Your cart is empty.
Your cart is empty.Ben
2025-06-03 21:44:49
I needed to extend the exhaust port of my diesel heater to outside and this did the trick. It was long enough to serve as the whole exhaust, minimizing the joints and couplings which could result in leaks.
Consumer Safety
2025-05-03 14:42:10
I ordered this flexible pipe to extend the exhaust of my generator (Firman 7500w tri-fuel) through my garage wall to the outdoors. The diameter of my exhaust outlet is around 3/4 inch.The pipe diameter is almost/not-quite 1 inch (25mm is translated to 0.984252 inches) as my own measurement affirms (see photo). Now I need to find a way to connect it to the generator with some sort of flange. This tubing seems to be a little heavier-duty than a different one I purchased earlier.This pipe was shipped to me in a paper envelope with no other support (to me this is a very poor packaging job). Amazingly, it arrived with no observable damage. But if the pipe gets dented or crimped, it will probably be impossible to remediate other than returning it and ordering another one (a risk that I would think the seller would want to avoid). It would be better if they rolled it into a circle and put it in a flat box versus winding it with abrupt turns that will be harder to straighten out.
TheLastAndTheCurious
2025-04-12 14:02:44
I use this for routing the exhaust out of a window that is several feet away from the diesel heater. The construction is good, but it comes folded up so you'll have to un-bend about every 16" which can be awkward.When using with a diesel heater on medium setting, the first 4-5 ft will burn your skin for sure. When using on the lowest setting, the furthest end is about as warm as a mug of coffee, easy to hold.FYI if using around plastic, those first few feet will melt plastic and lead to terrible smoke and smell.Overall this 10' version is the best bang for your buck, you can cut it to be shorter, however you'll lose the nice smooth end where you clamp it on to an exhaust port.If you run the entire 10 foot length, you don't really need a muffler, the sound is very muffled already.
ihaveastory6132onutube
2025-03-27 18:24:19
The pipe is heavy and well made as far as these pipes go but mine came with mangled ends and sharps jagged edges. Took some bending and cleaning up the ends to get them to fit and they are a tight fit which is a good thing once the ends are cleaned up, straightened, and wiggled on. It bends easy but also holds shape. It's ok but should come with clean straight ends.
Jay
2025-03-26 12:45:13
Works but pipe is seriously dented in multiple areas.It looks as if it was smashed on the floor prior to shipping.It should work but also very stiff so you need to be careful bending them back straight or a tear may happen.It does fit my 8kw chinese diesel heater.
Patrick Garon
2025-01-27 17:31:20
The pipe came in good shape, no crushed areas, just small malformations near the end, but those are to be expected and are easily fixed, the important part is that the length of the pipe has no dents or crushes in it, so the flow will be nice and clear. and for nearly 10 feet, I think the price is right, the pipe seems to be as soon as the pipe that came with my diesel heater, and After testing, there were no leaks within the entire length. Overall great product.
Daniel S.
2025-01-05 16:42:11
This does what you'd expect it to and fit my diesel heater just fine. The exhaust pipe is not that thick which is good/bad. it's somewhat flexible so that's a good thing but I worry about longevity with the thin metal wall thickness. It does mis-color and brown up quickly as expected as well. Overall, I'm happy enough with this.
Pamela J Seeley
2024-12-05 15:18:01
Perfect fit for my parking heater, very long and durable material, easy to install and works great.
Recommended Products