Shopping Cart

Your cart is empty.

Your cart is empty.

BVV 16' Vacuum Chamber Digital Heat Pad

4.9 (3) Write Review
Free shipping on orders over $29.99

$180.00

$ 81 .99 $81.99

In Stock
  • Instructions on how to operate and set parameters.
  • Simple standoff bumpers (provide thermal separation between the vessel and the work surface)
  • Thermal tape (best method to check and verify temperature)
  • UL Listed Fahrenheit Digital Controller.
  • Min Temp: Ambient + 5


Product Description

BVV Logo

16" Vacuum Chamber Digital Heat Pad

This heater is super accurate, and will hold a temp within a degree (depending on the environment and air movement) The heater includes full instructions to operate it and make PID controller changes. You can leave this heater on for months without any off time.The pad comes with thermal tape, this will be used with a thermal laser gun to shoot the temps. If you have a thermocouple that would be the best method to check and verify temps. The controller has a temperature offset that will need to be found to set the controller accurately. Anything you attach a heat pad to will act like a heat sink. So the set temperature will be different from the actual inside temperature. However, our instructions tell you and provide the thermal labels to accurately find the offset and program the difference in. For example: If you set the chamber to 110°F the actual temp on the bottom surface inside the chamber will read about 101°F on the thermal label. (don't move the gun around, thermal labels reflect lasers too) Since the inside is reading 101°F and the controller is set to 110°F your offset is 9°F, so Add 9° to the 110°F setting (119░F) and you will achieve your 110°F on the inside surface of the chamber.

DHP16

Please Read Before You Buy!

  • Chamber NOT Included, Sold Separately.
  • Heat Pad must fit correct size of the chamber!
  • Fits a 10 Gallon and 1.6GL flat Chamber

This Fahrenheit Heat Pad will adhere to the bottom of the chamber with a peel and stick backing, It will come with simple standoff bumpers that will provide thermal separation from the work surface. The bumpers do not stick well to silicone but get the job done.

UL Listed: UL Listed Fahrenheit Digital Controller
Min Temp: Ambient + 5
Max Temp: 160°F
Voltage: 110VAC Only
Power Consumption: 234-watt
Digital Control: Increments of 1 Degree
Accuracy: +/- 0.2 Degrees
Units: Degrees Fahrenheit
Instructions: Fully included
Relay Lifespan: Approx. 10 million cycles
User can reprogram: Yes

Jordan
August 16, 2025
I needed a 16" heating pad for a custom built vacuum chamber, and picked this one up. Pleasantly surprised by how fast it heats up and just the general quality of the item, quickly bringing my atypically large chamber to 140F (it can go higher).
pbech
March 26, 2025
Product arrived on time and is exactly what we expected as we use it.
Jason B.
December 7, 2024
Good piece of hardware, accurate and fast. This is my second one. First one ran non stop for 2 years
Recommended Products
9 Gallon Tempered Glass Vacuum Chamber with Two Rubber Seals, 33L Degassing Chamber Kit with 5 CFM 1/3HP Single Stage Vacuum Pump Without Oil, Perfect for Stabilizing Wood

$259.99

$ 99 .00 $99.00

4.7
Select Option
PB Motor Tech 5 Gallon Vacuum Chamber Kit with 4.5 CFM Vacuum Pump, Tempered Glass Lid Vacuum Chamber and 38 Micron Chamber Set, No Oil Included, Perfect for Wood Stabilization

$149.99

$ 73 .99 $73.99

5.0
Select Option
BACOENG 2 Quart Vacuum Chamber with Pump, Stainless Steel Degassing Chamber Kit for Resin, Silicone and Epoxies

$104.99

$ 46 .99 $46.99

4.6
Select Option
BVV 3 Gallon Stainless Steel Resin Trap Vacuum Chamber

$158.00

$ 73 .99 $73.99

4.7
Select Option
Bestauto 2 Gal Vacuum Chamber, 5 CFM 1-Stage Vacuum Pump, Copper Motor-Stable Operation, Acrylic Lid, Ideal for Epoxy Resin Degassing, Vacuum Packing

$148.99

$ 69 .99 $69.99

4.8
Select Option
9 Gallon Vacuum Chamber with Two Rubber Seals, Tempered Glass Lid Stainless Steel Degassing Chamber, for Resin Casting, Degassing Silicones and Essential Oils, Perfect for Stabilizing Wood

$204.99

$ 91 .99 $91.99

4.6
Select Option
QiiMii Stainless Steel 304 Vacuum Chamber Tube, Open Blast Extractor, 45 Gram (Tube Length 6')

$61.99

$ 28 .99 $28.99

4.6
Select Option
Orion Motor Tech 3 Gal Vacuum Chamber with Pump Kit, 3.5 cfm Vacuum Pump and Chamber Kit with Tempered Glass Lid 5 ft Hose, Vacuum Degassing Chamber Kit for Stabilizing Wood Degassing Silicone Resin

$129.99

$ 57 .99 $57.99

4.7
Select Option