Your cart is empty.
Your cart is empty.Product Description
Pro Audio Arrangement
The Cable Matters Banana Jack Binding Post Wall Plate for 1 Speaker provides a simple way to connect speakers across the room or down the wall. Conceal speaker wire in the wall instead of fastening it to the baseboard for a secure and professional-looking installation. Connect with 12 to 18 AWG bare speaker wire, banana plugs, or spade connectors. The two-piece wall plate with insert is easy to install with the matching mounting screws.
Sturdy Construction in a Cost-Effective 2-Pack
These sturdy wall plates are built to last. This convenient 2-Pack connects 2 speakers.
Important Notes
- Some models of banana plug connectors may not fit when used on both sides due to the length of the terminals
- These wall plates are not interchangeable with a Decora wall plate
Screw-Type Binding Post
- Accepts banana plugs, spade connectors, or bare speaker wire
- Connect a banana plug on one side only
- Use 12-18 AWG wire on the other side
Installation Tips
- Connect the speaker wire to the rear of the binding posts in the insert
- Fasten the insert to the wall plate with the shorter screws
- Attach the assembled wall plate to the wall bracket
- Connect the speaker wire or banana plugs to the front
Package Contents
- 2x Banana Jack Binding Post Inserts
- 2x Single-Gang Wall Plates
- 8x Mounting Screws
Fountain-head
2025-09-01 15:39:57
I pre-wired my home addition with Canare 4s11 speaker cable, which is a 4 conductor 14AWG cable. I was able to pair-up two reds and two whites and feed through the rear terminals … tighten them down (no bare wires touching) with no issues. And install in a conventional plastic duplex outlet box (modified for speaker cables). The construction is sturdy enough to receive a couple different type banana plugs (sorry, my homemade speaker cables were made up from the only hardware I had laying around) . The coil sleeve type (Viablue) and the expanding pin type both fit snugly and the sound is superb.My only complaint is the Phillips/blade combo screw to the cover plate doesn’t match my standard Leviton plates … I know, I know … First World problems. But it bugs me … and yeah, it would have been nice if the white plastic matched the Leviton white. Oh well … I’ll get over it.
Dennis Bell
2025-08-26 10:11:36
Bought these so I could conceal the wiring for surround speakers and they're perfect! The connectors seem to be very solid and allow quick disconnect of the speakers from the wall. I used standard electrical boxes to mount them which provided plenty of space behind the plate for the wiring. I used 12 gauge speaker wiring to minimize the loss for a long run and these plates worked fine for that size wiring. I recommend these if you are looking to run in-wall speaker wiring.
J. H.
2025-08-16 18:06:44
This made connecting my speakers so clean and easy. My cables are in the wall so a double gang junction box did the job!
Customer
2025-07-07 10:19:36
These work as intended, and were easy to instalThey match up size with with regular outlet boxes.The screws are super cheap, I replaced them.Overall I’d give them 5 stars but that they just feel cheap, like cheap plastic covers. However I can’t fault them much when they did cost much less than the ones in store
John C. Garcia
2025-06-26 16:30:48
Did the job!
Prrbaldwin
2025-06-21 17:26:33
What a great finish to my Stereo system! The gold plated connectors all were tight and the banana plugs fit tight. The double screws on the banana plugs were a nice hard brass and did not distort while tightening with a screwdriver. 16ga wire fit perfect. Highly recommended!
J. Pagan
2025-06-17 18:06:27
well my old wall plate was supposed to be white. but the previous home owners smoke, so it was stained in yellow. setup was easy and somehow i still mixed 2 lines. whished there was a label section in the front. Its one of those things of set it and forget it things.
Robert E. Hoffman
2025-05-10 14:09:59
I bought these for my home theater and the only complaint is the color. Bannana wall outlets for some reason only come in white. They work as advertised.
Cliente de
2025-04-26 17:02:41
También muy bueno para mà sistema de sonido
Jason Mawakeesick
2025-04-13 11:45:18
Looks a lot cleaner now
Me
2025-03-12 11:31:45
Worked well even with 10 gauge. I soldered the beaded wire before clamping them in the back.
Michel Couillard
2025-03-05 17:17:42
Facile à instaler et correct
Gerson
2025-01-26 15:15:27
Good product
Recommended Products