Your cart is empty.
Your cart is empty.Product Description
P Type Lead Clip on Wheel Weights
Single Boxes
- From 0.25 oz to 3 oz each
- OEM approved clip designs
- Common weights for steel rims
- Easy to install and remain solidly attached
- Applicable for Passenger Cars & Light Trucks, SUVs/Vans & Full Size Pickups
4-Size Bundle Pack
- From 0.25 oz to 1 oz (25 Each)
- 100pcs/ box, 25pcs/ style
Necessary Tool
- A professional wheel weight hammer/ plier for your easy installation
Installation Instruction
Select the Correct Application
Using a wheel weight
application guide, select the
correct application for the
vehicle you are servicing.
Check that the weight
application is correct by
testing the placement on the
wheel flange.
Placing the Weight on the Rim
Place the wheel weight in the correct loaction of the
imbalance. Prior to striking
with the hammer, make sure
that the top and the bottom of
the clip are touching the rim flange. The body of the weight
should not be touching the
rim!
Install the Weight with a Hammer
Once the wheel weight is
properly aligned, strike the
clip with a proper wheel
weight installation hammer.
Please note that striking the
wheel body could result in
clip retention failure or weight
movement.
Checking the Weight Fitment
After installing the weight,
check to make sure that it is
secured properly.
Customer 523
2025-08-07 15:18:36
Good tire weights!
Tiff
2025-08-06 17:04:25
We own a garage and these are our go to for steel wheels
Customer
2025-07-15 20:50:38
work good
Akelliabowen
2025-05-26 11:01:01
It's good
phil
2025-04-10 11:07:25
As described.
michaelwq
2025-04-04 13:07:30
The tire weights are of good quality and easy to install for my tires. They came with a great deal and a must have for anyone who balances their own tires. Highly recommendï¼
Adam
2025-03-11 20:50:10
I used these weights to balance the lower wheel on an old bandsaw. I bought the bandsaw used and it vibrated badly. I confirmed the source of the vibration was the lower wheel by running the bandsaw without the blade (the lower wheel is driven by the motor, and removing the blade means only the lower wheel turns). The upper wheel still has the balance weight that was installed at the factory, but the lower wheel is missing its weight. The original weights are made of lead and are secured by a rivet through a hole in the wheel. I simply added weights to the wheel near the hole, since that is where the original weight would have been, and ran the bandsaw without the blade, adding one weight at a time until the vibration stopped. I tried some old adhesive weights I had, but they didn’t stick very well because the wheels are cast iron and are rough. I decided to try clip-on weights because the wheels have a lip inside the rim that they can clip to. I had to bend the clips open because the lip is thicker than a car rim. They worked perfectly.
shawn sieminski
2025-03-03 09:09:04
Great product fit as it should
Alex H
2025-02-20 17:38:43
The product is like it is in the description.
YOUSSEF Sukkar
2025-02-06 14:06:53
good and cheap
andre dionne
2025-01-24 20:56:38
satisfait
Eric vaillancourt
2024-12-18 17:16:23
Excellent produit pour roue acier
jocelyn
2024-12-12 12:47:44
livraison rapide boite bien intact
Recommended Products
$29.98
$ 14 .99 $14.99