Your cart is empty.
Your cart is empty.Daystar Comfort Ride 0.75" Rear Coil Spring Spacer Kits are designed to improve ground clearance, allow use of large tires and enhance the performance of the vehicle. They are made from high density polyurethane that ensures long lasting durability. These kits facilitate easy installation.
Marineguy
August 23, 2025
High quality American-made product. Easy way to add 3/4" to the rear suspension. Although they were designed for a Tahoe/Yukon, they also work on Envoy/Trailblazers with coil springs (non-air suspension).I have an Envoy Denali which originally had air suspension in the rear and 245/60R18 tires (the only vehicle I know that uses size). Now that the vehicle has been out of production for six years, the selection in that size is limited. I had to do a 2" suspension lift to fit a more common truck tire size; I ended up going with 265/65R18s, which is the standard Z71 Silverado tire. I installed coil springs and a BDS 2" lift kit. The kit did raise the front a full 2", but only raised the rear 1 1/4 inches. The squat was noticeable, despite being less than an inch of difference.So I ordered these. With spring compressors squeezing the coils, they slipped right in. With most vehicles, you won't even need to compresses the springs, but since I have a metal BDS spacer installed above them, I had to. Usually jacking the vehicle and unbolting the shock will be sufficient to remove the spring or install these spacers.
Joseph Merkel
August 21, 2025
After replacing rear springs and STILL having a slightly sagging rear on my Suburban, these babies lifted to a level look and helped with the view out the rear view mirror!
Mike
August 16, 2025
Used on my Tahoe to level the rear with the front. Fits as it should and done the job needed
w8ing
August 14, 2025
I bought this spacer hooping it will eliminate driver side (Chevy lean) in my 2012 Yukon.It fit spring seat and spring perfectly, it did barely noticeable leveling,i wish i got 1 inch instead of these 0.75'' , they lift driver side like 0.30''.If your truck leans and you can see it when standing behind the car i suggest you go with 1 inch or higher.In term of material they are well made and feel solid.
Chumba Wumba
June 3, 2025
Does what they are supposed to, look pretty well made
Heiny 5
May 13, 2025
they brought up the rear of my avalanche to the old ride height after I out spacers under the front shocks.
IS
May 4, 2025
doesn;t fit and they won't tell you the size of the ring - really?
Bigfoot
April 29, 2025
I'm giving this a 4 star because it was a little difficult to install. The overall look was great and so far the ride doesn't seen to be affected by it. This kit is a must have for anyone running a front leveling kit. Allowed me to run 33'' tires on my yukon with from 2inch kit and rear 3/4 kit.
Colin
April 8, 2025
I found my 2004 escalades 6†lift kit always looked sagged in the rear due to the wheel wells being an 1†lower. Adding 3/4†spacers to the bottom of the coils was the perfect way to level out the wheel wells and make the truck looks way more balanced. However, I needed to use coil compressors because I couldn’t get enough clearance to put in spacers.
scott
February 25, 2025
Used these on the rear of a 1980 Impala. Gave me the desired height adjustment at a fraction of the price that other vendors are offering with comparable products. GM likes to use tried and true engineering principles from previous makes. Pays to do a little research regarding parts interchangeability.
Ryan T
February 17, 2025
installed on an 08' avalanche. Year in, some deformation. Still working fine, but they will die with the truck, no reusing these. Can't complain for the price.
Matt
February 1, 2025
Got them for my civic because the rear was sagging. Does the job. No problems so far and not hitting the bump stops and more.
Buff Lake
January 20, 2025
no problem at all
Recommended Products
$170.00
$ 77 .99 $77.99