Your cart is empty.
Your cart is empty.COR Surf has been a leader when it comes to storing standing paddle board shelves for over 19 years! If you spend hundreds or thousands of euros on a new board, make sure you store your board properly! The double wall mount from COR is a very durable surfboard holder. It is very easy to install and use. All you have to do is snap the arms into place and it's ready to go!
SurfCaster
2025-08-31 10:33:09
I installed this over the weekend. It's simple but really nice. The rack looks good and is super sturdy. It came with heavy duty wood screws but i was installing on a block wall in my garage so i used 1/4" sleeve anchors instead. I have a total of 4 surf boards and a boogie board on it.It seems like it would hold up well outside as it's all powder coated, but I'd expect the spring steel push buttons would rust if exposed to the elements for a couple years. I am using inside so no worries in my application. No regrets with this purchase .
RJ
2025-08-10 13:53:57
It holds the kayak and sup! Installing it was easy and it looks great!
Nicole O'Shaughnessy
2025-08-06 16:52:09
This was easy install, but did require some knowledge of hanging items. This doesn’t come with detailed instructions but if you know to find studs, you’ll be able to figure it out. I did have some issues with one of the bars that was supposed to slide onto the wall part. The bar was too wide for the opening. Thankfully I thought to hammer at it and was able to make the necessary adjustment without compromising the stability. The screws provided are sturdy enough but likely poor quality. If you’re not careful when drilling they could strip easily. Despite the install issues, I give this 5 stars because it’s exactly what we needed and looks great in our garage!
T. T.
2025-07-26 10:32:39
I just installed this rack and as soon as I put my paddle board on the arms they bent. Not sturdy enough for a light board. Would not recommend.
T
2025-07-24 10:41:15
Excellent quality materials. I used tapcon cement anchors in place of the screws the kit cam with. I mounted these in a utility room - install took about fifteen minutes. The horizontal support rods are retained with sturdy spring clips, similar to a beach umbrella. It's a nice feature, as you can remove your boards and support rods quickly if you need to clear the storage area around the boards, etc. The horizontal supports rods have good quality foam that doesn't slide and soft plastic end caps for protection. I store a 6'4" short board and a 6'10" fun shape on these racks. Barely touched what these things can hold weight wise. No problem recommending these.
David
2025-07-10 15:34:52
Great paddleboard rack, but be careful with supplied hardware/bolts. Hang at your own risk if you are using the cheap bolts that are included. They snap. I suggest spending $0.15 each and buy four (4) new lag bolts. The size is 1/4" x 2-1/2".The rack itself is high quality, sturdy and durable. This rack also has a great foot print. The rack shelves are 10-1/2" apart, which is the perfect size to stack two boards INCLUDING the fin.The overall value of this product would be greatly increased if they spent an extra 40 cents cost and included quality bolts. Many people use these racks to hang their paddleboards in garages over cars and equipment. There is too much risk using these bolts.
sdgz747
2025-06-23 11:20:07
I have been searching for a sturdy metal surf rack for my surfboards for a couple of weeks. I was finding wood and plastic products I didn't trust. I happened to stumble upon COR Board Racks on Amazon. I haven't heard of COR Board Racks, but I have found their product to be very sturdy and well made. The product comes with the required hardware for installation. Keep in mind, you may have to make changes based on your setup. In my case, I had to purchase longer lag bolts for a secure hold. I also found the four surfboard support arms to be very tight fitting. I don't mind the arms being snug, it adds to my appreciation and reassurance of COR Board Racks. I rotated the arms until they were close to the locking position and I used a rubber mallet to get the arms locked into place. Make sure to remove the rubber end-caps before using the rubber mallet, otherwise the end-caps will be ruined. Overall, I'm extremely satisfied with the product and would highly recommend the product to anyone who asks.
SebastienM
2025-05-23 21:42:25
When I put the paddle board the arm bent down right away.
Client d'
2025-05-21 13:10:29
Super produitBelle finition
Benjamin Weindel
2025-05-05 14:56:26
erfüllt seinen Zweck, gute Verarbeitung.
Customer
2025-04-10 10:44:22
Excellent product, 2 SUP’s and a 7’ board stores easily.Easy to fit (with extra rawl plugs)
Cliente
2025-02-03 15:51:52
Il pacco era semiaperto e in pessime condizioni, ma il contenuto è ok
Customer
2025-02-01 10:44:22
Very easy to mount and hold 2 boards no problem!
Recommended Products
$129.95
$ 62 .99 $62.99