Your cart is empty.
Your cart is empty.Product Description
-
High Quality 304 Stainless Steel
Corrosion resistance, rustproof, wear resistance
-
-
Can be installed on wooden beams and concrete walls.
304ss screws and expansion bolts are included
-
2 x sturdy locking snap hooks
offer a safety swing
EastAuroraGuy
2025-07-14 13:35:57
Used for a porch swing. These things would hold up a cow. Super quiet initially but a small amount of squeaking began to develop after about 3 months. Nothing compared to the noise from the old hangers. Of course they were almost 100 years old and worn through. Easy to install if you bought the proper hardware. Seems for the price some lag bolts should have been included.
David Steele
2025-07-11 14:53:44
The way the rafters run the indoor swing I got for my son was going the wrong way and wearing out the metal connections. This ball bearing swing connector goes the other direction that I needed. It is strong and sturdy, smooth moving and quality product.The one I purchased, even came with lag bolts and casing bolts
Joe F.
2025-06-14 15:49:17
Used these to hang a two person swing on the front porch. Located a joist above where we wanted the swing, marked the location of the pilot holes, and drilled them. I then tried to drive the lag bolt with my 20v nut driver, and it bound up. I should have taken the bolt and eye off first. I spent half a day getting a replacement lag screw and bolt. After a foolish mistake, I got the hanger up, installed the swing and now life is good. The stainless-steel hanger looks good, and the bearings make it work great with no squeaking metal on metal.
aaron nord
2025-06-01 12:32:14
The media could not be loaded.
RJS
2025-03-09 17:42:08
Part is well made and works great with our porch swing.
James N.
2025-02-04 18:16:14
Bought these to hang two porch swings. I prefer to overbuild things, these are robust. The swivel has dual ball bearings, can’t beat that. My only complaint is the boot they ride on is threaded all the way, the bearings will ride on threads. The main shaft bolt should be solid, with a smooth shank where the bearings ride. I decided to still use them, just broke them down and greased them inside and out. Quiet, no noise, still recommend.
Stephen Lowman
2025-01-31 16:47:50
These are well made ,you can stop worrying if the swing is going to break. And they are very quiet, no noise makes them even better
Dustin
2024-12-23 18:27:20
All parts came with it and was able to put up a swing very quickly.
AGUSTIN SANCHEZ RODRIGUEZ
2024-12-20 12:55:29
Si los instalas bien, no hacen ningun ruido al mecerse, no me gusto que no trae tornillos ni taquetes y se me hace algo caro...
Recommended Products