Your cart is empty.
Your cart is empty.Product Description
Overview:
The stainless steel feeler gauge is used to measure the gap size. When checking whether the measured size is qualified, you can use this method to judge, or the inspector can judge according to the tightness of the feeler gauge and the measured surface.It is mainly used for checking the gap value between two joint surfaces.
Features:
Made of stainless steel, high strength
Scale clear, easy to use
Metal fastening screws, durable
Tips: Please don't put on the humid environment.There is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty.
16 Blades Angle Feeler Gauge
You can dissemble the feeler gauge into pieces. Metal fastening screws are durable to use.
Clear Size Text
Each piece of stainless steel piece of the feeler gauge has a marked scale, clear to read and not easy to fade.
Can be Bent Freely
The blade is thin but durable, can be bent freely,not easy to deform or break. Suitable for measuring hard-to-reach area or gaps.
There is anti-rust oil on the stainless steel feeler gauge to prevent it from rusting.
Wide Application
45° Angle Feeler Gauge Is Easy To Check The Valve Clearances. Suitable for Designers, Engineers, Mechanics to Measure the Thickness of Tappet Clearances, Spark Plugs Gaps, Bearing Clearances, Piston Ring Gaps and Other Hard to Reach Places.
Veronica
2025-09-05 17:39:49
These are fine and get the job done. There is a overly generous amount of some kind of toxic oil covering the entire tool that was annoying. I took the tool completely apart and soaked it in Barkeepers Friend for about 10 minutes then rinse well and it cleaned off the oil making it safe to use. For the price you can't go wrong just be aware of the toxic oil depending on what you plan on using it for.
Katie P.
2025-08-29 19:21:02
I night this specifically for setting valve lash on our 06 Accord V6. This made it alot easier.
Susan Blattert
2025-08-19 13:30:11
It came as described, haven't had time to re-gap valves on my side x side. Will update later
Sean
2025-08-15 17:30:31
This is a great tool to buy for price and to use with 3d printing!
Pam
2025-08-09 14:20:58
Purchase this item because I had to change a head gasket on my lawnmower. I used this gauge to reseat the valves. Thje accuracy is spot on. The lawnmower runs great. The feeler gauge is stainless. Easy to use.
Steve owens
2025-07-30 16:36:24
just what i needed
W. F.
2025-06-29 13:12:16
It works like it should. Only negative is that the writing is hard to read and looks like it will rub off with repeated use.
bob miller
2025-06-09 21:15:01
Nice back up set.
My Chuy
2025-04-10 10:43:15
Bastante útil el ángulo de las lainas , ayudan mucho en lugares de acceso difÃcil.
Randy L.
2025-02-21 15:28:08
Works great.
kenneth gibbon
2025-01-27 18:21:37
Great price and quality
El Trab
2025-01-26 16:13:26
Gute Lehren, die ihren Zweck einwandfrei erfüllen ....
john hughes
2025-01-23 18:39:00
Es ideal para mà ya que tengo un auto más antiguo, que es todo imperial, y un auto más nuevo que es métrico, también está en un bonito estuche y también tiene una cubierta blanda de plástico, por lo que a diferencia de mis galgas de espesores anteriores, hay ¡No deberÃa haber motivo para que se oxide!
Recommended Products