Your cart is empty.
Your cart is empty.Product Description
NOTICE:
- Please do not put the device beside the heat or interference source;
- Please avoid falling, collision or pounding during usage;
- Don’t expose the device in rain or moist environment;
- Mono and stereo inputs cannot be used simultaneously. Only one type of input can be selected at the same time.
The “L” and “R” gain buttons independently adjust the gain.
So if the microphone is inserted in the “L” area, the volume of the microphone is controlled by the “L” gain button.
If the microphone is inserted in the “R” area, Then these microphones are controlled by the "R" gain button.
Fresh and Felicia
August 28, 2025
The media could not be loaded.
24Peter
August 6, 2025
The media could not be loaded.
Chris Sgaraglino
June 28, 2025
The media could not be loaded.
Lokvideo
June 2, 2025
Me ha encantado todo de este aparato quizás un poco pasado de precio pero de calidad exuberante un 9 de mi parte si le doy diez no lo mejoran asà que un 9 el envÃo tardo un poquito pero no demasiado.
pietro
May 23, 2025
Molto pesante ma ottimo mixer x le macchine con ingresso minijack
Don
May 5, 2025
Does what it says it does.I used it with a shot gun mic with phantom power and a regular lapel mic with transmitter. This does a great job if you use for interviews.Save $$ on getting a digital recorder.
Hemzy
April 8, 2025
Without listing all my personal requirements which would take up a long time, I'll just say this; it does what it claims to do and does it well. There are YouTube videos showing the various ways of using it and its utilities so I won't go into that. It's a robust, well designed piece of kit and does what it claims to do. I'm very satisfied.
karlfish
January 16, 2025
Purchased for a specific project. This is a 4- channel (2 stereo input) pre-amp and mixer designed for cameras.Pros: easy to use. Can wire 4 mics at a time. Flexible inputs (phantom power, +3V switch for electret mics, etc.). Solid all-metal construction. Great features.Cons: You can't adjust relative volumes of input 1 and 2. There are only L/R volume knobs. The 1/4" tripod mount bolt at the top wasn't properly threaded so I couldn't get my camera flush with the rubber top. I had to Dremel the threads down. I should not need to do this. Bad luck I guess/poor QC. I was able to get it working. Also there was lots of noise on one channel I was able to eliminate by just switching my lavs around. That should not be. The preamps are a bit noisier than I'd like, but you get what you pay for.Summary: useable, with a few problems.
Recommended Products