Your cart is empty.
Your cart is empty.DEI has launched the next generation of heat protection performance! Using a combination of advanced textiles, DEI developed a flexible heat shield solution that looks great and outperforms other conventional heat shields available today. This enhanced performance starts by joining two durable materials together forming a dual-layer design. The outer layer is made from heat-treated glass fiber that is bonded with molten aluminum and then formed into a tight weave for durability and strength. The inside material is made of a specially treated, high temperature resistant fabric (89% silica) designed to withstand some serious exhaust heat. The outer edge is finished off with a surge stitch for durability. All hardware is stainless steel. The result is a product with very good thermal performance up to 1350°F, with an eye catching rich black finish. This proprietary textile technology combined with DEI's unique shield standoff bracket design provides the maximum potential for cooling and heat dissipation. In addition to external applications protecting legs and boots, Flexible Pipe Shields can also be used as a barrier between the exhaust and plastic bodywork, suspension components, or electrical harnesses. They will fit many applications and because the shield remains flexible, it will fit most pipe diameters.Standoffs create air gap for maximum heat dissipation
Armands F
August 20, 2025
I own Husqvarna 701 Enduro motorcycle, original heat shield of that bike covers only rear part of exhaust pipe that runs at height of ankle and does its job real well. However when you fall off the bike and that happens on frequent basis when riding mountain single tracks pipe just burns holes in your pants melts plastic on boots and eventually you get tired of it. Melted bits on pipe do not add to aesthetics of bike. So this appeared to be perfect fix. It still gets very hot and you will not be able to hold your finger to it more than 2 seconds, however it is not hot enough to burn through things any more. And that solves my issues completely. I will add picture later. Looks good on bike. I do strongly recommend it good value for money.
Sean
August 2, 2025
Good product like it keeps the heat off of my wife's leg.
mtsaner
July 15, 2025
Ended up getting 4 of these in total they do come with brackets to install they are massive luckily I had smaller ones to replace it with only issue I have is they are filled with fiberglass so installing it wear gloves and once it heats up and cools down it stiffens so real hard to re adjust but they work great still feel the heat a little but no longer getting burned I recommend
rhonda n.
June 30, 2025
This has helped me a lot with the heat on my leg . Put on after market pipes and boy they will fry u and this has made riding much easier
Alysia Nicole
June 20, 2025
Exactly what I needed. So I have a 2001 jeep cherokee (xj). It's been lifted 2.5 inches to get rid of the shitty, small, stock tires and put in some Yokohama 30's. Small enough lift to look natural with the bigger tires, but apparently enough of an issue to make the exhaust hit the leaf spring. The exhaust hanger could be taken off and replaced with some janky rig made of clamps but I didn't want it jumping around with a temporary fix. Figured this would be perfect. Can't get melted by the exhaust, won't rub away from the leaf spring bolt, and is soft enough to make it stop clanking. It's literally perfect for what I needed. Stopped the noise and it was cheaper/easier than cutting and reconfiguring the exhaust.
Ozzy'sMom
June 18, 2025
Not only was this thing ugly it doesn’t work. It didn’t burn my pants up, but I could definitely feel ton of heat coming through whenever I hit a light. It is hot here in Texas but still you pay 50 bucks or something it should work. I ended up paying $10 for some cheap little chrome cover it works.
JAMES
June 12, 2025
Quality and heat resistance will be fine, just wished you would have sent smaller hose clamps, or at this premium price include a 2nd smaller set of hose clamps. Most pipes are ~ 2.5-3†diameter, these clamps are 5-6†or so and have a lot of excess that doesn’t tuck cleanly leaving bulges. I’m going to need a trip to hardware store to purchase smaller stainless clamps for cleaner install.
Sandy
May 29, 2025
I bought this pipe shield because I was tired of burning the inside of my leg on the pipes. I ride V&N cross over, dual pipes. I'm on the short side so when I put my foot down at a stop I was burning the inside of my leg. Problem now solved!!!
Reviewer
May 4, 2025
Definitely pricey for what it is, but the alternative is just going to be some cheap piece of fabric or metal. Could have provided two lengths of hose clamps. Just be aware that if you are using it to deal with radiant or ambient heat, the shield re-directs it somewhere else, it doesn't just disappear.
Thomas frohock
March 24, 2025
The media could not be loaded.
M Dubois
February 17, 2025
Coupe bien la chaleur
Ed Giesbrecht
February 8, 2025
Boot protection from exhaust
Brad
November 27, 2024
The Factory heat shield had fallen apart and was very expensive to replace, this item deflects the heat better than the original ever did.
Recommended Products
$23.99
$ 10 .99 $10.99
$114.99
$ 50 .99 $50.99
$115.07
$ 56 .99 $56.99