Your cart is empty.
Your cart is empty.Keep your plates off the floor and right where you need them with the CAP Barbell 2 inch Plate Rack. Made for either home or commercial use, this rack offers ample storage for 2 inch plates, keeping them off your floor and right where you need them. Constructed of heavy gauge steel and powder coated, they look great and will last for years. The durable steel construction and powder coat finish make this plate rack a reliable storage space for Olympic Plates. Securely store and organize various sizes of weights with the 7 different plate posts. This plate rack has a 500 pound weight capacity. CAP Barbell is a leading distributor and provider of fitness equipment. Launched in 1982 with a small inventory of free weights and benches, CAP Barbell has grown over the past 30 years to include more than 700 products in 10 categories. Dimensions: 22L x 19W x 37H inches.
holly
2025-09-03 16:50:25
Great addition to our home gym. Very happy with the price, product quality and faster than advertised shipping. Simple to assemble and very sturdy. The box was in bad shape upon arrival but all hardware and parts were still there.
Ryan Moody
2025-08-26 15:18:09
It is easy to assemble and very sturdy. I put 4 of my 45 pound plates on one side thinking it might make it tip over but not at all. It holds all of my weights and works great.
J
2025-08-24 11:47:00
We got this CAP rack to hold our CAP Olympic plate weights (5s, 10s, 25s and 45s). The price is right and it's sturdy and well-made and fits the CAP plates perfectly. No problems.All it took to set it up was putting two leg brackets on with four bolts. Of all the things we've had to assemble, this has to be one of the quickest and simplest. Use your wrench because it doesn't cinch down by hand and real tools make all assembly jobs easiest.We keep finding ourselves coming back to the CAP weightlifting products and they have never let us down. We don't have other plates from other lines on the rack so we can't speak to the fit on those. Also, we aren't storing any single weights over the 2-45s but it's holding a pretty good accumulative amount of weight.We are very happy with this plate rack and so glad to have the plates off the floor. This is much more practical and safer. The price was one of the lowest we found, if not the lowest.
kenya Garcia
2025-08-05 12:47:37
The CAP Barbell Olympic 2-Inch Plate Rack is a space-efficient storage solution for weight plates. Constructed from "heavy-duty steel" with a powder-coated finish, it offers durability and resistance to rust. The rack features a tiered horizontal design that maximizes vertical space and provides easy access to plates. Assembly is straightforward, typically taking 10 minutes with basic tools. This rack is a valuable addition to home gyms, offering organization for weight plates.Concern: Potential Issues with Structural IntegrityWhile the CAP Barbell Olympic 2-Inch Plate Rack is generally "well-regarded" for its durability, I have concerns regarding its structural integrity under heavy loads. The rack's ability to support a substantial number of weight plates without without failure is imperative. This lack of robust structural construction could raise concerns about whether the rack can handle the maximum load without compromising stability or safety over time. Ensuring that the rack is loaded evenly and not exceeding its design limits is essential to maintain its structural integrity and prevent any potential issues during use.Rating: 4/5
iller abramov
2025-07-15 18:37:04
Great price, built very well, assembled easy, you just need an adjustable wrench 🔧. Fits perfectly against the wall with plenty of clearance for plates.
lauren
2025-07-07 10:00:06
Easy to put together and works great!
Bennie B.
2025-06-19 11:43:08
Love this weight tree. It’s great value for money. I appreciate that it’s tall enough to be comfortable to use. Easy assembly using four screws/washers/nuts. Sturdy build quality!I also love/appreciate the fact it has numerous slots for weight plates.
BManley
2025-06-12 12:29:10
This plate rack was number 3 of trial and error. Not to say that I am picky ( I am), but the rack needed to do primarily three things; save space, build completely, and hold the weight. This rack did all three perfectly, here is why:This rack has a flat profile fitting on the floor along a wall in limited space. Not triangular, not round, nothing hanging in the way. I have 280lbs on this rack that fits perfectly and holds the weight very well.This rack is only THREE pieces, two feet and the primary rack angle. Bolts through the feet into the rack, and done (maybe five minutes build time total from opening the box to disposing the box in the recycling). Unlike many other racks, the weight holder arms are welded to the frame, not screwed on in some less than desirable fashion that sags under the weight is supposed to hold (reason #2 why 2 other racks were returned).Last but not least, profile. I needed this rack to hold weight out from behind my bench area due to limited space. This rack has flat profile with a lot of storage room for plates of all sizes. I recommend roughly 260-280lbs for this rack and you will have no issues. With the flat profile, I have set it on the floor next to my wall between two dumbbell stands. I have plenty of space to take plates off and on the rack without bumping everything on and around the rack.This rack cost a couple of dollars more than the two I returned, but worth every penny, and I should have gone with it from the start. This rack is perfect for me in my space available, I think you will like it as well. I recommend this weight rack.
Rafael
2025-06-10 17:03:01
Funcional y pequeño.
sam aylott
2025-05-19 15:20:29
Very happy for the price but which the lower poles were fixed a little lower for plate clearance.
Darren
2025-05-17 16:33:25
Owned this for a few days now. I was a little skeptical at first because of the very thin corners of the triangle area near the base. Turns out, its actually pretty sturdy with some of the weights I placed on. Some of you have probably viewed the smaller version of this which is the 1 inch CAP weight holder thats around $35-40 as it seemed smaller and sturdier. This one turned out a little taller than I thought and that some of the photos from other reviewers threw me a bit off on size estimates even though I saw exact product measurements listed in the description. For those that want a better idea of plate sizing, I wrote in the weight number in the photo I took. I can tell you it can easily fit 45lb plates on either side (if I had any) and then you just have to account for the size that goes above it. I believe overtime the rack was scratch the steel surface because of plates going on/off the rack. I don't see how you can run from that as its just the way it is. In any case, this thing was easy to put together as long as you have a wrench to tighten those bolts. Very happy with the purchase although, I wish it was a little cheaper for the value. Like I mentioned earlier, it was a little taller than expected and my only wish was to have it a little more compact in a way to make space for. Good luck on the decision making :)
Cumple muy bien con el cometido, está resistente
2025-05-13 18:47:50
Soporta bien discos grandes y pesados
MAG
2025-02-17 15:48:27
Assembly is required but is super easy, you just bolt the legs on the weight tree; however, word of caution - DO NOT over-tighten.I was tightening with tools, by hand, and the one side was great, bolt got to a spot that felt tight but the other side just didn't seem to want to stop, almost felt like it was spinning on the spot so I flipped it over....the leg part of the stand was being bent in from the bolt so it looks like I put a golf ball underneath the leg and drove a tank over it, there is a BIG inward dent in the leg. The metal is not overly sturdy in that regard so just keep that in mind, this would not stop me from my purchase, it is still a great addition and I still have to give it 5/5 for the price vs performance.This thing can support a total of 500lbs, more than enough for me!The issue doesn't seem to change the stability at all as it does the job and does not move around or shake, you can tell the dent is there but it is strictly cosmetics.
Recommended Products
$89.99
$ 38 .99 $38.99