Your cart is empty.
Your cart is empty.Product Description
Give your snow blower superior, all-weather protection with this strong cover. Whether you're storing your snow blower in the garage or keeping it in your backyard, the heavy-duty fabric keeps the rain, wind, dirt, and sun from harming your equipment. Elasticized hems provide a secure, custom-like fit and thanks to an integrated storage bag, you can have a clean, organized space when the cover is not in use.
Amazon.com
Improve Your Snow Throwing Experience With Classic Accessories
Rweg14539
September 6, 2025
This cover fits my older Ariens snow blower with room to spare.The cover is lightweight but is reinforced at key points. With a little care installing and removing (so as to not cut it on any sharp edges) , this cover will last a long time. I have had the cover for a year now and it just like when I first got it. The elastic bottom has not loosened a bit and still holds it well in place. I do not have a garage so I use the cover all year to protect the blower from the elements.I would recommend this cover to anyone. Great product at a good price.
MPH=CA
August 28, 2025
It's size is a little smaller than my new Smart Power 24 but it fits well. There is a tag saying "FRONT". Put it on the inside front and the built-in bag holder will be on the inside when installed. It even covers the wheels. HAPPY !!!
John M
August 25, 2025
It's a little thinner than I thought it would be, I imagined it as more like a grill cover but its more like a raincoat. I bought it for a 22" snowblower that I leave on my deck to clear it and it fits it just fine, the elastic bottom is a plus. I dont think it would fit my 24" machine too well which while only 2" wider is a much larger/heavier machine overall. I'm a little worried about the drive and auger engagement handles eventually wearing though, I may throw a plastic cup over each before putting the cover on so that they don't have such a sharp edge on the cover. There is a built in pouch that the cover stores in but it seems like it would be a pain to fold/roll it to fit. Time will tell how well it lasts in the weather for now, this fits the bill. It was relatively inexpensive, fits well and is certainly water proof and a lot less hassle than the huge plastic bag that I used in the past.
Mushroom Hunter
June 30, 2025
This cover is absolutely awesome! I ordered a cover from the place that sold us the snow blower. After one good gust during a nor'easter, it took flight and ended up in the woods - found by a hiker, the same day this cover was delivered. Well, the one that took flight makes a fine bike cover and I could NOT BE MORE PLEASED with this cover. It fits nice and snug and it's not made from cheap plastic. This is a quality cover for very fair $$.It's roomy enough to cover the whole unit, but it has a nice tight fit at the bottom, no way will it take flight like the old cover did. It sheds water, snow and ice.The seller deserves better because he shipped me a quality product in a very timely fashion and it took me till now to finish my review. I highly recommend this product and when I'm in need again of this type of product I'll gladly shop this seller first!
Rich Barron
June 15, 2025
Didn't like the snowblower not here
Tom Metro
May 21, 2025
I had previously used a grill cover from Lowes as a snow blower cover. It was inexpensive (~$15), constructed from moderately heavy plastic, with a soft, non-woven polyester lining. It fit pretty well. Looked like it would be pretty durable. But within 2 years, the plastic degraded from UV exposure and cracked everywhere. Even before that, the sharp points on the blower (handles, shoot) started to damage the cover.I mention this just as a point of comparison, because when this cover arrived, I was surprised at how thin the material was. No lining at all. It was so thin (and just slightly stretchy) that I at first thought it was simply a sheet of plastic with an embossed pattern, but on closer examination of an edge, where I could spot some fraying, I could see it actually was woven from fine threads.Given this, I'm pretty skeptical that it will hold up. Although if the material is tear resistant, and adequately UV resistant, it doesn't need to be thick or lined to do the job. Only time will tell.They did bother to double up on the material in a few places, such as over the shoot, which should improve the durability, but oddly they didn't bother to double up the material around the handles, which often have pointy levers and ends.If you hold the cover up to the light, you'll also see light streaming through all the pinholes made by the stitching on the seams. (Some seams span across the engine.) What's worse is that the manufacturer/importer (Classic Accessories) warns in the instructions not to use soap when you wash the cover, otherwise you will "remove the protective coatings added by the factory." Which means rain exposure is also likely to eventually wash off that coating. So I'm doubting how well it will remain waterproof and am planning to use plastic to cover the blower's engine, and use this cover to shield the plastic from UV exposure and keep it from blowing away.It doesn't feel like a $30 product. More recently I looked at other grill covers at Lowes that cost more than the original one I used, but less than this product. They used a coarse woven nylon like material - more like a canvas - and with a lining. Much more durable in appearance than this product, and what I was expecting this product to be.On the up side, it fit my compact 24" Snapper with plenty of room.I would recommend this if you are looking for a dust cover to put over your snow blower while it is stowed in your garage. Something you'll remove once in the winter and put back in the spring.It doesn't appear to be a good choice to weather protect a blower that is stored outside.
Mary & Bobby
May 1, 2025
We have had this cover for over 13 years now. It fits good over the 26 inch Toro blower. It gets very little sunlight in the garage, so it has very little fade. Easy to put on, easy to take off. Recommended.
Daniel P.
March 31, 2025
Will use this more during the off months to protect a snowblower when not being used.
Andy
March 29, 2025
Awesome! I don't know how other people review but I call it as I see it, this is a great cover, we have a 30 in 2 stage snowblower and it fits perfect!. We didn't want to 'struggle' to put it on nor have it form fitting so that you would be freezing in the cold trying to put it on. Its fits over the entire machine including the handle bars down to the ground. The price was the cheapest I found, the material light but seems durable, I am not expecting to get 10 years out of it though.
Renman
March 23, 2025
Originally purchased this cover in Aug 2019. It it November 2021 and it has developed a slight tear in it and has faded a fair bit. This cover is great for keeping the elements off your blower. I bought another to replace the old one that probably would last another season. But $50 Canadian for two years is great value and since I use it a lot( even start it in summer which means removing the cover) I have no problem spending that money for peace of mind.I have read many reviews that state this item is too tight and doesn't fit properly.This is the way you want it to fit believe me! Nice and tight so that it doesn't blow away or flap too much.I have a two stage Simplicity 24 inch thrower and this cover fits perfectly! If you have a larger blower , it will probably fit as well. The width can go more(maybe 36"?) its front to back that is tight. All you need to do is make sure that the part of the cover that has the "front" label on it, goes towards the front of the machine. Begin by sliding the back of the cover over the handles about half way to the ground. Then stretch the "front " label over the auger. Next pull the part over the handles as far down as it will go. Then pull the front as far down as it will go. That's it!The elastic bottom cinches nicely around it for a great fit! I keep my chute in the 'up' position and it still fits.Perfect for outside storage.
Donald Moogk
January 6, 2025
I am very pleased with this cover. I was little awkward trying to use it for the first time. I actually thought at one point that it was way too small. But, it is not. I love the elastic around it. It fits very well to the blower and is very wind resistant. The day I installed it was extremely windy and the blower stays outside. Never came off. I constantly had to re-install my old cover on windy days.
A reader
December 14, 2024
Bought in 2019 and I have to look for a new one this year. 3 years isn't bad but I was expecting a little more. Full disclosure, it was left out year round and is extremely sun-bleached and ripped in several places.Pros: Great fit and keeps the unit dry. Easily fit my 24-inch two-stage snow blower right down to the ground covering to the bottom of the front of the unit and still able to tuck under the tires at the back. For the price, it is a relatively good cover.Cons: Sun-bleached and ripping in several areas and that was with taking care when covering the snow blower and easing it on. The rips occurred in locations that the wind would push it against edges on the machine (handles and chute). For the price, I suppose I may have expected too much from this cover.
wcharl
December 3, 2024
Covers my Sears craftsman 28" blower, its a bit snug but it has stayed one during strong wind storms. Put a heavy chain on it just in case for extra weight.
Recommended Products
$23.99
$ 9 .99 $9.99
$102.95
$ 47 .99 $47.99