Fan Motor and Frame assembly. But little different and it may not work.You should take your Fan Motor and Frame assembly out and see the power cable connector location and holes shapes and location on the metal frame to find out if it’s same or not before you order it. I went to Hone Depot and they have very similar but little different and doesn’t work with mine. But this one fits and works perfectly.
front ranger
May 2, 2025
I pulled out the old fan which was over 20 years old, looked up the model number and this replacement was the first to come up. I was able to install it in just a few minutes. Everything fit perfectly and it operates without any problems. It does have a bit more power to it than the old one, but it's a welcome change!
Mircea Ivan
April 5, 2025
Part was OK although there were fitting issues ( the installed housing was marked wrong , so I ordered a smaller fan plate , with a little bending I got it snug )
Ricky P.
January 24, 2025
Just the size is not fit
Recommended Products
