Your cart is empty.
Your cart is empty.Product Description
1", Crimped end wire brush with carbon, highly specified wire grades are constructed with internal holding plate to ensure consistency & safety Constructed for even balance which provides smooth performance, Wire is 100% inspected to meet demanding quality specifications, 1" X 1/4" Stem, 0.02 wire gauge, 1/4" Stem Arbor size, Maximum speed is 20, 000 RPM, Knotted wire is for heavy material removal, crimped wire provides flexibility for light removal of rust & paint & general cleaning.
From the Manufacturer
DEWALT DW4901 1-Inch Crimped End Wire Brush
Gator
September 4, 2025
quality material and strong
Vance
August 24, 2025
Works as it should as I keep a stock of these on hand in my shop.
SJK
August 10, 2025
This Dewalt wire brush is decently made and works well in both my drill and die grinder. The bristles are stiff enough to remove light rust and paint scale without gouging metal beneath like a knotted brush can sometimes do. It seems to be retaining its bristles well and is holding up to my use, so would certainly buy again when needed.
Carol C.
August 5, 2025
I bought a nice cast iron pan. Once I finally used it, I found the interior to be extremely rough making food stick to it. I had an idea that I could sand it down with the correct tool, so I got 2 different kinds. I still haven't found someone to do it for me, but I'm ready! :)
Levi Houston
August 2, 2025
This was fantastic and has outlasted the cheap ones by 8-10x.... Still using the first one and have cleaned upper and lower control arms, spindles, 4 head light buckets, etc.... The cheap ones only last about one wire wheel per item cleaned.
Lynelle Duncan
July 22, 2025
These don't last long at high rpm. I bough these and the knotted version. These are far more aggressive but last maybe 15min in an air angle grinder (18k rpm or so). The knotted versions are far more robust, but do not shed material nearly as well.When these wear they actually become pointed, which is somewhat useful for a short time until they are shot.
M. GUERNSEY
June 16, 2025
Used this to prep some metal on a Chevy 4wd prior to replacing cab corners and rockers. Used with an air tool @ 120lbs and it gets down to business fast. I had used dinky wire wheels to clean small pieces but this SOB gets your metal ready fast. Took less than 4-5 minutes per side to prep
Bobby Matteson
June 13, 2025
This goes in my electric drill and cleans battery posts. It’s a perfect size for jobs around 1 inch. I used it on my old car bumper to remove some rest. It lasts a long time. It seems to be a good product I’ll let you know more later.
Robert Gadbois
May 26, 2025
This wire brush is so handy when working in tight areas or small projects. The quality is very good and I have been using it regularly.If you have a die grinder I would strongly recommend buying this quality piece, even you don't have much use for it, its there and dependable when you do need it.
James Svendsen
April 15, 2025
Works well . Use protective eye ware
Trianon
March 27, 2025
It works, but not very durable. The bristles are bending after a few uses.
Michel Bertrand
March 12, 2025
Remove the rust.
Just A Consumer
February 5, 2025
Good product
Recommended Products
